Why wont my SR line up on the mounts?

[Tearlessj]

This is about as close as I can get. This is AFTER switching the driver side mount to the passenger side mount(Rubber ones on crossmember) . I took some pics for reference.

Passenger Side:

http://img242.imageshack.us/img242/9855/99725384lz2.jpg

http://img143.imageshack.us/img143/6314/67569504jm8.jpg

Driver Side:

http://img150.imageshack.us/img150/249/70643478vd9.jpg

http://img249.imageshack.us/img249/2230/72976080yc3.jpg

Tranny mount:

http://img150.imageshack.us/img150/1518/19087596ub1.jpg

Im pretty stuck rite now, Im sure I can get the passenger side on but the driver side would be completely off. Help please! :(

[Sileighty_85]

dude you need to bolt the Motor mounts to the engine it will work alot better when dropping it in

if you look at the K-member you will see its slotted for when you lower the engine in

[used240sxparts]

ya put them on the motor and save your self some trouble

[justaKAiswear]

dude you need to bolt the Motor mounts to the engine it will work alot better when dropping it in

if you look at the K-member you will see its slotted for when you lower the engine in



+++++++1 SHould drop straight in after you do that. :bigok:

[Abstrak0ne]

When you bolt it to the motor, just tread it a couple treads. Let the mounts dangle. Then drop the motor. It'll save you a bunch of time.

[Tearlessj]

Wow prybar and muscle does wonders. My motor is finally in now! Closing thread. Thanks for the help!