clutch install, what bearings to buy??

[scooz14]

hey guy
i have a new clutch and flywheel waiting to be installed

A. should i buy new bolts for the clutch and pressure plate.
B. i need a throw out bearing, what it the other bearing i should replace
C. where is the best place to buy these items.

thanks a lot guys
Matt

[maxgohan]

need to know aswell!

[!Zar!]

Uhh. Go to your dealership. They should have what you need.

If not, courtesy nissan or superior nissan. So many places to go.

The only bearings that are replaced are the pilot bearing and the throw out bearing.

Buying new bolts is a good idea, but not mandatory. Really depends on the condition of them once you take them out.

While you have the flywheel off, I suggest you change out your rear main seal.

I suggest getting new flywheel bolts once you remove them.

[flip3d]

Rear main seal, input shaft seal, throwout bearing, pilot bearing (i recommend the needle type bearing), clutch fork pivot. Dont forget to lube everything. Personally I like using the Motul tech grease. Works wonders.

[Jbma327]

You would want to change the throw out bearing as well as the pilot bearing or pilot sleeve, and rear main seal while your at it. Might also want to put a some anti-seize on the fork pivot.

[Sr20det>Ka24de]

go to nissan and get this part 88854-8S572 and a A7221-0W000 don't mess with aftermarket these are the stock replacements

[scooz14]

thanks a lot guys!!