Z32 5 lug help

[LongGrain]

hey, in case you havent seen my thread, i am trying to trade my advans for a decent 5 lug setup and i had an offer but i wanted to make sure this will all bolt right up. so who better to come to than the 5 lug guru's on zilvia. so heres what i'm wondering.

i have a 4 lug s13 obviously.

he has front and rear z32 hubs, Q45 calipers and rotors, s14 rear rotors, Z32 wheels and tires, and basically an entire z32 to pull parts off of that we might need.

he told me all this will bolt up and get me ready to drive away but i just want to make sure this stuff will fit. i dont want to get stuck tearing my car apart and then nothing fits and i cant drive my car. so any input is helpful.

[rps13drift]

only 300zx non turbo rear hubs will fit. The 300zx front wil not work! you will need oem s14 or conversion hubs wich imo are better. Everything else you listed is perfect though!

[clark]

hopefully it's an na z32. and if it is, you CAN'T. i repeat CANNOT use the front hubs.

if it's NA, you can use the rear hubs, brakes, ebrake assy.

the S14 rear rotors will bolt onto the z32 rotors, and you can still use your stock brakes..

q45 calipers is a nice upgrade too

if this dude is parting out a z32 get the MAF and BMC also and sell them if you don't need them.

the rear knuckles aka. uprights are aluminum and are a common upgrade.

but for front 5-lugs you can use oem s14 spindles, but you'd have to change yourr lca's and the spindle housing...eff that...just get the ichiba hubs, make sure you take them to a shop and get them repacked with grease.

[PhilthyS13]

You will also need spacers for the fronts if you choose to run the z32 wheels. Otherwise they rub. I'd say at least 10mm.

[LongGrain]

hmm, this is kindof a bummer. i was pretty excited about this deal.

[projectRDM]

How long have you been here? You should know better than to post such remedial shit.

[5t341tH]

You will also need spacers for the fronts if you choose to run the z32 wheels. Otherwise they rub. I'd say at least 10mm.
i ran the z32 wheels with no spacer at all. no rubbing-but that was with 205/45