S14 part out, big name brands and JDM gear.

[Koopa Troopa]

SPL lower rear arms - $800 shipped
SPL lower front arms - $600 shipped
SPL rear traction arms - $200 shipped
Cusco upper rear arms - $280 shipped

Take it all for $1700 shipped.

33 GTR Brembo's with Apex*i 2 peice rotors, Endless pads, Swage lines and Cusco master cylinder brace (front only) - $700 shipped

Juran bottom mount seat rail for the same LH with Recaro adapters, this rail is super low, like sitting on the floor low - $50 shipped

Bottom mount seat rail RH - $50 shipped

Ikeya Formula ITB kit, plenum needs to be rewelded, will explain to potential buyers - $1800 shipped
Topline Aragosta dampers 9.6/6.3 springs rates (Maybe Friends version? No wrenches) - $2000 shipped
Kakimoto Mega N1 exhaust (muffler and resonator were hacked out to remove the insides and then rewelded) - $400 shipped

Prices are somewhat OBO but don't try and lowball my ass cause I'll just tell you to fuck off. Pics can be sent to serious inquiries only. If you don't got the cash then don't waste my time. :bigok:

Items are also listed on the local forums as well.

[s13pignose]

sounds like some nice stuff...glws

[jsasrsr]

pm sent!!!!!!

[Koopa Troopa]

Pm replied to, I also have

Stillway 0-400 shifter for SR - $600 shipped
2 SR20 MAFS - make and offer
SR20DE throttle body - make an offer

[elixirvtec]

PM SENT requesting pics

[Koopa Troopa]

Also have a harness for S14 SR20DET for Motec M4 ECU. Comes with Stock ECU as well. Give me an offer

[hustlervibes]

Very interested in the Topline Aragosta coilovers. How many miles are on them and aprox. how old are they? Do you think another spanner wrench from tein/hks/generic coilover will work?

[Koopa Troopa]

Fuck if I know but they look brand new. Yeah, another spanner wrench will work.

[hustlervibes]

Is it these ones you posted about in the rare S-chassis parts thread?

http://www.upgarage.com/upgarage/gazou/0711/0711104001076/0711104001076s0.jpg

[Koopa Troopa]

That'd be it.. No clue why I don't have wrenches with them though...

[Koopa Troopa]

I really need to get rid of this crap...

[xdumbxguyx]

is the throttle body for s13?

[Koopa Troopa]

The SR20DE SHOULD fit S13 manifolds.. I have never tried however I am 99% positive it'll work.

[floodo1]

damn d00d i've never seen such high end stuff all together in one thread.

too bad d00d cant do math
SPL lower rear arms - $800 shipped
SPL lower front arms - $600 shipped
SPL rear traction arms - $200 shipped
Cusco upper rear arms - $280 shipped

Take it all for $2000 shipped.
800 + 600 + 200 +280 = 1880
hate to say it but any buyers should take advantage of OBO action

price on aragosta's is the win, anyone that can come close to affording these should hop on it. buy these an no one can hate.

[GSXRJJordan]

Edit: been calling people the wrong names all day ~ let me get some pics of the RH (us passenger side) rail - I'll prob pick that up. Another bump for the super legit parts.

[ZOMG_S14]

pm sent and stuff

[Koopa Troopa]

damn d00d i've never seen such high end stuff all together in one thread.

too bad d00d cant do math

800 + 600 + 200 +280 = 1880
hate to say it but any buyers should take advantage of OBO action

price on aragosta's is the win, anyone that can come close to affording these should hop on it. buy these an no one can hate.

Thanks... 2000 was the first number that came to my head. if someone where to offer $1700 I prolly wouldn't refuse.

[Koopa Troopa]

I also have some

JDM zenki headlamps
Kouki center garnish
JDM zenki tails (no garnish)

Make an offer

[99maxgtr]

can i get pix of the headlights taht are retrofitted witht he bmw porjectors?
nvm i read wrong....

[azndummie]

do the brembos bolt on or is there alot of mods to make it fit?

[Koopa Troopa]

can i get pix of the headlights taht are retrofitted witht he bmw porjectors?
nvm i read wrong....
I am using them for my new car... I really do need to update the list. Sorry

do the brembos bolt on or is there alot of mods to make it fit?


Yes but you must run a specific wheel to clear the calipers...

17x9+30.. or better but the wheel must be a 17"

[mrmephistopheles]

send me the fuel pump, Koops. PM me your paypal addy, plz.

[Addicted2Kouki]

aw i wanted the fuel pump.
oh well.

if meph backs out. i gotcha.

[Sir]

LMK if Jordan didn't get the side mount rails.

thanks

[Koopa Troopa]

Updated prices and items still for sale

Buy my shit, I need to pay for tattoos, Alto crap and a trip to Miyazaki next month..

[Koopa Troopa]

One last bump... Shoot me an offer as I'll be taking all this shit to Up Garage in a couple of days.

[Enna]

Interested in the kakimoto exhaust, can you please pm me pics. LMK shipped to 89108. Thanks.

[Koopa Troopa]

SPL lower rear arms - $800 shipped
SPL lower front arms - $600 shipped
SPL rear traction arms - $200 shipped
Cusco upper rear arms - $280 shipped
Buy it all and I'll cut you a deal
33 GTR Brembo's with Apex*i 2 peice rotors, Endless pads, Swage lines and Cusco master cylinder brace (front only) - $700 shipped
Juran bottom mount seat rail for the same LH with Recaro adapters, this rail is super low, like sitting on the floor low - $50 shipped
Bottom mount seat rail RH - $50 shipped
Ikeya Formula ITB kit, plenum needs to be rewelded, will explain to potential buyers - $1800 shipped
Topline Aragosta dampers 9.6/6.3 springs rates (Maybe Friends version? No wrenches) - $2000 shipped
Stillway 0-400 Shifter
5 lug hubs with 20mm studs and weds aluminum lug nuts
rear hicas subframe with SPL aluminum bushings and diff bushings and hicas bar

I got drunk with the girlfriend the other night and may or may not really be needing the money.. Any serious offers will be considered.

[Ceepo]

Can i get a picture of the zenki headlights???

[Koopa Troopa]

Sure... I also have some BMW E46 HIDs retrofitted in USDM headlmaps if you're interested. PM me an email address you'd like pics sent to and I'll send some tomorrow after work.

[kaaos]

send pics of hid retrofitted headlamps to [email protected]
and bottom mount lh seat rail

[luvsr20]

^^^ same pic of the head lights to [email protected] thx