Parting Out Sil-80

[plucky]

There comes a time in life where you just have to make sacrafices, and this is mine. I have always dreamed of growing old with my sil-80. I used to chuckle to myself when I thought of myself being old and grey and in the garage pulling off the car cover for my childrens friends, watching their mouths dropped as it reveals a fully restored and preserved sil-80 that would make even a non-enthusiast wet his walmart boxers. From the moment when I shot my KA rods out through the block to when I first saw the site of sea salt on my silvia clip as it arrives from the land of the rising sun I have loved it and will continue to love it after it is gone.

In life, things never work out as planned. So here I am parting out one dream to achieve another. I am building a recording studio and have thought long and hard about this. Finally after two years, I have come to the conclusion that I will part out my sil80. I am on a tight budget and must reach a certain limit on my sale so please do not try to low ball me. Prices are firm and will work with you if you are are slightly short on cash. Just don't offer something really rediculous.

Here it is:

***Enkie Meshes 15s 0 offset with very good tires: $200

(the wheels aren't that good, but because I payed 200 for the tires and didn't get to use them much, i would like 200.)

***1 pc Aluminum drive shaft, Non ABS: $295 or 250 with trade for stock

***SAFC II, silver: $185.00

***Greddy Intercooler: $ 350.00 (sorry no cold pipe, or at least not one that fits a regular SR manifold. Modified it to fit Greddy intake manifold...sorry not forsale either, unless you want something that was rigged but i refuse to sale crap, unless you just want it.)

***BEE*R Exhaust, 3 inch custom mandrel bent pipes, eliminates cat, bolts all the way up to downpipe: $180.00.

(a little banged up from when the car was lowered by works perfectly fine)

***3 inch Megan racing downpipe: $50.00

***3 inch Megan racing turbo outlet: $50.00

***S-13 rolling chassis: maybe, let me know if you're interested. make offer.

***FET turbo timer: $45

***SR retop, swap ready (all wires, ECU, Tranny) with Greddy intake manifold, Enjuku Racing exhuast manifold, T-25. Fidanza lightweight flywheel, Greddy Main pully, and BEE*R polish valve cover.

(make an offer on this, I'm really comtiplating on throwing this into the AE, will only sale if price is right, sorry I will not part out the parts on the motor).


Thanks for looking, I am located in Plumas lake, 30 minutes north of Sacramento. If you have any questions, please call me. I do not pick up number I don't know, but leave a message and I will call you back.


Will post pictures tomorrow when I start stripping the car and get done silently crying to myself at a corner of my shower stall like Jim Carry in Ace ventura. Just kidding. but i will post up pictures after i get done taking the car apart. Thanks for looking and reading.

P.S.
ALL PARTS SOLD AS IS, PLEASE DO YOUR RESEARCH BEFORE PURCHASING SO YOU DON'T WASTE YOUR MONEY OR MY TIME. THANKS.


call Plucky: 530-520-3655
email: [email protected]

[KiLLeR2001]

A+ well written, would read again.

[TRUSE-R]

Sent you an e-mail...;)
Late,
KEN

[SammyGreen]

Im interested in the downpipe if your willing to ship all the way to bumsfuck wisconsin. let me know man! PM sent

thanks a lot!
Sam

[MrFairlady]

Very nice...Recording Studio is a Dream of mine...I have the Fisher Price "My 1st Studio" going on @ my Place.

WOuld Like to see exhaust and would you ship it??
Is it a canister/cannon type or Muffler Type

[Oo_Skyline_oO]

post up some pics, I might be interested in the chasis, or kouki tail lights if you have them

[diomedes]

Bump for my fam....

Plucky is legit and one of the most trusted guy I know. Anyone dealing with him will [EDIT] be super happy.

[G-Force]

2nd dibs on the aero bumper if the first buyer passes on it.

[Antihero983]

free bump. as a musician i can appreciate the sacrifice you're making.

and as far as the SR goes, keep it and throw it in the AE.

[JohnnyDrfiter22]

Can i get dibs on the profec price shipped to 08106.

[timlush]

Do you have s13 coilovers for sale?

[HS13KLS]

interested in the FPR

glws

[mymymys13]

i dont want to throw out a too low of a number for your sr, im interested give me a number so i can get an idea how much you want for it.

[Jaketenpointo]

Holy crap. You're in Chico. Well your profile says you are but the thread say youre not. Im interested in the lights and aero bumper.

Free bump for a fellow Chico Sil80.

[huffandpuff00]

pm'ed you about driveshaft and 6 point cage :97007

[SR2Zero]

I want to see pics of the roll cage!

[mestizo]

Who makes the drive shaft you have?

[thestreetzking]

any possibility of shipping wheels without tires?

[an_orange_s2k]

if you decide to part out the silvia hood i'll take it. i can pick up

[Broadfield]

I'll take 3rd dibs on the aero bumper! I can even pay you a deposit via Paypal!

Toby

[SIXSEVENONE]

Sent you an e-mail...;)
Late,
KEN
i wonder what did mr ken order?:naughty:

[DALAZ_68]

323-5747-555 i can trade my driveshaft... wheres ur driveshaft from...

also intrested in turbo elbow that connect to DP if u have one...

[plucky]

Killer2001- thanks. i appreciate the love.


Note to everyone: Sorry if I haven't got the chance to provide any pictures or if I haven't gotten back to you. I'm serving everyone on a first come first serve basis.

Pictures will be up soon, Mothers day had my hands full this weekend so I wasn't able to get to digging the parts out. but I will be taking all the parts out this coming weekend.

The reason for that is because my car is at my parents house and I work out of town so I only have the weekends to work on it.

I will be checking my email while I am out of town so please if you have any questions, just shoot me an email. write to my hotmail because I don't check my zilvia mail as much. Thanks.






Ken-I wrote you back.

Sam-I believed I reply back to you also. let me know if you didn't get anything. thanks.

MrFairlady-Sorry, I will try to post pictures of the exhaust as soon as possible. I would ship it but you will have to cover the postage.

SKyline- yes sir, pictures of chassis coming up soon.

G-force- got you on that, 2nd dibs on AERO bumper.

RedEvilRPS13- yes, throwing the SR into the AE is 90 percent right now.

JohnnyDrifter- Profec E is pending at the moment. I will let u know if it falls through, thanks.

Timlush-Sorry, no coilovers for sale.

HS13KLS- FPR is pending at the moment to a zlivia member. If things fall through, i will let u know. thanks.

mymymyS13- Let me sleep on this one. thanks.

jaketenpointo- I wrote you back. the bumpers and lights are pending. if they fall through, i will let u know. I think you're third in line for the Bumper but 2nd in line for the headlights.

huffandpuff00: will check pm asap, but at the moment...the cage is pending. drive shaft, you are first on the list.

SR2Zero-Pics coming soon. sorry the mothersday weekend had me caught up.

mestizo-I'm not sure who is the maker, I bought it off a friend. but it fits real well, sorry, I will try to get a name on it for you. thanks.

thestreetzking- sorry, will not do wheels without tires. thanks.

an orange S2K- sorry i probably won't be parting the hood. thanks.

Broadfield, toby- I believe you are 4th dibs on the areo bumper. sorry.

Dalaz 68- sorry..all parts you are inquiring are pending. thanks.

[nissan240sxkid]

I want rad email sent....

[kissritz]

Since we are both musicians and building a rec studio, I have a couple of things i dont need, maybe you might want. I have a Beringer Mixer and Numark direct drive Turntable. willing to do trades?? pm if intrestd

[eerrrrr]

bump for u pluck, ill come grab those stuff this weekend. ill call u.

[DALAZ_68]

Dalaz 68- sorry..all parts you are inquiring are pending. thanks.

DAMMIT to hell...lemme know if anythign falls thru

[strongbads240]

any pics of the meshes??? 200 shipped?? i work at fedex so possibly cheaper shipping rate

[plucky]

sorry if i haven't gotten to anyone yet. there's been a overwhelming amount of messages. again, i will not be able to provide more pictures until i am back home this weekend. here are some pics i took in the past, but they are in the same condition as my car has been in the garage for the past two years and only turned on on the weekends for a drive around the block.

http://i5.photobucket.com/albums/y175/pluckyxiong/sil80front.jpg

http://i5.photobucket.com/albums/y175/pluckyxiong/sil80enginebay.jpg

http://i5.photobucket.com/albums/y175/pluckyxiong/sil80interior.jpg

http://i5.photobucket.com/albums/y175/pluckyxiong/sil80_back.jpg

http://i5.photobucket.com/albums/y175/pluckyxiong/sil80interiorback.jpg


steering wheel not for sale..but i do have a greddy boost guage, the big white one that reads in bars. I will decide on the price of that once i get home. forgot about that.

thanks and please be patient, i am out of town at the moment.

[suh240sex]

got pic's of the Meshes im interested in them

[joshchewuhh]

got pic's of the Meshes im interested in them


i second that

[happy408]

5th dibs on areo bumper! and how about that hood

[Jaketenpointo]

Oh man, I really hope everyone falls through on that bumper. Its white and I want it. Any suspension stuff? Z32 brakes? Coilovers? Strut/sway bars? I'd be interested in it.

[Hawaiian240]

PM sent for FPR.

[grexs13]

want your cage. hit me up.

thanks!

[HS13KLS]

is that FPR sold?!

[mike-hkc]

i want Meshes

[nissan240sxkid]

I will buy rad send me pm with paypal

[plucky]

VERY IMPORTANCE NOTICE:

I cannot ship anything at the moment due to my work schedule. Work pretty much has me from 730 in the morning till 7 at night so i have absolutely no time to go get quotes or ship anything. If you are locals, please let me know as i need to get rid of these parts. thanks and sorry to all those who have inquired but will require shipping.

will have pictures of meshes up this weekend when i go home. thanks and call me if there are any questions. thanks.

sales pending are:

AREO BUMPER
HEADLIGHTS
CAGE
FPR
and RADIATOR,

other than that, all are still available. thanks.

[eerrrrr]

aero bumper and brick head lights SOLD to me!!! now go buy all his other stuff.........

[plucky]

here's the update..and my apologies if i haven't gotten to anyone. i am only available on the weekend as i am away for work on the week days.

anyways, i am only dealing with pick ups at the moment as my schedule haven't cleared yet to allow me to ship anything.

If you are interested in parts, please don't email me. just call. I have limited access to the internet and cannot get back to you as soon as i would like to.

here is the update, and please pardon my poor pictures, they are from my phone, it was all i had at the time:

***Enkie Meshes 15s 0 offset with very good tires: $200

(the wheels aren't that good, but because I payed 200 for the tires and didn't get to use them much, i would like 200.)

http://i5.photobucket.com/albums/y175/pluckyxiong/tiretop.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/tireside.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0525081345b.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0525081351.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0525081345.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0525081345b.jpg




***1 pc Aluminum drive shaft, Non ABS: $295 or 250 with trade for stock.

***SAFC II, silver: $185.00 ((((((((((PENDING))))))))))))))))))))

***Greddy Intercooler: $ 350.00 (sorry no cold pipe, or at least not one that fits a regular SR manifold. Modified it to fit Greddy intake manifold...sorry not forsale either, unless you want something that was rigged but i refuse to sale crap, unless you just want it.)

http://i5.photobucket.com/albums/y175/pluckyxiong/0526081153.jpg
don't mind the bugs, it's all in good working condition.
http://i5.photobucket.com/albums/y175/pluckyxiong/0526081153a.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0526081154.jpg


***BEE*R Exhaust, 3 inch custom mandrel bent pipes, eliminates cat, bolts all the way up to downpipe: $180.00.

(a little banged up from when the car was lowered by works perfectly fine)

http://i5.photobucket.com/albums/y175/pluckyxiong/0526081155.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0526081158a.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0526081157.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0526081157b.jpg
a little lovin on the logo brings it back to life...it's just dust...you can clean.

***3 inch Megan racing downpipe: $50.00

***3 inch Megan racing turbo outlet: $50.00

***S-13 rolling chassis: make offer.

***FET turbo timer: $45

***greddy white face boost guage: $89
http://i5.photobucket.com/albums/y175/pluckyxiong/0526081201.jpg

no, it's not crack, it's dope..just looks crack in the pic thanks to my poor camera phone. sorry.

***Wedge engineering seat bracket: This one was for my sparco seat. fits driver side s13. Not sure if it will fit other brands.
please research before buying. $50.00

http://i5.photobucket.com/albums/y175/pluckyxiong/0526081202a.jpg
http://i5.photobucket.com/albums/y175/pluckyxiong/0526081202.jpg



PLEASE CALL IF U REALLY WANT A PART, LEAVE A MESSAGE AND I WILL CALL YOU BACK. THANKS.
I CANNOT STRESS THAT ENOUGH, I HAVE LIMITED ACCESS TO THE INTERNET. THANK YOU.

530-520-3655

[Iwant2slide_S13]

very interested in the cage, is it approved for events? sick car btw

[turtl631]

Interested in megan outlet, but it would need to be shipped since I'm in Chicago.

[plucky]

iwanttoslide- thanks, too bad it has to go. as for the cage, it's been sold. sorry.


turtl631- sorry, due to my work schedule, i just can't find the time to ship since my hours are from 730 in the morning till 7 at night. if a saturday opens up and i can ship things, i will let u know. thanks.

plucky

[Wake]

i dont know where i am in line but i got dibs on the aero bumper and headlights if no one else takes em

[plucky]

aero bumper and headlights are sold. thanks.

[Iwant2slide_S13]

awwww:bash: , oh well, good luck sellin the rest of ur stuff, id buy the exhaust but i need it to be shipped, oh well... GLWS

[510skater]

Plucky the driveshaft is pending for me right?

give me a call when you have time to arrange pickup

[mike-hkc]

are u close to los angeles

[mike-hkc]

are u close to l.a

[Kougeki]

I'll send you a PM regarding the Enkeis.

[Lumos]

Will that roll cage work in a coupe?

[plucky]

iwanttislideS13- yeah, sorry. sorry about the shipping issue. i just can't find the time to do it. thanks for the good wishes, appreciate the love.

510skater- yes sir, let me know if you can do it this weekend. thanks.

mike-hkc- sorry, i'm about a good 7-8 hours north of LA.

kougeki- thanks, will wait to hear from u.

[mike-hkc]

damn that sucks for me

[s13_slider]

Shoot me a PM if the downpipe is available. I'm very interested with money ready. :)

[johnw1415]

ya, how much for the cage..

[a_ghost]

you got a pm about the shell

[rotarypower]

Im sorry if I didnt see but do you still have the sr swap?

[1japsil40]

still got the intercooler

[sileighty92]

just wondering are if you're parting out your fenders.

[bobalacs13]

do you still have the rims and if so any pics??

[racerx2k1]

Last Activity: 02-27-2009 10:46 PM