PDA

View Full Version : Parting out S14/SR20 setup, lots of parts...


Turbocoop
05-07-2008, 12:29 PM
The shell and motor swap are sold, along with the tranny, ECU, igniter, clutch, harness, tein coilovers... If I cant find someone to swap wheels with in the next week or 2 the SE-R wheels are gone too

I was gonna keep the turbo to use on my truck but it turns out its too small for a 6.0L, I figured out what kind it is though- Its a Precision SC61 52RE, theres one on ebay right now for over $1100. This one is brand new, its just been installed on the car for over 1.5yrs so it looks old. The specs are .60ar compressor housing with a 3" inlet, .63 exhaust with a T3 flange, and a 5-bolt DP flange. I think its good for over 600hp. Its worth over $1000 new and Im selling it for $700

TurboXS RFL bov- $100 shipped

Tial 38mm wastegate- $125 shipped (I think its got a 7lb or 10lb spring)-
dump tube for the wastegate includedSOLD

Top mount manifold with T3 flange, its not an SSautochrome or OBX cheap one, I got it from someone who made it custom and the welds look good and strong, its got a high temp black coating too. $450 oboSOLD

FMIC with all aluminum TIG welded intercooler piping, with flange welded in for TurboXS RFL BOV- $250 obo (or $300 with BOV)

Z32 MAFS- $60 obo

JDM S14 Silvia front grille (no emblem)- $25SOLD

radiator overflow tank- $20 OBO

JDM S14 front bumper with amber turn signal lights and all mounting brakets and stuff, and with the plastic covers for the holes next to the middle opening- $100 pick up only

JDM S14 trunk lid with LED spoiler- $50 pick up only

17" Sentra SE-R spec-v wheels with tires spray painted black (looks like crap I didnt paint em)
$200, but I nees some steelies or something to put on it

3" stainless downpipe with 5-bolt flange for turbo with slashcut tube welded in for crankcase evac hose-- $175 oboSOLD

Ill take $30 for the aluminum master cylinder heat shield I madeSOLD

The blue thing next to the intake manifold is an adjustable FPR with pressure gauge- $75 obo

The gauges in the console are boost, oil pressure, afr, and water temp. $175 for just the guages and all the wires, plastic tubing for the boost and the water temp sender and the carbon fiber dash panel.SOLD

I also have a new apexi rev-speed meter- $125

The SAFC 2 is used, I had it in my old civic and it was working fine when I took it out so I know it works- $150SOLD

grenade shift knob (was a real grenade)- $40 obo

battery relocation kit with box/ wires and connections and extra maxi-fuses for up front (I put em in the stock fuse box) $50

2 M/T drag ET slicks (15x twenty something Ill look later) mounted on wheels that fit the 240sx lug pattern - 4x114 I think- $150 obo (used but still have plenty of passes left on em)

Taillights- make offer

I prefer paypal, my ID is my email- [email protected]

I am located near Hilton Head, SC (45 minutes north of Savannah, GA)

Thanks for looking, Jason

http://farm3.static.flickr.com/2197/2456497803_c23f6d5a44.jpg
http://farm4.static.flickr.com/3212/2457326512_96c921171e.jpg
http://farm4.static.flickr.com/3238/2456500879_e90d94204f.jpg
http://farm3.static.flickr.com/2165/2456502405_71b59f615c.jpg
http://farm4.static.flickr.com/3103/2457331240_4014eb637e.jpg
http://farm3.static.flickr.com/2233/2128408173_ae6f435ea4.jpg
http://farm3.static.flickr.com/2161/2128407303_1fcbe970fc.jpg
http://farm3.static.flickr.com/2093/2129183080_de52c43803.jpg
http://farm3.static.flickr.com/2148/2129181820_64491e3735.jpg
http://farm3.static.flickr.com/2379/2128403769_4e8c2b4c7a.jpg
http://farm1.static.flickr.com/224/491728051_1fdca4b58d.jpg
http://farm1.static.flickr.com/207/491709698_3be2ac8d26.jpg
http://farm1.static.flickr.com/167/412816165_5c5979facc.jpg
http://farm1.static.flickr.com/181/412815581_858e957803.jpg
http://farm1.static.flickr.com/157/412814174_d423fa4526.jpg
http://farm1.static.flickr.com/181/412813069_2621b9600a.jpg
http://farm1.static.flickr.com/123/387430894_fc72e971da.jpg
http://farm1.static.flickr.com/53/387427560_d4f5a6ded1.jpg

jinesz32
05-07-2008, 02:03 PM
ill take that carbon fiber 5 speed trim/bezel, let me know ;)

Manhitbytran
05-07-2008, 06:00 PM
Can i have better pics of the manifold?

Go180sx
05-08-2008, 01:23 AM
pm sent...............

Turbocoop
05-08-2008, 07:05 AM
Can i have better pics of the manifold?

Ill get some this weekend, the turbo is still mounted on it right now

don_bagz
05-08-2008, 08:47 AM
pm sent!!!!!!!!!!!!

240love
05-08-2008, 08:51 AM
30 shipped for the shift knob?...its not gonna blow up is it? haha

Turbocoop
05-08-2008, 08:56 AM
30 shipped for the shift knob?...its not gonna blow up is it? haha

pmd you about it

Turbocoop
05-08-2008, 01:06 PM
Ive got a SPEC 6 puck clutch kit too but its already installed so its not coming out til I get the motor and tranny out.

nzmoman
05-08-2008, 04:02 PM
another PM'sent

Turbocoop
05-08-2008, 07:24 PM
heres more pics, I took some stuff out today:
http://farm4.static.flickr.com/3200/2476611965_814d45847d.jpg
http://farm3.static.flickr.com/2193/2477423768_8bebec2b2c.jpg
http://farm3.static.flickr.com/2007/2476612895_337a68ce1a.jpg
and theres the manual boost controller- $25 shipped obo

Turbocoop
05-12-2008, 10:50 AM
The bottom part of the intercooler is painted black cause that was hanging below the bumper and I didnt have a lip to cover it up
http://farm4.static.flickr.com/3243/2486249773_aeb0fd11aa.jpg
http://farm3.static.flickr.com/2103/2487069800_c3e571aa60.jpg
http://farm3.static.flickr.com/2046/2486255321_3d4098bcb4.jpg
http://farm3.static.flickr.com/2382/2486257433_8495987a65.jpg
http://farm4.static.flickr.com/3189/2487076350_ef10e15327.jpg
http://farm4.static.flickr.com/3239/2487078404_aa0593b8ca.jpg
http://farm3.static.flickr.com/2416/2487080474_7e56ff8197.jpg
http://farm3.static.flickr.com/2401/2487082262_c4434cafea.jpg
http://farm4.static.flickr.com/3155/2487084222_c1de270c09.jpg
http://farm4.static.flickr.com/3269/2486292483_5b4405e0fa.jpg

Turbocoop
05-12-2008, 05:47 PM
http://farm3.static.flickr.com/2170/2487974522_6faf743f97.jpg
http://farm4.static.flickr.com/3179/2487311903_cc82d6279b.jpg
http://farm4.static.flickr.com/3275/2487164049_1b8ca3989e.jpg
http://farm3.static.flickr.com/2258/2487983580_d033f5b67b.jpg
http://farm3.static.flickr.com/2082/2487155977_bbed863190.jpg
http://farm3.static.flickr.com/2372/2487111306_91540c3b76.jpg

Turbocoop
05-12-2008, 05:56 PM
I made that carbon fiber glovebox, I was gonna put the CD player in there. Ill sell it for $30, I dont remember what kind of CD player that metal frame was for though so you might have to change it out

geecue2005
05-12-2008, 06:15 PM
PM SENT :Ownedd:

fromxtor
05-12-2008, 06:42 PM
what SR is the ECU for?

Turbocoop
05-12-2008, 06:48 PM
I guess its for the blacktop S13- its says E5 on it and below that its says- 23710 50F05

wickedS14
05-12-2008, 07:06 PM
pm sent!!!!!

surge s14
05-12-2008, 09:01 PM
how much for power steering bracket and adjuster

Turbocoop
05-13-2008, 11:54 AM
how much for power steering bracket and adjuster

I have a sale pending on the swap and shell so that stuff will go with the swap, sorry

GTS
05-13-2008, 01:46 PM
Interested in battery relocation kit and intercooler piping. $150 shipped to L4Z 3T9?

mifesto
05-14-2008, 07:11 AM
a good pic of the radiator overflow tank please. wanna see if its in relatively good condition.

Turbocoop
05-14-2008, 07:56 AM
a good pic of the radiator overflow tank please. wanna see if its in relatively good condition.
I made it myself out of some extra pipe and put some fittings and clear tubing on the side so you can see how much is in there. it doesnt leak though I checked it. Ill get better pics for you tonight.

HS13KLS
05-14-2008, 08:10 AM
is the FPR sold too??

i didnt see it up there or sold..so i was just curious

Turbocoop
05-14-2008, 08:55 AM
No I still have it

Fash00
05-14-2008, 09:38 AM
the radiator is a koyo for sr20 right?

Turbocoop
05-14-2008, 10:36 AM
the radiator is a koyo for sr20 right?

yeah the upper opening is on the driver side for the SR20 and it is a real koyo, with 2 e-fans

Turbocoop
05-14-2008, 10:42 AM
a good pic of the radiator overflow tank please. wanna see if its in relatively good condition.
http://farm3.static.flickr.com/2157/2491941081_1f625c6439.jpg
http://farm3.static.flickr.com/2315/2491943771_b1421b38cf.jpg

Turbocoop
05-15-2008, 11:39 AM
to the top, still have a bunch of stuff for sale

s13in843
05-16-2008, 08:42 AM
wtf man who are you an dwhere did you come from, I live in beaufort and have a group of 240's here that hang out all the time. oh well too bad youre partin out your car. GLWS

Turbocoop
05-16-2008, 11:13 AM
Ive been here for 10 years, I used to have a turbo civic but I sold it and now I have a blacked out Silverado SS. I dont go to Beaufort often though. Tell your friends to buy some parts, you gotta know someone that wants some spec-v 17s right? I need to get rid of those soon

Turbocoop
05-16-2008, 11:16 AM
Damn I just realized I never posted pictures of the wheels. Ill do that later

de3zy
05-16-2008, 01:16 PM
how much for 5 lug?

99maxgtr
05-16-2008, 01:28 PM
info on coilovers???

Turbocoop
05-16-2008, 01:46 PM
Its a 4 lug, and I cant get rid of the coilovers unless I have some stock ones to put back on cause it has to be able to roll onto a trailer to get towed away.

Turbocoop
05-17-2008, 06:30 AM
heres the wheels, the tires are still pretty good:
http://farm4.static.flickr.com/3276/2477429378_66d8e62c30.jpg
If someone is close and wants to drive or meet me somewhere within an hour Ill give em to you for $250 obo, but I HAVE to have something else to put back on the car- I dont care what as long as the bolt on and have tires. No 24's please...

jeprokz
05-18-2008, 05:23 PM
Check your PMs please!

Turbocoop
05-20-2008, 07:33 PM
Bump still a bunch of stuff for sale

geecue2005
05-21-2008, 11:15 AM
SAFC 2 SOLD to me :2f2f:

Fast Shipping and SAFC 2 Received in Great Condition Thanks Again :bigok:

Turbocoop
05-22-2008, 10:18 PM
The manifold and downpipe are for sale again, same with the Z32 MAFS

Turbocoop
05-29-2008, 02:10 PM
Nevermind the manifold, DP and oil lines are sold. Bump again for everything else- its all OBO now so just PM or email me

sliderdie001
05-29-2008, 03:27 PM
Hey i think i did some work on this car when it was at gsc is charleston any way i might be able to pick up those SE-R wheels only thing is i only have some stock s13 wheels with tires so if your interested pm me

Turbocoop
06-01-2008, 06:06 PM
Heres the TEIN coilovers, I need to sell em asap but I do need OEM ones to put on in their place:
http://farm4.static.flickr.com/3093/2542503479_39ea711b39.jpg
http://farm4.static.flickr.com/3159/2543325638_fc4afe318d.jpg
http://farm4.static.flickr.com/3067/2543329502_82c6a05476.jpg

Turbocoop
06-17-2008, 05:18 AM
BUMP, I know someone needs a FMIC and BOV. Also the Z32 MAFS is still here, just make an offer

99maxgtr
06-17-2008, 05:25 AM
what kind of tiens are they, i have the oem shocks and springs.