WTB: OEM Rear 5 lug (hub/bearing) for S13

[MrFairlady]

They need to be Exact bolt on for S13 & S13 brakes axles etc.No Z32's that are supposedly too long/short for the axle.
If you have Full 5 lug lemme know as well,.. but Looking for OEM Rears
w/ Hubs/bearings.Must be in GOod shape.

[MrMcgarrett]

I thought you wanted to buy mine?

[MrFairlady]

I thought you wanted to buy mine?
well I'm new to the whole 5 lug deal and not 100% what works w/ what...someone told me the Z32's "Bolt" up but do not meet w/ the axles w/o modification - as they are too short or too long or something.

didn't want to jump on something w/o knowing for sure.

I/he may be wrong but he happened to let me know that bit of Info.I just don't know what works.Planned on Ichiba on all 4's but would rather know I have OEM's on the drive wheels and not go through a;ll the Drama of swapping all the other stuff for the fronts (probably risk thowing a Wheel off on the front:keke: but who knows) for OEM.

[drift925]

S14 and Z32 Non-turbo (the z32 twin turbo ones are the wrong ones) bearing + hubs bolt right up to s13s. Take the 4 19mm bolts holding your stock s13 bearing off and put s14 z32na bearings on, no mods needed.