very odd wheel spacer problem

[jsasrsr]

So I am doing the brembo swap on my s14, and I have wheel spacers holding on my rotors. I took the oem calipers off and sold them so all i have is the spacers bolted onto the lugs. It spins, so how could i get them off? does anyone have any ideas? and i dont have an impact wrench

[Leetheslacker]

have someone hold the brakes.

or put a crowbar through the lugs and against the ground and go nuts.

[IRN]

just get a wrench and slip the box end on one of the studs. wedge it and you should be good.

[brndck]

big ass prybar.

[posdrift240]

Use common sense!!!

[clark]

get a pipe or a 2x4 and wedge it between the brake pedal and your driver seat. do this while the car is running so the brakes work better. you can adjust your seat also to press on the brakes firmly.

EDIT
oh shit i just realized you said you took your calipers off....my bad...

yeah get yourself a crowbar and get creative. i've gotten away with sticking a screw driver through one of the vents on the rotor.

maybe you can also get funky with a C-clamp.

[ladiesman8527]

invest in a compressor and impact gun.