Fastback Boot?

[eamonj25]

Is there anything out for the s13 fastback, to make the shift and boot look like this...

http://www.importspeed-south.com/AnthonyTT/DSCN6712.jpg

[West]

I lookin into this a long time ago and found a few things but nothing that is made for our cars. You might find something like this in a simular shape and that can be made fittable on our cars.

Here is all I could find, I know there is another company that makes things like these.

http://www.maniaracing.com/english/index.html

[eamonj25]

I like that whole look, the aluminum frame, the rubber boot, and the shift knob, that is the stock look on an Audi TT, I would love to see that on my fastback... &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'>

[AKADriver]

You can buy the boot and trim plate, find a matching knob that fits the 240SX shifter, then cut your console for it to fit.

I know plenty of people with VWs that have done just that (except for the VWs, the Audi knob just pops right on the stock shift lever)

[eamonj25]

Yea... the whole thing is were can I buy a boot, trim plate that is near the size of the 240 panel... i was thinking of doing it custom, but I dont know which ones are the closest size, and I do not know where to even buy the boots....

I also like the cage look, like ferrari's but I love the audi look &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'> &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'>

[misnomer]

meh

Just yank out your console, you've got the rubbber dust boot under there, looks just like it! Save the aluminum, at least. . . <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>