View Full Version : Will a 15x10 wheel clear 300zx-tt brakes?
godzillarb
04-17-2008, 11:52 AM
I'm looking at stuffing some 325/50/15 drag radials under my 240sx, only issue is that the rear brakes have been upgraded to 300zx-tt. Does anyone know if a 15x10 rim will clear? I still need to measure exactly, but I'm looking at about a +20 offset.
A buddy of mine thought that 15" Weld Draglites would clear, but I'd like to confirm this.
s13silvia123
04-17-2008, 11:54 AM
no you might need spacers about 15mm
LongGrain
04-17-2008, 12:03 PM
brake clearance has almost nothing to do with width and offset. its how the face of the rim is designed.
SW20Racer
04-17-2008, 12:06 PM
LongGrain: brake clearance has almost nothing to do with width and offset. its how the face of the rim is designed.
correct me if im wrong, but wouldn't a wheel with a concave face have the best chance of clearing?
GSXRJJordan
04-17-2008, 12:14 PM
wouldn't a wheel with a concave face have the best chance of clearing?
Yeah, that's what he means. You can measure backspacing on the wheel to get a general idea, but you'll need to test fit them. That's wide enough that you'll be running some body mods, so why do you care if you have to put a 5mm spacer on there anyway?
godzillarb
04-17-2008, 12:20 PM
The reason why I care is that with the 325 tire, even with my 50mm overfenders, things will be pretty close to maxed out. If at all possible, I want to be able to tuck these bad boys and avoid the 4x4 look.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.