check out my custom mod

[crioten]

what i did was remove the back seat and make a custom speaker mounting system. it still has plenty of room for a rear strut bar too, which is great. i have 4,  3-way 6x9" 220watt pioneer speakers. i used the existing swivel mounts from the old rear seat to make a bench that can lift up, and i can store junk and other stuff in. to get the front 6x9's to fit in the front doors, i had to cut some of the door, but not too much. all in all it took me about 13 hours to complete, and $20 for wood and $10 for the carpeting crap for the back area. it sounds really nice, i filled all the little areas with foam, so no car vibrating sounds when it hits a bass note.

tell me what ya think =)

front left speaker

http://community.webshots.com/storage/1/v5/2/22/36/55122236VLGzsS_ph.jpg

rear left speaker

http://community.webshots.com/storage/1/v5/2/22/88/55122288qNMaAj_ph.jpg

rear speaker area

http://community.webshots.com/storage/1/v1/2/23/45/55122345hOUlWH_ph.jpg

outside of my car

http://community.webshots.com/storage/1/v1/2/23/99/55122399nvNROr_ph.jpg

[thelinja]

pics not loading

[crioten]

er, well, they were working. all ya gotta do is right click on properties, then copy the link then paste it into your address bar, it should work then

[s13cruzer]

damn YOU!!!! just kidding i was gonna do that ...eventually but prob never woulda got around to it , lol , mad props to you bro

[xS1LV1Ax]

took a while to load, but It looks slick. &nbsp;GODD JOB!! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

[thelinja]

A hah. &nbsp;There it is. &nbsp;Looks pretty sweet man. &nbsp;I like the rear speaker set up. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

[kandyflip445]

Nice and clean man. Are you gonna do a write up on how you did it? I couldn't follow what you said to well <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hehe.gif" border="0" valign="absmiddle" alt=':hehe:'> .

[xhdriver]

did you use foam in the doors?, what kind of foam? im in the process of doing my doors just like that. looks great <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt=':cool:'>

[crioten]

if you all want me to i could, its not really hard to do. aim me at crioten if ya need help doing it.

and yes i used foam for the doors, i forget which kind, but just go to the hardware store and tell him that you are trying to reduce vibrations...etc. they should know what kind, and i think that it is really neccicary for the doors.

[KiDyNomiTe]

You should do a write up and put it on the site, and if you ever do it for someone else take pics of step by step, since you already finished yours. But that looks good.

And when you said that you used the swivel mounts from the seat so you could store stuff, are you talking about under the piece of wood/carpet where the seat bottom would be?

[Natty]

Sweet car. Looks like mine, minus the spoiler rust, orange peel, and rubebr side moldings <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sad.gif" border="0" valign="absmiddle" alt=':('>
I just said "screw it."
I put 6.5" Pioneers up front and some Cerwin Vega 4x6 panels in the back. Sounds good &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/blush.gif" border="0" valign="absmiddle" alt=':blush:'>
I probably should dampen my door. It vibrates like crazy.
Jeff

[bing]

wow it looks really clean,

now you just have to dith teh pioneers and get MB quart.

you prolly wouldnt need a sub, just a strong 4 channel amp.