PDA

View Full Version : S14 parts, AEM UEGO, knock sensor, AN lines, clear lenses, clutch, flywheel etc.


deuceforty
04-14-2008, 07:36 PM
located in Raleigh NC
phone number is 913-205-0644
email is [email protected]

ive got a BRAND NEW S14 KA24DE knock sensor, paid 120 for it at autozone- 60 shipped OBO

OEM zenki foglight bulbs, the H3c ( ithink) whatever the C ones are, 2 sets here, all work - 40 OBO
OEM zenki foglights- no brackets, will come with bulbs for 60 shipped, will include 4 total, 2 are broken but can be salvaged for parts, the other 2 i had on my car and worked fine, again, 60 shipped OBO

KA24DE oil pan, no dents - 50 +shipping

dual 12" subs in bandpass box, the one at best buy etc. used for a month before i decided track only- 100 + shipping

Pioneer 760watt amp, REAL good... will actually push the 760 watts- 150 shipped OBO

Porcshe genuine brake fluid, basically same as racing super blue- 20 a quart +shipping

Autometer EGT gauge, no sender- 70 OBO
Tenzo R A-F gauge, works fine, just looks pretty though on a 1 wire unheated O2 sensor- 30 OBO

have an APEXi turbo timer, would trade for a greddy turbo timer

have a MA-MS high pressure power steering line, earls fittings (deletes all the rubber lines from the pump to the rack) never used, retails for 150, will sell for 90 shipped

-10 AN aeroquip hose, 28" long with a 90 degree fitting and a straight, aeroquip ends, and aeroquip fire sleeve (10 dollars a foot)- 50 OBO

2 -6an aeroquip hoses, 12" long, with straight aeroquip ends, i have 2 of these for my fuel setup - 50 for both
2 -6an aeroquip hoses, 18" long, straight aeroquip ends, also got these for my fuel setup- 50 for both

project silvia top feed fuel rail, brand new never used, 60 shipped

AEM UEGO 6 in one wideband O2 sensor, used for about a month comes with original box and everything but the bung- 230 shipped

2 pirelli pzero 275-35-19 tires, excellent tread, still have tire hairs, 40 a tire


zenki clear headlight lenses, made by my friend, pop off your old lenses, put these roughly where they were and just use some clear RTV (window molding stuff) to hold them where you want, duct tape is good to keep them in place till the RTV sets, easy mod and looks real good - 100 shipped per pair, i have 2

S14 (maybe s13 idk) nissan OEM coolant temp sensor brand new- the one pronged, one wire one, 20 shipped OBO

and only for a bit, i might sell this stuff too...

ACT heavy duty pressure plate with 6 puck unsprung clutch, entire kit with new TOB and pilot bushing and allignment tool.- 350 shipped OBO

Kai project 12.3 lb lightweight flywheel, never used- 190 shipped OBO




if you buy ANY of this stuff, and need any vacuum tees, electrical connectors, heat shrink tubin, or grade 8 hardware, let me know and i will throw it in the box for you.

would trade for
S14 MT no abs 1 piece driveshaft
any JDM S14 Zenki aero pieces
t4 KA turbo manifold
e-fans


EDIT:
i just looked and i got the tires confused with the 17s i have.

the 18s i have are Michelin Pilot Sport a/s, 235-40-18 sorry, not 245-40-18
the tread looks pretty decent though

deuceforty
04-15-2008, 08:15 PM
bump, oil pan, uego, fog lights MIGHT be sold

tires also pending

BUMP, ANY OFFER IS ACCEPTABLE I NEED THIS STUFF GONE ASAP im poor :(

deuceforty
04-16-2008, 06:35 PM
michelin tires sold
wideband/foglights pending
oil pan pending

Slow Poke
04-16-2008, 07:18 PM
I will trade you timers if you cover shipping. Your's MUST BE REAL and not a knock off! Pics would be needed...

Also interested in the fogs if there still available, soot me some pics of those as well.

Thanks

99maxgtr
04-16-2008, 07:27 PM
pics of the headlight covers please.

deuceforty
04-16-2008, 08:39 PM
I will trade you timers if you cover shipping. Your's MUST BE REAL and not a knock off! Pics would be needed...

Also interested in the fogs if there still available, soot me some pics of those as well.

Thanks

some guy is supposed to be picking up the fogs and the wideband tommorow, if not they are yours. which timer do you have?

pics of the lenses
http://i29.tinypic.com/34gwklk.jpg
http://i32.tinypic.com/2nndja.jpg
just to be sure you know what your getting, alot of people have misconceptions about these.. the edges are pretty rough (read isnt the greatest at paying attention to detail) and they do not slide into the old headlight housings. the edges really dont matter at all, since its all covered up and none of it can be seen.

you place them over, and use clear rtv to hold them where you want them..
when you take the old lenses out, there is a slit where the old lenses used to sit, alot of people think the new headlights go in those slits, and try and shove them in (they dont fit in there, btw) and end up breaking the lenses or saying that they dont fit. its impossible/really hard to make an acrylic lense that tapers in like the stock lights do, so what we decided to do is just have the lights sit on top of that slit, RTV the slit area, put the lenses on the rtv, then rtv around to make a good seal


and about the turbo timer, mine is real, here is a pic
http://i26.tinypic.com/3495mcz.jpg
ill get a better pic when its not dark out :(

Sir
04-16-2008, 08:44 PM
2 pirelli pzero 275-35-19 tires, excellent tread, still have tire hairs, 40 a tire
pics?

deuceforty
04-16-2008, 09:14 PM
2 pirelli pzero 275-35-19 tires, excellent tread, still have tire hairs, 40 a tire
pics?

http://i31.tinypic.com/2dllq3k.jpg

i can get better pics tommorow if you want

deuceforty
04-17-2008, 10:31 PM
AEM UEGO sold
Foglights sold
Oil pan sold
1 pair of clear lenses sold


everything is OBO, i neeeeeed to get something

miravete
04-17-2008, 11:31 PM
its a long shot, but would you happen to have a ka24de downpipe for an s14? thanks.

deuceforty
04-18-2008, 06:42 AM
its a long shot, but would you happen to have a ka24de downpipe for an s14? thanks.
i think my parents threw it away man :(

RUTH'LESSDET
04-18-2008, 07:43 AM
Pioneer 760watt amp, REAL good... will actually push the 760 watts- 150 shipped OBO

have a MA-MS high pressure power steering line, earls fittings (deletes all the rubber lines from the pump to the rack) never used, retails for 150, will sell for 90 shipped

-10 AN aeroquip hose, 28" long with a 90 degree fitting and a straight, aeroquip ends, and aeroquip fire sleeve (10 dollars a foot)- 50 OBO

2 -6an aeroquip hoses, 12" long, with straight aeroquip ends, i have 2 of these for my fuel setup - 50 for both
2 -6an aeroquip hoses, 18" long, straight aeroquip ends, also got these for my fuel setup- 50 for both



pics of these items please and how much channel amp??

rbpowered_240
04-18-2008, 07:55 AM
could you send me a pic of the edges of the lenses so I can decide if I want to get one set from you this weekend. [email protected]

deuceforty
04-18-2008, 01:58 PM
pics of these items please and how much channel amp??

sure man, as just to let you know, the PS hose was sold a few hours ago.

here are the lines, they arent SS braided, but i used them on my drift car, which i was using performance > appearance (hence the fire shield on the line that goes by the manifold :) )

http://i31.tinypic.com/2v0l4qo.jpg
once again, OBO is key word here...

these are the subs and amp in the car
http://i26.tinypic.com/14m6esw.jpg
http://i29.tinypic.com/11kvclv.jpg

amp is a true 760

deuceforty
04-18-2008, 01:59 PM
could you send me a pic of the edges of the lenses so I can decide if I want to get one set from you this weekend. [email protected]

what do you mean the edges? you mean like on the inside?

rbpowered_240
04-18-2008, 02:25 PM
yeah I am refering to the edges on the inside since you said they are a little rough is all.

deuceforty
04-18-2008, 04:20 PM
yeah I am refering to the edges on the inside since you said they are a little rough is all.

edges meaning the bottom part that goes onto the housing

rbpowered_240
04-19-2008, 05:59 AM
Yes those are the edges I am refering to the ones that go onto the housing itself.

deuceforty
04-20-2008, 11:04 PM
knock sensor sold

here are pics of edges, and pics of tire tread on the pirellis

http://i31.tinypic.com/29qie5k.jpg
http://i28.tinypic.com/fw6kco.jpg

deuceforty
04-21-2008, 11:45 AM
bump for student loans that need to be paid :(

deuceforty
04-23-2008, 08:01 PM
bump bump bump

Phlip
04-24-2008, 07:21 AM
Limit on bumps is 2, total
bump, oil pan, uego, fog lights MIGHT be sold

tires also pending

BUMP, ANY OFFER IS ACCEPTABLE I NEED THIS STUFF GONE ASAP im poor :(

michelin tires sold
wideband/foglights pending
oil pan pending

AEM UEGO sold
Foglights sold
Oil pan sold
1 pair of clear lenses sold


everything is OBO, i neeeeeed to get something

bump for student loans that need to be paid :(

bump bump bump

#/f/showthread.php?t=21037