Sheet metal intake manifold for sale

[tony240]

Im goona try this again.......i have a hand made intake manifold for sale or trade for some nice wheels asking around $900

[rican_nick]

waht is it made for?? those runners are long are there any clearance problems?

GLWS

[INeedNewTires]

you probably didnt sell it the first time because of lack of information.... just like this time!

Its pretty important on an item like this to list what motor it goes to.... and then other basic stuff like if it has velocity stacks, injector sizing, throttle size and bolt pattern, etc.....

For all we know this goes to your boyz honda in chi-town....

[tony240]

sorry for lack of info,threw the thread up before I ran off to work this morning

I made this intake for myS 13 motor.......it has a Q45 throttle body flange....integrated velocity stacks......1/8th inch thick aircraft grade aluminum that is double seam welded.....not an ebay junk manifold....I build performance parts like this for several well-known shops......the reason I am selling is because I am going KA-T and have no need for it anymore.....this is not an advertisement for further sales there is only one of these in existence.....I have personally spent over 30 hours buidling this manifold it was calculated out to make power.....for any questions please PM me

[yarou]

sorry for lack of info,threw the thread up before I ran off to work this morning

I made this intake for myS 13 motor.......it has a Q45 throttle body flange....integrated velocity stacks......1/8th inch thick aircraft grade aluminum that is double seam welded.....not an ebay junk manifold....I build performance parts like this for several well-known shops......the reason I am selling is because I am going KA-T and have no need for it anymore.....this is not an advertisement for further sales there is only one of these in existence.....I have personally spent over 30 hours buidling this manifold it was calculated out to make power.....for any questions please PM me

we still don't know what motor you're talking about, s13 motor is a bit broad, and why wouldn't you use this for ka-t? (assuming its for KA)

[babowc]

hows hood clearance?
any fitment in car?

btw.. you might want to post all that info in your first post and some detailed pics would help.
it IS a $900 item...

[tony240]

sorry but if you actually know what youre looking at it is an s13 sr20 intake mani, and yes it fits under the hood why would I have made it so nice if it doesnt fit ok......it fits very nicely in an s13 or s14 engine bay.......I have one question.......why are most people haters on this forum? I've put alot of time and effort into this piece and all you guys are hating......I specifically posted that if you have questions PM me.....whats the deal?

[burnsauto]

sorry but if you actually know what youre looking at it is an s13 sr20 intake mani, and yes it fits under the hood why would I have made it so nice if it doesnt fit ok......it fits very nicely in an s13 or s14 engine bay.......I have one question.......why are most people haters on this forum? I've put alot of time and effort into this piece and all you guys are hating......I specifically posted that if you have questions PM me.....whats the deal?

Well its just basic selling skills. The more info you provide upfront, the better chances you have of selling whatever it is your offering. Others and myself know its an S13 SR manifold, but others who haven't studied the stock intake, wouldn't really know the difference.

Its a great looking manifold btw. I'm guessing you need to relocate the fuse box? any throttle cable modifications you need to do? Have any pictures of it installed, or did you decide to go another route before you ever got a chance to sell it?

[jskateborders]

IF you put alot of time and effort into this piece then put a little bit of time and effort into this thread

[babowc]

noone is hating.
we're just asking you to put the specifics of the manifold in the thread.
just trying to help.

[vodka2]

people hate.. because most cats on here are broke.. think they are gangsters... and like to window shop .. good luck with your sale man .. Nice piece.

[tony240]

http://i299.photobucket.com/albums/mm310/tony240_2008/car%20stuff/carstuff006.jpg

http://i299.photobucket.com/albums/mm310/tony240_2008/car%20stuff/carstuff010.jpg


http://i299.photobucket.com/albums/mm310/tony240_2008/car%20stuff/carstuff008.jpg

[luisgonz]

sorry but if you actually know what youre looking at it is an s13 sr20 intake mani, and yes it fits under the hood why would I have made it so nice if it doesnt fit ok......it fits very nicely in an s13 or s14 engine bay.......I have one question.......why are most people haters on this forum? I've put alot of time and effort into this piece and all you guys are hating......I specifically posted that if you have questions PM me.....whats the deal?

They or we dont hate, Its just if you had more Photo's of the item maybe we would see what flange is on there and would not ask more q's berfore we post. I can say I do window shop but not alot, And you say you made it. Is it possiable if you can make some IACV flange. I need one because I too I'm making a manifold. Good luck on with the Sale.

[tony240]

its a possibility

[IIIXziuR]

Excellent craftsmanship man.
I think everyone was just trying to get more details out of you to better promote your item, just in a tough love kind of way.

Looks cool man. I assume this only would fit an S13 SR intake side?

[tony240]

havent really had a chance to test with other sr20 cylinder heads

[logik23]

It's like saying "stuff for sale, it's shiny, 1200$, PM me for info".

Your not going to sell it like that.

Not one is hating, you just have no salesmenship whatsoever.

When people ask questions about the item, treating them like they are idiots is not a key selling point.

Anyways, nice piece, good luck.

[ESone3]

Teach Me To Weld Like That!

[[email protected]]

do u have any pics of it mocked up on the motor. I have A 510 with a sr. how far does it sit past the stock one. Clearence would be the biggest issue for me.
Very nice, love to have it on my car it it fits?

[tony240]

I should be able to post a mocked up shot within a day or two

[s13Dr1ft]

Have you dynoed with this intake on? +/- numbers?

[tony240]

I might be able to next week I'll ask my friend at Sound Performance if we can test it

[[email protected]]

Thanks. Tony!

[jrocslider]

It's like saying "stuff for sale, it's shiny, 1200$, PM me for info".

Your not going to sell it like that.

Not one is hating, you just have no salesmenship whatsoever.

When people ask questions about the item, treating them like they are idiots is not a key selling point.

Anyways, nice piece, good luck.


shut up already.

same shit was already posted my like 5 other members.

i think he got the point by now.


great looking piece btw.

[Marcus]

shut up already.

same shit was already posted my like 5 other members.

i think he got the point by now.


great looking piece btw.

dude, you never know. some ppl never get anything.

[jonnybonds84]

That's a pimp mani. GLWS

[tony240]

thanx for the bump