Suspension Techniques Sway Bar Shims

[shinhed]

I have a set suspension techniques sway bars for the s13 and I don't remember where the large bushing bracket washers go. I'm not talking about the endlinks, I'm talking about where you mount the bars to the chassis. Anyone else installed these?

[sldbyuramg]

where the old ones were...there should be holes for it to screw into...if you cant find them then i have no idea what to say to you...

[shinhed]

where the old ones were...there should be holes for it to screw into...if you cant find them then i have no idea what to say to you...

:ugh:
Seriously?

I know that, but the bars came with washers to put under the brackets. I wanna know where to put them and how many.

[MangoDorifto]

Installed these sways on my S14 and the washers went between the front sway bar bushing bracket and subframe. Mounted the front of the bracket flush with the subframe and rear had a gap where it's not flush. Was supplied 8 washers, I used 4 on each side and it was completely flush to put the bolt through. Hope that helps.

[shinhed]

Much thanks.