insanitykouki
04-06-2008, 05:27 PM
Hello everyone, nice to meet you all! My name is Griffin and I have a 1998 Nissan 240SX SE. My mod list is fairly extensive from rims to cams and lightweight drivetrain goodies to suspension arms.
I decided to KA-T for a few reasons but mostly because I didnt want to do what everyone else is doing :). I installed the full turbo kit this winter and my power goals are mild with approximately 300-350whp.
I do have a question though, I figured I would ask while introducing myself along with pictures :). The car wont rev over 3000rpm. From what I have gathered is this is generally a MAF problem. I swapped MAFs (Z32) and cleaned both MAFs. Additionally, I checked the wiring multiple times and everything is fine. I have an EFI ecu and I am almost CERTAIN the program is wrong and needs to be reflashed. Everything else is plugged in perfect. I did not remove the motor or anything, just took off intake and exhaust replaced it all respectively. Thoughts?
List of mods, not complete because I have a terrible memory!
Go fast mods
JWT Cams
T3/T4 50trim 63a/r turbo, JGS intercooler piping, Perrin BOV
X02 racing intercooler (Ebay lol)
exhaust
JGS downpipe and trust downpipe, megan test pipe, blitz "cat"back
fuel
550cc deutchwerk injectors, walbro fuel pump
tranny
fidanza flywheel, ACT clutch, enjukuracing driveshaft, kaaz LSD, unorthodox racing underdrive pulley, B&M short shifter
looks
350z powdercoated bronze rims with falken azenis
suspension
tein tie rods, gr2 shocks, tein s-tech springs, battle version RUCAs
electrical
EFI ECU, z32 maf, relocated battery, AEM tru-boost, alpine 6.5 rear and front, alpine deck, 2 12" orion subs, 1500w amp, apexi S-AFC II (letting a friend use for now unless i cant get my ECU crap to work)
I would post more pictures but it looks like a standard black kouki with the bronze 350 rims. Heres the motor, i guess its the only thing that is visually different
http://a145.ac-images.myspacecdn.com/images01/128/l_612147ed3a342edd571df748e78007e8.jpg
http://a666.ac-images.myspacecdn.com/images01/31/l_65b759922f9b16d40304da4765c824a9.jpg
I decided to KA-T for a few reasons but mostly because I didnt want to do what everyone else is doing :). I installed the full turbo kit this winter and my power goals are mild with approximately 300-350whp.
I do have a question though, I figured I would ask while introducing myself along with pictures :). The car wont rev over 3000rpm. From what I have gathered is this is generally a MAF problem. I swapped MAFs (Z32) and cleaned both MAFs. Additionally, I checked the wiring multiple times and everything is fine. I have an EFI ecu and I am almost CERTAIN the program is wrong and needs to be reflashed. Everything else is plugged in perfect. I did not remove the motor or anything, just took off intake and exhaust replaced it all respectively. Thoughts?
List of mods, not complete because I have a terrible memory!
Go fast mods
JWT Cams
T3/T4 50trim 63a/r turbo, JGS intercooler piping, Perrin BOV
X02 racing intercooler (Ebay lol)
exhaust
JGS downpipe and trust downpipe, megan test pipe, blitz "cat"back
fuel
550cc deutchwerk injectors, walbro fuel pump
tranny
fidanza flywheel, ACT clutch, enjukuracing driveshaft, kaaz LSD, unorthodox racing underdrive pulley, B&M short shifter
looks
350z powdercoated bronze rims with falken azenis
suspension
tein tie rods, gr2 shocks, tein s-tech springs, battle version RUCAs
electrical
EFI ECU, z32 maf, relocated battery, AEM tru-boost, alpine 6.5 rear and front, alpine deck, 2 12" orion subs, 1500w amp, apexi S-AFC II (letting a friend use for now unless i cant get my ECU crap to work)
I would post more pictures but it looks like a standard black kouki with the bronze 350 rims. Heres the motor, i guess its the only thing that is visually different
http://a145.ac-images.myspacecdn.com/images01/128/l_612147ed3a342edd571df748e78007e8.jpg
http://a666.ac-images.myspacecdn.com/images01/31/l_65b759922f9b16d40304da4765c824a9.jpg