New PWR 10 Row Oil Cooler.

[johngriff]

Sold in two hours!

Oh yeah, pickup is fine, it is located in Long Beach, CA

I had this made for my race car, but I don't need it at the moment. It is a PWR 10 row aluminum oil cooler with -10 fittings.

I usually sell these for about $140 on sale, but I am willing to take a loss because I'd like to do something nice for the wifey.

So... $90 sounds good.

You can find a link to it here on my site.

http://www.rpsport.net/product/RPS-PWROIL10ROW/PWR_Aluminum_10_Row_Oil_Cooler.html

I'll have my little brother snap some pics of it in a min and put them on here.

Paypal gladly accepted!

Thanks!

John
562.489.5016

[blu808]

http://cj_whitehound.madasafish.com/Rats_Nest/artwork/clipart/winged_rat.gif

That is just what I need. Too bad Im broke at the moment.

GLWMFS

[brndck]

bump with a question. would a thermostat be necessary or wise to use with this? i already have a greddy relocation kit, but would maybe like to have an oil cooler also...

[LB.Motoring]

Do they make larger ones?


I need to make one for a porsche soon, Bump for a legit seller!

[johngriff]

Yes, robby just hit me up, I can have them custom made in any config you like.

Thermostat - its debate-able. I personally was not going to use one. If you don't it, you will just need to let the car warm up first thing in the morning. (idle for maybe a min or so) Other wise it should be fine.

I also have an earls Aluminum Hardline kit, 25 feet of raw line, and a box of -10 buildable hard line fittings (i think 10). You will need a line bending tool and a end flaring tool to put it all together. I will kick that in for another $60 (paid about $130).

[vanilla gorilla]

can you give me the dimensions of this? thanks.

[johngriff]

Yeah sure, it is pretty small, I am having my brother take some measurements off it right now.

--John

[adrians_s13]

bosozuko time?

haha jk

glws John

[johngriff]

hahah maybe ya??! This one is pretty form factor.

Because it uses pwrs louvured fin technology you only need half the surface area of a copper oil cooler to get the same effect. So it ends up being pretty small, if you run it boso style people might not even see it!

It is 11x7.5x1.5 inch.

http://i32.photobucket.com/albums/d2/vonendorphin/pwr1.jpg

Link to pwr's info site on their line up of oil coolers:

http://www.pwr-performance.com/cooler.htm

[Mister.E]

does it come with any mounting brackets or anything like that? also, would you be willing to ship it via USPS priority, i am located at an APO address. how much would it be shipped (96319)?

[johngriff]

No, if you want mounting brackets on it, there are one of two ways.

Either specify when you order a new one from me to have pwr weld them on (new).

Or have brackets tig welded by an experienced aluminum welder (ie aircraft mechanic on base), if you are going to buy this one. Shipping is $20 via usps priority.

[johngriff]

Sold! Very very fast!

Thanks everyone!

John