View Full Version : question about KA24E TO KA24DE SWAP
YES ive done searching and havnt found anothing im looking for.
im swaping in a early 95 de into my 89' s13.
i got everything i needed to get but i havnt read anything about the trannys.
everything DOHC im getting is from a 93' and the 93 tranny and the 95 tranny are different, talking about sensors and plugs, i got the 93 tranny harness but doesnt plug in the 95 tranny??
what have you guys done?
why hasnt anny1 had this problem? what am i doing wrong?
if u could help me ill appriciate it thank you!
Z U L8R
04-06-2008, 12:38 AM
you need to use your sohc lower harness, there's no difference in the transmissions externally. s14 trannies just have a little better oiling inside them. neither one is a make or brake it, they both will do the job just fine. you need to use your sohc speed sensor, or just use the plug. it's only 2 wires for the speed sensor
you may want to get s13 dohc power steering lines, or you'll just have to bend urs a little.
rewire your dash plug, all the important wire colors match up. use your sohc dash plug. get a s13 dohc guage cluster and your tach will read.
good luck
Dave =]
lol like 10 thread down sum 1 asked the same ?'s read it
http://www.zilvia.net/f/showthread.php?t=180117
click on links
you need to use your sohc lower harness, there's no difference in the transmissions externally. s14 trannies just have a little better oiling inside them. neither one is a make or brake it, they both will do the job just fine. you need to use your sohc speed sensor, or just use the plug. it's only 2 wires for the speed sensor
you may want to get s13 dohc power steering lines, or you'll just have to bend urs a little.
rewire your dash plug, all the important wire colors match up. use your sohc dash plug. get a s13 dohc guage cluster and your tach will read.
good luck
Dave =]
but u didnt read, i have nothing in my 89' that is sohc except for the a/c lines,ps lines etc... i have 93'chassie, engine, underdash,ecu,tranny HARNESS..
the 93' tranny harness does NOT plug in the 95 due to different sensors i guess, get it?
lol like 10 thread down sum 1 asked the same ?'s read it
http://www.zilvia.net/f/showthread.php?t=180117
click on links
yes dude ive read and read, doesnt show anything answering my question..
but... which one is the body harness? (chassie or interior?)
CynCityS13
04-06-2008, 10:43 AM
I did the same swap n i just kept the same sohc tranny..
It seems to me all u need is 95 bottom wire harness..
n take off the power steering u dont need it.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.