S13 "TRUNKBRACE" Coupe and Hatch

[5150Fab]

Direct bolt-in! All Hardware is included. T.I.G. Welded. I designed the brace to let you access your spear tire and fuel pump. You can PM or Call me at 401-369-5941 if your interested. They are gunna for $149 SHIPPED.

Im gunna try and have a test brace out for any of you guys that might be interested in trying it out. Its a win win, you get to try out the brace and I get a input on it. If you see me out there come over and ill let you try er' out.

Dont mind the hardware in the pics it was just temp. for moch up and pics.

Thanks, Tony

http://i301.photobucket.com/albums/nn45/5150Fab/CIMG0293.jpg
http://i301.photobucket.com/albums/nn45/5150Fab/CIMG0291.jpghttp://i301.photobucket.com/albums/nn45/5150Fab/CIMG0282.jpghttp://i301.photobucket.com/albums/nn45/5150Fab/CIMG0289.jpg

[Thursday]

looks like a really nice peice man.

[DreamN]

Looks really nice, I'm just not liking the price. Call me cheap or whatever, but I figure it could be done for less.

[racepar1]

You should have made it one solid piece instead of bolting to the mounting plates.

[5150Fab]

yea, but by making mount to the plates you can load pressure on the strut towers.(one rod end is LHT and one is RHT)

I could probably build it one piece if you wanted...It would be cheaper honestly.

YOUR CHEAP! HAHA its cost me a lot to build these braces, up to about $6000 between all the tools and supplies. But....if your interested pm me and we can talk $$$$$$.

[bejota180sx]

i like it, but like above the price is kinda high... but if the quality is going to be good then i can give in to the price...

wish i could see it mounted on a hatch or try it out or sumthing...

anymore info you can give me pm me im interested...
thanx

[5150Fab]

PRICE UPDATE

149 Shipped

I can do that for my zilvia buds

[zugoi]

That price isnt too bad but your also giving it too all craigslist viewers (which is where i found this link). I want a real ZILVIA player price!!! Then please PM me.

[njd07]

good luck selling them here without a vendor account...my guess your thread will be locked anytime now.

[sillyvia13]

nice bar...will add a lot of support
good stuff nice price too!

[5150Fab]

Here are some pics of it in a hatch, sorry about my dirty shell. http://i301.photobucket.com/albums/nn45/5150Fab/CIMG0264.jpghttp://i301.photobucket.com/albums/nn45/5150Fab/CIMG0268.jpg
http://i301.photobucket.com/albums/nn45/5150Fab/CIMG0271.jpg

[urmyhero4now]

ohh that looks fresh. this is a player price on a nice piece of craftmanship. good job bro.

on a side note...people need to stop being so cheap. to ship this damn thing is probably gonna cost a grip anyways cuz of its size. so yes. the guy is probably make some money. but everyone has to get his.:bigok:

[5150Fab]

ohh that looks fresh. this is a player price on a nice piece of craftmanship. good job bro.

on a side note...people need to stop being so cheap. to ship this damn thing is probably gonna cost a grip anyways cuz of its size. so yes. the guy is probably make some money. but everyone has to get his.:bigok:

Thanks man, atleast there are some ppl out there that appriciate a quality service.

[EDacIouSX]

i think the only thing you might want to look into is making the welds to the strut plate a little bit bigger. but, that also depends on how big the strut plates are cause you don't want those plates to flex or anything under load. but as it is right now, looks pretty darn good and as for making the plates and bar one piece i think that is a bad idea because every car is different and the chasis might be stressed in different locations resulting in a bar that will only fit some s13s and not others. good job though

[5150Fab]

plates are made of 3/16, i bevel the edge so that it gets a ton of penetration. They have no flex at all. If anyone wants it to be one piece than i can make the holes for the rear struts bigger so that it will have play to fit any car. Thats absolutely right, each car is a little bit different, but i keep that in mind in the engineering process haha. Thank you :bigok:

[5150Fab]

bump please?

[Kaneda774]

I'll bump it for you, pm sent

[Okinawandrifter87]

Before you get locked out Tony, friend to friend advice theres only two bumps per thread and you do wanna look at a vendor license soon. However to all the people reading this the brace actually does make a good difference and ive felt it in a coupe. Rides great and def stiffens up the rear end!

[5150Fab]

i have no idea where or how to get a vender licence, and if you could PM me with that kind of info.

[DreamN]

it's in your user cp. same place where you get the premium membership. just look for the vendor ones.

[Kaneda774]

Hey guys, bought this brace from 5150fab, very nicely made, and a great fit too! Shipping was quick, hope to see him come out with a matching front brace.
A+,

[slider2828]

I think a better option would be something from Next called Miracle Cross Bars.....

[5150Fab]

I think a better option would be something from Next called Miracle Cross Bars.....

thats funny that you say that, check out my other product and tell me that its a better option, it would be if i had a honda civc hatch that really needs the bracing in the c pillars. and i do actually make a brace that is identical. :mrmeph:

[projectb13]

thats cheap , one for my sentra runs at $210.

[adrians_s13]

looks clean. I think the one from Young and Artless was about that same price as well.

[Slo_Slidewayz]

Where in Sac are you located? I may be interested in meeting up with you and checking it out.

Any discount for local pick up over having it shipped?

[socal_kouki]

Real nice work. You should be proud of your craft, bro. GLWS's. +1

[5150Fab]

thanks a lot guys, i really apreciate the comments. i take a lot of pride in my work, and its a great feeling when someone emails me back about the brace they bought from me and how much they love it. its almost worth that alone, the money is just a plus. thanks again and i appriciate all the buisness.

[sillyvia13]

bump, i am about to order minessssssssss.
Sweeeeetness.

[Dee]

nice, might be ordering one soon that's not a bad price considering all the work put into it...looks quality.

[sillyvia13]

yea the guys a cool duder too, might as well help a good dude out and get a pretty sweet part... I am gonna paint mine al crazy with mean flake! yeaaaaaa

[300zx1990tt]

good price on this

[S14DB]

Absolutely NO Commercial Sales.