Bolt on S13 air ride! (or s14 for a little more)

[yokotas13]

Basically, this is a BOLT ON air ride kit
Include:
Coilovers (CST)
Airbags (aerosport by UNiversal Air Japan)
Compressor
valves (to controll each axle individually)
two air tanks
3 ft stainless steel leader hose with new one way check valve
Switch box (old school 10 switch style, can wire up small on-off-on toggles to make it cleaner)
and air line (you MAY need more, but if it was enough for my cedric, it should be enough for your 240)

basically, all you need to do to install is this:
Put YOUR tophats on(mine are y33 specific)
power line from battery
IGN source wire for compressor pressure switch
and run your air lines

instructions will be supplied for a painless install that can be done in around a day or less.

anwyays, here are a few pictures from when i was installing it
Ride is SUPER stiff on above 90PSI (top is 130psi)
stiffer than the coilovers were with the 8k/6k springs
this setup IS CAPABLE OF DRIFTING ON. its not sloppy, its liek an infinately adjsutable spring rate in a sense. if its too soft, add a few PSI, and it stiffens up.
if you have questions please ask!

http://farm3.static.flickr.com/2016/2077928148_1c1469c255.jpg
http://farm3.static.flickr.com/2261/2077138243_90efd6bf66.jpg
http://farm3.static.flickr.com/2361/2080385202_a74d93b077.jpg
http://farm3.static.flickr.com/2361/2080385202_a74d93b077.jpg
http://farm3.static.flickr.com/2077/2080385354_cc49ad6a29.jpg
http://farm3.static.flickr.com/2143/2080385414_18bfc1878e.jpg
http://farm3.static.flickr.com/2197/2079600061_39f2b34855.jpg
http://farm3.static.flickr.com/2157/2080385536_8edd74eadb.jpg
http://farm3.static.flickr.com/2205/2057475182_2715a69335.jpg
(shows only one tank and the old leader hose)

2600 shipped anywhere in the US

[Jgrand03]

bump for the setup i want! trade me for my coils grant!

[yokotas13]

you coils wont work on my stagea, and i know hwat you paid :)

[Jgrand03]

good point but that was before springs camber plates and ish :p anyways bump for a good guy

[i need tires]

air bags probably one of the BEST suspenion setups you can have!

+1 for yet another amazing product from the man in japan

[yokotas13]

n only air bags

but air bags on adjustable damper coilovers :)

[yokotas13]

s14 is only 500 more, and includes BRAND NEW coilovers

[LongGrain]

this is sick, but i have a question. you said above 90psi they will be super stiff, but if you inflate them that much, wont you be sitting 4x4 style? or am i missing something, just curious.

bump for some sweet ish.

[yokotas13]

put it this way
all down
http://farm3.static.flickr.com/2193/2094616259_3d8a0f9ff4.jpg
all up (140 psi)
http://farm3.static.flickr.com/2221/2079603971_ca8347c03e.jpg

ride height at 90 psi
http://farm3.static.flickr.com/2352/2178351771_2e0cfe244d_b.jpg

ride height at 60psi (still stiff)
http://farm3.static.flickr.com/2199/2238056171_b48249288f_b.jpg

coupled with coilovers, it WILL be as stiff as the coilover was, and with higher psi, stiffer.

[Naim]

If that's not baller, I don't know what is.

GLWS!!!

[Teddy]

Damn I want it so bad but don't have the funds. Bump for a sick set up.

[yokotas13]

thanks guys, i appreciate it

you CAN Drift on this setup, i have done it multiple times in my cedric. its perfectly capable

[goldee240]

GDAM these are sexy haha bump for being too cool

[yokotas13]

i cant believe noone wants this stuff!

[vodka2]

people want it .. but it is expensive .. bump .. pm sent.

[yokotas13]

expernsive is relative

price it out individually, then labour to assemble everything (if you dont want to do it

this is a drop in ready to go setup

[GSXRJJordan]

+1 for a great idea for our cars. I looked into doing it as a custom, one-off conversion using mini-truck stuff, and didn't feel like tearing apart my Tanabe Sevens to try. Would be a great upgrade for someone with stock suspension, nice wheels, wanting flexibility.

Do the CSTs have adjustable preload separate from ride height? Meaning an upper set of "spring holders" in addition to the bottom set? It doesn'lt look like it in a couple of the pics, but it does on another. Because then you could set your ride height to whatever you want, and use the bag for a 3" adjustment from 'on the ground' to 'driving', or 'low driving' to 'clear curbs'...

[yokotas13]

yeah,
its a full dual adjustable shock with damper adjustability as well
just like stance, tanabae, hks, etc etc

[GSXRJJordan]

That's awesome! The best of both worlds: air ride to let your car sit on the ground, Zilvia-approved, and be able to actually clear shit if you want/need to. Thanks for bringin the heat Grant ~

[sr20det drift]

WOW that is baller glws

[yokotas13]

That's awesome! The best of both worlds: air ride to let your car sit on the ground, Zilvia-approved, and be able to actually clear shit if you want/need to. Thanks for bringin the heat Grant ~
and dont forget, you can drift with it

[Ian]

how much w/o the shocks and stuff?

i want this for my wrx

[yokotas13]

2k shipped for the whole air ride setup minus shocks

[eastcoastS14]

damn if someone wanted to trade me for my sustec pro sevens/ TEAS id be all over this

lol someone buy my coilovers so i can buy this set up....sustec pro sevens that have seen like 5months of use if that

[jspec240]

Damn man anyone with this set up would be on ballin status. Nice set up Grant. Especially with the VIP style s13 kit.. with a nice set of wheels of course.. which Grant could hook that up too!

[yokotas13]

lol
you dont even need baller ass wheels

youd be baller anyways with this setup!

(but i can get you the wheels too lol)

[jspec240]

^^^^ I know thats what I said haha.. so it would be ballin baller status with wheels..:boink:

[jflor004]

who makes that air bag...

[yokotas13]

a company here in japan

[mangoes]

omg thats so awesome! how long will these be available for?

[yokotas13]

until they are sold....

[yokotas13]

1600 shipped bags only, no coils if you pay by saturday!
or evena deposit

[SC_S13]

^ freaking steal. ya'll can ALWAYS count on Grant to bring the hotness.

[yokotas13]

i do my best!

[thatdrifterguy]

i have some questions.

so it'll be as stiff as it was with the springs at a certain psi. and then if i wanted it to be stiffer, i could raise the psi but it'll also raise the car right?
(and i can also just adjust the damper to make it stiffer too)

and how much height adjustability is there between 0psi and 140???

sorry, all these adjusting is making me think alot

[sylsevilsis]

i have some questions.

so it'll be as stiff as it was with the springs at a certain psi. and then if i wanted it to be stiffer, i could raise the psi but it'll also raise the car right?
(and i can also just adjust the damper to make it stiffer too)

and how much height adjustability is there between 0psi and 140???

sorry, all these adjusting is making me think alot

If you get this, it would be perfect to get around that Height requirement on Guam.:wiggle:

[DOOK]

come on guys, it isn't that hard... you can use the locking collars for rude height adjustment, and the airbags for fine height adjustment, control ride height.... just think of this setup as in it has springs that can lengthen or shorten at the touch of a switch. Your height adjustment perch doesn't move unless you manually move it. What i would do is figure out what PSI I like the ride at, set it at that PSI and then adjust the collars to the height I wanted at that PSI, and then take it from there.

[datsunrdster]

Hey boss, can you make a set-up for a 99 BMW 740iL? if you can how much for the entire set-up?

Thanks
Mike
Please quote me shipping and all to San Diego 92126.

[yokotas13]

not sure, you can ADAPT it for your car
it just slips over struts

[yokotas13]

lotsa PMs, noone has sent the money yet

[shmiddy]

Sick Ass Shit Man +1

[ReLevent1]

damn it, i would hella get this for my vert.....I hate being broke.

[loveskylines]

MINE! =)....IM EXCITED! :2f2f: :rawk::faint:

[SUPERSTAR]

Do you sell the kit minus the coilovers? I have Greddy set up on my s13.

[RG]

any vids of it in action?? i've been looking for something like this for a while

[SUPERSTAR]

Any warranty on this product, Im not looking for lifetime or anything. Just wanna make sure they work after install with out issues?

If so, I wanna order these for my pinky.:mepoke:

[GeneStarWindGSW]

Alright i have a question.

How much is this without coilovers?

will these work with coilovers that have dampeners?

last one... will this setup work with my Sustec Pro SEVEN coilovers with the TEAS (electronic dampening)?

[Team DET]

dumb question are these good for drag racing:2f2f: