PDA

View Full Version : Work Meister S1s 5x114 18x9-2ish 18x10-2 (one wheel is SMASHED)


drifts135
03-31-2008, 01:32 AM
Let me first appologize to anyone I may have flaked on recently while in an attempt to buy or trade wheels....This smashed wheel is the reason I dissapeared. I am back from the shock and have to unload the losses....

The wheels are a "rare" carbon face that supposedly was only made for some companie's show cars or some poo.... story given to me by a couple of guys, could be total bunk. I do KNOW this is the original coating and not some afterthought.

Fronts are 18x9 and I am pretty sure they are -2 (will look when I remove them from the car.

Rears are known to be 18x10-2

All of the wheels have a few little coating chips on the face (sharpie should get em back up to snuff. One front rim has a 2" or so light curb mark and a SMALL ding (1/4" deep or so)..... The BIG problem is that one rear is SMASHED. The damage covers 1/4 of the wheels lip. It is extremely deep and looks horrible. This may sound crazy but it does LOOK worse than it is. It kinda turned inside out (sad huh?) and it seems like it will sorta "flip" back when pressed out by someone who knows their stuff....eh, maybe I'm retarded. I do know that a local wheel shop said it could be fixxed "for a lot" but that it would never be very strong again. (I can beleive that). I need wheels I can TRACK the shit out of and I dont think it would be smart to do that with this one if it was repaired....

I would like $850 plus shipping for the two fronts or $1200 plus shipping for all four.

Please limit the "holy poop thoats a messed up wheel" comments. I am fully aware... I have to see it every day and I am ready to break the curse these things have seemed to have since I sold the red coupe....


Orrrrrrrrr...... If someone can repair the crushed 10" for under $500 including shipping out and back, I will do that and KEEP EM. If it bends then oh well.

Link to ZT thread. Pics are on the red coupe and on the black S14...duh. If you see an S1 in a pic in that link...its one of em.

http://www.ziptied.com/forums/index.php?topic=13818.0

...and here is a pic of my nightmare...
http://i9.photobucket.com/albums/a58/avus323is/KielyWheel2.jpg

PM me if you have a day or two.. If you want to actually reach me quick, call me at 803-320-0547 (Kyle).

don henley
03-31-2008, 01:36 AM
Not a bad price for the set! wish they weren't negative offsets..

drifts135
03-31-2008, 01:42 AM
Wat!???.......

ESone3
03-31-2008, 07:32 AM
try these places

Keystone Automotive
3333 W. 47th Place
Chicago IL 60632-3041
773-927-9600

Transwheel Corporation
620 Morse Avenue
Elk Grove Village IL 60007-5102
847-290-8473
www.transwheel.com

i've seen them fix come crazy stuff... but not this crazy. Its worth a shot.

... and holy poop, that's a messed up wheel! :D

jspec240
03-31-2008, 12:29 PM
RB motoring can do anything.

Adam496
03-31-2008, 02:26 PM
Have any pictures to show the condition of the two fronts?

drifts135
03-31-2008, 03:44 PM
the pics you see in the ZT link show the fronts post damage but I'm not sure if it is visible in any of em. I will try and get pics of the fronts... One is fine and the other has just what I said, a small curb mark and a little ding. I drive on it every day and most people who see the car often dont even know it is there. It is a 3ft kinda thing.

PM me offers folks.Thanks for the places btw, Imma call em for price quotes and whatnot.


EDIT EDIT EDIT EDIT!!!!!!!!! This may be over already folks. TRADE PENDING!!! I will let yall know if it falls through.

bloodangels13
04-01-2008, 03:07 PM
i sent you a PM on LookOutdrift.....