lol car.

[McRussellPants]

lol zilvia build thread, whatever, I'm getting all excitable about it.

New:
GT3076R, 850ccs, BV Cage, PFC D-Jetro, Painless 8 Circuit, V-mount IC, Strut Tower Gussets, Legit Painted interior, Super Heat control engine bay. Tomei Oil Block + Earls 425 Cooler + Ect. AN Fest 9000, Run on Straight MS109.

Car will never see a track ever, "Track Car" build = instant never gets driven.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/ReadyforTurbo.jpg

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/111_1010.jpg

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Painless.jpg

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/111_0982.jpg


Old Setup.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/carz023.jpg


Special Thanks.

www.Boostlogic.com helping beyond belief for real.
www.SPLParts.com
www.Streetrays.com

[womenbeshoppin]

+rep........

[Enjin]

everything is nice and clean. props to you. I'm sending you a pm about the wiring... :D

[IIIXziuR]

Oh shit sounds like the update to the car will be bad ass.
Will you be doing the V Mount yourself?
Are you going to try to run a high pressure AN P/S set-up?

Sounds like serious business bro, I hope you keep us updated.

[ByeByeSti]

that right there is a pretty sexy blue. so much flakee, anyways keep us updated with pics!

[McRussellPants]

Will you be doing the V Mount yourself?

With the help of Boost Logic.

Are you going to try to run a high pressure AN P/S set-up?

Already done.

16x1.5 Non O Ring Steel Russell Fitting
14x.15 O Ring Steel Russell Fitting.
-6 Steel 90 degree x 2 Aeroquip
2ft Aeroquip HP hose.

about 60$.

Buy it from MA though, Teflon hose and steel HP fittings are total balls to assemble, worse than regular AN times 500.

[Ninjabread]

Sweet, You ever take it off any sweet jumps?

[aa87]

Showcarshowcarshowcarshowcar!

[McRussellPants]

Sweet, You ever take it off any sweet jumps?

as a matter of fact.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/proam07005.jpg

[Ninjabread]

That's what I'm talkin about.

/endnapoleondynamitequotes.

Nice car. Love the A/N blingz.

[blu808]

fuck yea !

how do you change/add your clutch fluid? lol

[!Zar!]

Hah. Only of the only real build threads on zilvia.

Looking at those pics make me want to go play golf with Armenian women while sipping on don perignon.

[racepar1]

WOW! VERY impressive! I would have designed the front section of the cage slightly differently, but that's really just nitpicking. I never thought I would say this with our history, but +1 for you.

[HS13KLS]

that picture is so dope..but back on subject...your words are honest... track car, does equal not driven ha. but keep us updated.. its SICK..

+1 for you

as a matter of fact.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/proam07005.jpg

[McRussellPants]

fuck yea !

how do you change/add your clutch fluid? lol

science?

lol, I haven't yet, it shouldn't be to awful though. the gusset is pretty high above it.

yeah Mustang guy didn't really get how 240SX dash works. But he put that cage in meth head style in like a day. so all thats gonna happen is Im gonna move the dash closer to me by about 3in.

as such.
http://i29.photobucket.com/albums/c252/dousan/new043.jpg

[Ninjabread]

yea... or drill a hole in the gusset?

rocket sci-fi.

[Dousan_PG]

i like ur car
i hope u can make ASB4!

3076
my hero!!

[Kuzumi]

can't wait to see it it running :eek3d: going to be fun when my car is ready also.

[blu808]

Its hard to tell from the pics. But if all else fails you can put a bulkhead fitting in the top of the clutch master cyl cap, and run a line around the gusset to a on/off valve. When its time to fill up, just open the valve and plug into the filler line.

[Prok0]

fuck yea !

how do you change/add your clutch fluid? lol

Dimple Die gussets for functionality and that added gangster.

PS. bmrs lines <3's you, say no to stainless braided shit.

[undesiredshoe]

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/proam07005.jpg

Dang, you got like 3 feet of airhttp://www.adiumxtras.com/images/thumbs/napoleon_dynamite_sound_sets_553516_thumb.gif

[Dominic Axelson]

Dang, you got like 3 feet of airhttp://www.adiumxtras.com/images/thumbs/napoleon_dynamite_sound_sets_553516_thumb.gif


lol.............

[Matej]

Car will never see a track ever, "Track Car" build = instant never gets driven.
Yeayay best attitude, what's the point of buying cool looking stuff when you don't get to cruise around the mall throwing candy at girls, track cars are lame.

[Johny5]

if there's one thing we can learn from this car, its that dimple die's are gay. hence, the lack of dimple dies on it. texas rules, you guys do not, we do not endorse dimple dies.

[McRussellPants]

rofl, oh shit, got Phillip neg reppin posts from years just to keep the points down without me noticing hahahahahahahahahahahaha.

God this Forum is fucking hilarious. hahahaha

car will be trailered to mall, Duramaxe's will be revved at teenie boppers in its stead. Should work better revving a truck at the 16yr olds anyway seeing as how this is texas.

corn bread and chicken
front porch pickin
ect.

[fromxtor]

With the help of Boost Logic.

Teflon hose and steel HP fittings are total balls to assemble, worse than regular AN times 500.

Thats where I come in, I make those at work. So I have the appropriate tools/equipment, and I pressure check them.:D

[steve shadows]

what happened to bashing the 3076r as a oversized laggy turbo?

So you go out and build an identical setup to mine? after talking trash at every turn?

You are something McRussel I will give you that much...

[McRussellPants]

what happened to bashing the 3076r as a oversized laggy turbo?

So you go out and build an identical setup to mine? after talking trash at every turn?

You are something McRussel I will give you that much...

I keep it sick.

Garrett forced my hand 3071 is super back ordered so I found this 3076 on the shelf at work and decided to go balls deep.

maybe it will suck, maybe it won't

either way Im ricer and adding Ported Shroud lag on top of 3076 lag just to get the 4in inlet E Frame. wanna trade for brand new precision E cover?

[steve shadows]

E cover sounds like a pretty cool idea. pm me a pic

I want better spool up, I have a standard S.

Cams makes the setup, 256 in 264 ex would be insane, I almost did this recently

[Brian]

BRO.... positive reputation points coming your way.

[steve shadows]

If your worried about lag with the 3076r just get a haltech and setup anti-lag

it works....I havent used mine lately though.

hope your getting .63 housing.

trust me when I say you don't need anything bigger than 260 duration.

[ALEXTHESUS*PECT]

science?

lol, I haven't yet, it shouldn't be to awful though. the gusset is pretty high above it.

yeah Mustang guy didn't really get how 240SX dash works. But he put that cage in meth head style in like a day. so all thats gonna happen is Im gonna move the dash closer to me by about 3in.

as such.
http://i29.photobucket.com/albums/c252/dousan/new043.jpg

i was wondering how you were gonna solve this problem. nice build!

[pr0ject TRUENO]

tejas no tenemos el dinero por los dimples

[LS240]

So if this isn't a track car, why did you go with full cage? Cage+unprotected head=
http://hoboken411.com/wp-content/uploads/2007/07/hoboken-crushed-watermelon-victim.jpg

[rps13drift]

So if this isn't a track car, why did you go with full cage? Cage+unprotected head=
http://hoboken411.com/wp-content/uploads/2007/07/hoboken-crushed-watermelon-victim.jpg

Cuz he is not a wuss!

[96Turbo]

Dimple Die gussets for functionality and that added gangster.

PS. bmrs lines <3's you, say no to stainless braided shit.

please explain what bmrs lines are???? I'm curious cuz i just ordered a high pressure -an setup for my hoopty. The lines are stainless braided teflon lined designed for high pressure applications (2500psi) and i got steel hose ends.

Another question...why is one of your -an adapters o ring, while the other isn't? And what paint is that on the engine bay?

Anyways, it your engine bay looks sexy. Looks like lots of money in -an hoses/fittings. Damn that shit adds up quick!! +1 for being such a baller

[Def]

You should finish screwing the nipples into most your AN hose end ferrules. They won't hold for shit with a gap that big. Proper gap between nipple and ferrule is 1/16" MAX.

[Johny5]

So if this isn't a track car, why did you go with full cage? Cage+unprotected head=
http://hoboken411.com/wp-content/uploads/2007/07/hoboken-crushed-watermelon-victim.jpg

SHUT
THE
FUCK
UP

[INeedNewTires]

niiiiiice, but will she be ready for Mineral Wells on the 13th?

[ms!3]

pretty sick. you think itll make it down to mineral wells anytime soon?

[McRussellPants]

You should finish screwing the nipples into most your AN hose end ferrules. They won't hold for shit with a gap that big. Proper gap between nipple and ferrule is 1/16" MAX.

wut?

oh, yeah, I haven't finished with them all yet.

I build AN lines all day long, lol.


hope your getting .63 housing.

trust me when I say you don't need anything bigger than 260 duration.

.63 GT 4 Bolt.

I was looking for the E frame Ported Cover though, I thought you had that.

Cams will come down the line. Big Lift 256s most likely

I'm not too worried about fighting lag, I know what I'm in for and its gonna be a total hooker but worst case is I'll just have to show the exedy whos boss.

I'll be running MS109 so I'm expecting it to be about like a 3071 on 93.

No Chance for 13th.

[sblack13]

mmm S15 Motor
mmm 3076
i'm jealous

[Matej]

So if this isn't a track car, why did you go with full cage? Cage+unprotected head=
http://hoboken411.com/wp-content/uploads/2007/07/hoboken-crushed-watermelon-victim.jpg
Dude come on you know there's nothing cooler than driving around town in a helmet waving at motorcyclists, and when you pull up at a gas station while everybody's staring you climb out through your Nascar bars and start feeding credit cards to the pump only after you set your steering wheel on the roof.

[clark]

http://www.klov.com/images/11/118124211079.jpg

i'm sorry but this is all i thought when i saw that smashed melon.

[jackjack]

OOooOOooOOoO FUCKIN SEXY

[JVDSKYRINE]

SHUT
THE
FUCK
UP

Agreed or maybe he can drive like this....everyones doing it I heard its the new fad.....

http://inventorspot.com/files/images/pillow.img_assist_custom.GIF

Or maybe he will just be awesome at driving and not crash

anyways sweeeeet ass car!!!!!! That engine bay is sooo clean I am jealous

[96Turbo]

http://www.klov.com/images/11/118124211079.jpg

i'm sorry but this is all i thought when i saw that smashed melon.

"wanna see me smash some fruit?!?!?! Black gallagher don't go out like a punk ass bitch with a mallet!!!!" - Dave Chappelle

[McRussellPants]

dude, this car won't see the street ever, fuck rock chips. show car.


Moreso, I'll drive this on a track, without a helmet. because this is Texas, we do it big, no faggot safety shit.

120mph on wagon wheels with a leather football helmet, like the all or nothing days.

[Andrew Bohan]

dimple died holes cause crashes

not having dimple died holes means not having crashes.

[Def]

wut?

oh, yeah, I haven't finished with them all yet.

I build AN lines all day long, lol.



Ok, just stood out at me. I've seen a lot of people making lines here and other forums recently that stop screwing the nippling in the moment it gets some resistance and leave like a 1/4-3/8" gap.

[afro88]

dude, this car won't see the street ever, fuck rock chips. show car.


Moreso, I'll drive this on a track, without a helmet. because this is Texas, we do it big, no faggot safety shit.

120mph on wagon wheels with a leather football helmet, like the all or nothing days.

HAHAHAHAAHAHAAAA I love the Texas drift scene! Like drifting in another country. Like WTF is safety?!?!?!

[upSLIDEdown]

Nice, loving the strut tower gussets.

+1

[Bubbles]

"Track Car" build = instant never gets driven.



Sadly, there is too much truth to this.

[!Zar!]

So if this isn't a track car, why did you go with full cage? Cage+unprotected head=
http://hoboken411.com/wp-content/uploads/2007/07/hoboken-crushed-watermelon-victim.jpg

PROOF Zilvia isn't ready for this orgasmic experience.

[azndoc]

Glad you were able to source your BV cage.

Engine bay looks good so far.

Awesome.

[Brian]

Whats your AFRs?

[McRussellPants]

Whats your AFRs?

13.5:1 Compression.

13:5:1 AFR.


dance with the VP Import devil.

[slideways2004]

13.5:1 Compression.

13:5:1 AFR.


dance with the VP Import devil.

nice. someone read their scc this month!

[slideways2004]

Glad you were able to source your BV cage.

Engine bay looks good so far.

Awesome.

alex doesn't make them anymore right??

[JVD]

I like your lol car. That is all.

[Brian]

Whats your boost?

[McRussellPants]

Whats your boost?

13.5bar.


for real.

[McRussellPants]

nice. someone read their scc this month!

no, i didn't

thank god.

it sounds retarded.

[Brian]

Did you decide to settle for the fully adjustable lower control arms, or are you just going to bargain with new ball joints? perhaps from MOOG?

Let me know.

I have a similar setup on the way, and I'd like to hear some firsthand information before I dive into this project.

[McRussellPants]

Painless going in.

could do it in a day if you wanted to, so nice.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Painlesssteeze.jpg

Dash Spacer mad fabrication, total ball buster.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Dashspacerbs.jpg

[vodka2]

nice thread.

[lilredstiffy]

russell,

how are you going to get the heater and aircon to work with your new setup?


Thanks

[IIIXziuR]

Looking good Russ.
How easy was that painless wiring system? (Which version?)
Seriously considering getting one as well from Jegs/etc.

Keep bringing the heat partner

[McRussellPants]

russell,

how are you going to get the heater and aircon to work with your new setup?

Thanks

tube connected from exhaust manifold to blower fan to my face.

[JVD]

tube connected from exhaust manifold to blower fan to my face.
Ahahaha. Total awesome.

[steve shadows]

.63 GT 4 Bolt.

I was looking for the E frame Ported Cover though, I thought you had that.

Cams will come down the line. Big Lift 256s most likely

I'm not too worried about fighting lag, I know what I'm in for and its gonna be a total hooker but worst case is I'll just have to show the exedy whos boss.

I'll be running MS109 so I'm expecting it to be about like a 3071 on 93.

No Chance for 13th.

Sweet same as mine.

I Run the TO4S Standard Un- Ported.

My car is retarded. I "HATE" driving it everywhere haha.

(mostly just because it's ugly)

Man up you can drift a 3076R it's almost exactly the same as the HKS 3037S that every one uses in Japan, you should be fine, just load up the rear by left foot breaking mid-apex then go up in jets of smoke, but you probably know that. ;)

*pm'd*

[slideways2004]

no, i didn't

thank god.

it sounds retarded.

yep! i can't believe i read it

[McRussellPants]

Flocked Dash.
30$, Worthwhile
Flash goes right through it so it kinda looks like ass in this pic.
Dash Spacer, kinda flexed during flocking operation but thats about how it fits.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/flockeddash.jpg

[Ninjabread]

That looks good.

Was it hard and/or messy?

[Def]

What kit did you use for the dash?

[McRussellPants]

can't remember.

some wood place or something.

I just googled "flocking"

[Style]

what is that "flocking"? like texture? is the dash still smooth?

[JVD]

what is that "flocking"? like texture? is the dash still smooth?
I'm pretty sure it's just spraying on a texture that's like suede.

[Ninjabread]

don't you apply glue, and then throw on some fibers, and charge it so that they are all erect?

maybe im just smoking too much.

[JVD]

don't you apply glue, and then throw on some fibers, and charge it so that they are all erect?

maybe im just smoking too much.
Maybe? I just know it's to make the dash like suede.

How did you do it russell?

EDIT: Seems like you just put glue down and then spray the fibers on top.

[DOOK]

it's when you rub your waner on it and sign camp songs....

nice show car build, I like it

[steve shadows]

^ I am interested pm me details








... seriously though I want to do that to mine.

[McRussellPants]

bought the mini flock kit.

lay down some tar looking glue stuff

use cheesey air pump to spray fibers at it

finish.

http://www.constantines.com/browseproducts/Mini-Flocking-Kit.html

that thing.

Dash is in and set, kill switch and painless switch panel is in.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Dashfinal.jpg

[McRussellPants]

Real Deal updates start swinging in this week.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/oillines.jpg

theNismoshop mailing in Motul/Gaskets/Belts
Baker mailing in SPAL Fans for V-mount
Precision Mailing in .63 Hotside for Turbo install.

A friend is hooking it up with a AIM Sports Mychron 3 Gold for Gauges+Datalogging.

http://www.aimsports.com/products/m3-gold-auto/index.html

1 month top before its doing mean ass burnouts in front of the mall.

[JVD]

1 month top before its doing mean ass burnouts in front of the mall.
Every stop light too.

1. burnout at red light

2. keep burning out until light turns green

3. scream off bouncing off the limiter in a cloud of smoke

4. pick up hot broads

[McRussellPants]

Taking it right into, the 3076 Dangerzone.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/TURBOZ.jpg

[GSXRJJordan]

Damn, TX brings the heat. Nice build, nice parts, nice 16yr olds.

NM, I'm sure they just look old for their age. Nice 13yr olds.

[rhs13]

That looks good.

Was it hard and/or messy?

hard AND messy. fo sho

don't you apply glue, and then throw on some fibers, and charge it so that they are all erect?

maybe im just smoking too much.

teehee. he wrote ERECT.

but anywho, nice build.

Taking it right into, the 3076 Dangerzone.



that's what im talkin about.

[96Turbo]

is that lavender frost i see??? Muy Bien!! How bout an exterior shot?

[Full-Lock]

setup seems solid..color is awesome too

nice to see that you stitch welded the chassis correctly

[boost_it7]

Looking good Russ.
How easy was that painless wiring system? (Which version?)
Seriously considering getting one as well from Jegs/etc.


+1
message length

[sijia10358]

wow! what a nice looking car...the wiring are super clean!!

[McRussellPants]

Finally got the turbo.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/TurboCooler.jpg

Oil Cooler shenanigans, Earls 425 should be big enough, the firesleeve I had left over and is mainly there to make sure nothing grounds out on the braided stuff.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/OilCooler.jpg


Front Bumper support / Future Tray Mount / V-Mount Holder / Oil Cooler Holder in progress, good buy for 16$.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/CrashBar.jpg

[rps13drift]

Very baller! Im realy liking the oilcooler and your placement for it!

[Def]

That's where I put my oil cooler. I ran my lines below though. Works pretty well when removing the front corner light on my pignose bumper.


Gets a bit dirty from the wheel kicking up crap on it, but oh well.

[McRussellPants]

yeah, I gotta get a screen for it for rocks, other than that it doesn't get streeted so it shouldn't be to big of an issue.

[McRussellPants]

Finished until I haul it up to the shop to get IC/Rad piping made and Brackets welded on.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/CrashBar-1.jpg

Everything but the ECU, Main Power and Ground are wired in.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/PainlessFinished.jpg

Fans, Motul and Downpipe Flange should be here next week, Getting AimSports going through Wisass.

Tuned on the 9th, off the rollers on the trailer for event on the 10th.

[illvialuver]

yeah i really feel the purple shits nice, and about the rollcage in a non track car, some pimps and badass' like to daily there shit., and on the side make it clean, iuts hard but thats what you gotta try for.

[Def]

yeah, I gotta get a screen for it for rocks, other than that it doesn't get streeted so it shouldn't be to big of an issue.

I really wouldn't worry about it then, it doesn't get hit with large direct debris. I was going to screen the back of mine until I saw that it really didn't get anything but some general road crap on it.

I would duct the front of it since you don't have a battery tray anymore. Just some sheet metal pop riveted up to about the general airopening.

[joefresh]

cars looking great rus-L
lol at the leg gashing hydro e-brake mount
this car is dangeroussssssssss

[McRussellPants]

cars looking great rus-L
lol at the leg gashing hydro e-brake mount
this car is dangeroussssssssss

Its a nice knee rest. surriously.

I would duct the front of it since you don't have a battery tray anymore. Just some sheet metal pop riveted up to about the general airopening.

The Entire front end is gonna be Aluminum Falcon.

[sldbyuramg]

nice car and clean setup...GT3076 is too laggy? i just came from a 37R on an evo8 and was planning on a 35R for my S13... a 3076 is one of the best turbos out for a 4cyl, sweet power and good spool.

if you guys dont like lag...get a setup with a supercharger or something...

[s14_legend]

:2f2f: up up and away :2f2f:

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/proam07005.jpg

[McRussellPants]

Goes to shop to get V-mount completed/Installed on Friday.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Aquatusklol.jpg
Finished Crash Bar
Near Finished Oil Cooler
245/40/17 A032Rs


http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Final.jpg

Everything Nearly done in here.
ATE Super Blue in and bled, (clutch wasn't too hard, at least before I put the solinoid on the gusset)
Boost Logic down pipe installed.
Wiring Done.
AEM Boost Control Solinoid Hiding in the corner.


Samco stuff should be here from Rally Nuts soon
AIM Sports from Wisass on Thursday or Friday
Rad Fans sometime this century (maybe) from Baker pecision.

Shoutout to all my homies in the 606 Get Live.
Boost Logic for hooking it up on Parts, and letting me bum the shop for V-mount Operation
Wisass and TIP Engineering for the AIM Sports MXL cluster.

[bryce with a y]

texas doing thangs

[McRussellPants]

http://img440.imageshack.us/img440/5464/mcpantsfc4.jpg

[theslows13]

looks great man! clean yet badass

[GSXRJJordan]

Goddamn that looks good. Moar piczz.

[arkive43]

razzle dazzle!!!!!

[sillyvia13]

lol....your sarcasm made it to me! lol...without a big flashy sign saying *sarcasm* lol...your a funny dude!
Your cars the shit.
nice shit bro!

[Char]

What intercooler is that?

[canas]

whats the point of the roll cage? 8?

[McRussellPants]

Bell Intercooler

24x10.3x3

Boost Logic made intake, charge piping, ducting, ect. Helping me out of control.

its got alot more progress now, maybe pics later tonight.

Baker Precision finally got me both my SPAL 11ins after 4 weeks, fantastic.

should run later tonight, its already been started a couple times, need to start programming the aimsports.

[RedSVTFlareside]

Looks badass

[koukimonster139]

sick.


all the glitters make my back pussy wet

[Char]

So its not a custom intercooler? Ive wanted to in with a v mount but from everything I could find it seemed too much of a hassle and not worth it. But your set up looks like it wouldnt have and problems. Stock koyo too?

[GSXRJJordan]

The only "special" stuff you need is an intercooler with tanks wide enough at the bottom to move the 'ports' to the correct position, a radiator breather tank (like he's got on the passenger side of the motor against the firewall), and some bracketry/ducting. Not saying its an easy task, just that it doesn't take "custom" parts.

[McRussellPants]

Marc from Boost Logic and I fabbed this up in 6 days after work. Its not nessicarily hard, but its alot of fabricating.

Its a total pain in the ass. I don't know if its gonna overheat much less if it will actually help anything.

I just hope 3076 isn't too big of a bitch to drive.

and I hope I can get at least 5 passes on this Exedy Stage II before it goes in the dumpster for an HKS Twin Plate.

Fuck this stupid money pit of a car

[RedSVTFlareside]

You've got a lot of time into this car. It'll be nice to see it running again.

[O3DigitalBath]

god, seems like everyone is doing really nice setups recently

[backroadtouge]

good thing there are no walls at mineral wells
;)

not to say you'll wreck and total it and catch it on fire, just, you know dont want that time wasted

[steve shadows]

Marc from Boost Logic and I fabbed this up in 6 days after work. Its not nessicarily hard, but its alot of fabricating.

Its a total pain in the ass. I don't know if its gonna overheat much less if it will actually help anything.

I just hope 3076 isn't too big of a bitch to drive.

and I hope I can get at least 5 passes on this Exedy Stage II before it goes in the dumpster for an HKS Twin Plate.

Fuck this stupid money pit of a car

Did you take my advice on the housing size? Smaller housing equals a little faster spool (almost all the time).

3076 is not a bitch to drive if you know how to drive a big turbo car.

It's not that big, but it is slightly laggier than the standard 3071R.

[aaronlosey]

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/VMount2.jpg

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Vmount1.jpg

operation complete.

-lol wrong screen name

mcpants

[Brian]

so hot this season

[Andrew Bohan]

high five! :w00t:

[IIIXziuR]

That ducting is serious bizznass

+ Style points at Hot Import Nights

[Ian]

i like your metal pieces that go to your strut towers


very engineery looking

[a_ahmed]

Frickin wow, your project is kicking ass, keep it up.

[Dousan_PG]

cut that ziptie!


looks like shit

not HIN quality

[DOOK]

from the camera angle is looks like the passenger side tire would be cutting it pretty close to the oil cooler at full lock toward the driver side... is it just the angle or is it really pretty close?

[Char]

from the camera angle is looks like the passenger side tire would be cutting it pretty close to the oil cooler at full lock toward the driver side... is it just the angle or is it really pretty close?

The oil cooler is completely mounted in any of those pics. He is having it attached to the bar.

[tt99ol]

vids
or ban
pweese

[silviaz]

daaaaaaaaaaang that's hot.

[CAR_sileighty]

awesome build up, it all looks so good lol
cant wait to see it in person.
mineral wells??

[McRussellPants]

Screenshot from Race Studio.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/AIMPrintScreen-1.jpg

Super cool. Can run up to 8 sensors through it without getting data hubs. I mounted the MXL above where the blinker stalks used to sit so its pretty close to me.

Probably get the wideband controller so I can run my O2 though the MXL.

[GSXRJJordan]

That's fuckin cool.

[Char]

Saw one of those last year, did a little reading on their site and am putting one into my 240 also. Im not using any of the stock cluster though, so Im going to see about mounting it more flush with the dash since its about the same shape.

[IIIXziuR]

Yeah thats awesome looking.
Should probably be awesome on the track....oh and get you a date or two.

[J ROK]

wheels painted white would look beautiful. F*cking sick project.

[Wiisass]

Screenshot from Race Studio.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/AIMPrintScreen-1.jpg

Super cool. Can run up to 8 sensors through it without getting data hubs. I mounted the MXL above where the blinker stalks used to sit so its pretty close to me.

Probably get the wideband controller so I can run my O2 though the MXL.

You're supposed to click the check box next to the enable static string and then you can use that for motivational messages. It's probably my favorite part of the dash.

[GSXRJJordan]

Hahaha Tim, "you're doing great, for a girl! now step on it!"

or: "moar anglllle. Do it."

or: "honey, you didn't do the dishes. -wife"

[Char]

"never lift"

[drftwerks]

neko case? really?


haahha


jk gauge looks hot

[INeedNewTires]

I was wondering about your PS cooler setup... Ive seen other guys run it but theirs wasnt like yours, so i did a lil mspaint to show you. I figure i know you do your research, and maybe it doesnt matter, but is there a correct, or better way to run it? do you want the hotter oil going to the cooler first, or do you want it to go to the cooler right before it goes into the ps rack? also which one is push and which is pull?

Heres stock

http://i230.photobucket.com/albums/ee309/ineednewtires/Car%20Pics/pwrsteercoolerMcpants-stock.jpg

Heres yours

http://i230.photobucket.com/albums/ee309/ineednewtires/Car%20Pics/pwrsteercoolerMcpants.jpg

Heres Others

http://i230.photobucket.com/albums/ee309/ineednewtires/Car%20Pics/pwrsteercoolerMcpants-other.jpg

[McRussellPants]

Totally.

Not the gayest thing I listen to.

by any means.

Nothing Changed really, besides actually running.

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Picture003-1.jpg

Aim MXL Strada and mostly finished interior, passenger gets Greddy Belts, fuck em.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Picture004-1.jpg
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Picture002-1.jpg
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/AIMPrintScreen-1.jpg

Other crap at the shop, 1533whp 6-Speed Supra, 7.8 @ 186 Auto Drag Supra. GT5591s on both.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Picture005-1.jpg


Someone in TX (no dimples) (no dimples) paint their shit teal for easter egg driff.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/Picture006-2.jpg


The guy about to tune my car, Tuningconcepts.com just did a Motec Logger with "you're fucked" as the static string if the oil pressure drops to under 10psi above 7000rpm.

[ByeByeSti]

haha wowwww supra love right there. such a big ass turbo.

btw the s13 is sexxxxxxy. keep us updated

+1!

[McRussellPants]

Made a couple run at UpRev on the wastegate spring today



275Ft/Lbs at 4000RPM 305 ftlbs at 4700. Followed by hilarious sizemograph line from broken coilpack finally giving up the ghost.



should come up a little faster once I get a boost controller sorted out.



I got my car back to the shop to see my new coilpacks had come in, so should be back on the dyno for the real deal sometime in the next week.

[arkive43]

Someone in TX (no dimples) (no dimples) paint their shit teal for easter egg driff.



:hs: IM THIS CLOSE DUDE.....

[2JZGTE]

Nice car man. You mentioned getting wideband o2 and just display it on the AIM dash.

It works real nice, we set-up an AIM dash in my Supra w/ a Motec 800 ECU and it's incredible. Made a carbon panel to replace oem cluster. I don't have a single gauge or stock cluster anymore because this thing reads out everything I need and more (plus 6 programmable warning lights and F1 style shift-lights on the top). And yes, fuel level.

All six warning lights are functioning (low oil press, low batt, high water temp etc).

GL w/ the rest of the build..Billy


http://img89.imageshack.us/img89/7933/aim2gm0.jpg

http://img61.imageshack.us/img61/397/aim1qa1.jpg

[McRussellPants]

yeah I need to screw with the AIM some more.

Need to pick up Boost and Lambda on it, have everything in one cluster would be the bees knees.

but first I need new engine harness and stuffs.

[Jordan-S13-Silvia]

:bigok: This is a really nice build Russel i cant wait to see it on the track. Hopefully real soon.

[jbuckley]

cars lookin good!

[McRussellPants]

http://i10.photobucket.com/albums/a120/SILMASTERFLEX/111_1103.jpg

The last run was 380hp 360tq but he ran it out to the limiter so it freaked out the line.

at any rate, I'm happy as a clam.

380whp at 18psi and stock cams is fair enough for me. 300ft/lbs at 4200? thank you ma'am.


Special Thanks to.
www.boostlogic.com for the turbo, manifolds, v-mount, errything.
www.tuningconcepts.com for 5hrs dealing with retarded problems on the dyno and the fresh tune.
www.uprev.com for letting me use their dyno for 5hrs (attn 350Z guys these bros have a cool product)

[GSXRJJordan]

Absolutely beautiful dyno curve... sure the cams are holding you back at the top, but shit - 300ft/lbs @ 4.2k is unbelievably nice.

I bet it drives like a dream.

[McRussellPants]

Pics of driffin:

http://fabricatedmotorsports.com/forum/index.php?topic=293.msg2845#new

Vids of said driffin.

First run a new set of RE01Rs on the rear caught me off guard. Blue car is Aaron Loseys 460hp LS1 car. Course was clutch kick the 4 shift into the first corner and ride 4th until about halfway though.

http://www.youtube.com/watch?v=tsi9yTbOknY

[jbuckley]

sweet , car looks really good i cant wait to go drive

SWEEET

[surge s14]

man your car is sick the V mount gives me a stiffy.

Aaron car just amazing to watch never seen it in person though...

btw +1 for power power curve

[steve shadows]

Your seeing torque that early because it's a dynojet and more than anything your using stock cams.

would be a little later on a load eddy dyno

I would be looking for about 440 whp on a dynojet with 264 step 2s and a greddy plenum. not sure if your going this route though

[McRussellPants]

I'd go to 21psi before I put cams in.

[INeedNewTires]

car looked awesome at the event... cant believe i'm not in the video at all even though i did a bunch of runs in between those other guys.... your tandem with aaron was sweet though i got a couple shots of it in HD i'll post later

[ESmorz]

Damn fine build sir.

Beastly.

[steve shadows]

I'd go to 21psi before I put cams in.

do 22

do it

[miggypq21]

Kick ass driving man, why are you against getting cams haha.

Where was the vid at, I need to hit up some events here in Texas lol

[McRussellPants]

www.fabricatedmotorsports.com

[Jordan-S13-Silvia]

Wow badass vid russel that was some sick footage!! nice dyno sheet I cant believe that stock cams could make it far nice work.

Have you picked out a set of cams to get in the near future.

Keep up the great work man.

[JAEBEATZ]

+~1 SICK CAR!!:rawk:

[phi_ho1]

cool car nice engine bay

[McRussellPants]

Comparo Left Un-cut/Right cut doesn't look too substantial, but its a pretty reasonable jump in person or if I could show it right. took me like 2hrs to do both sides and they came out dead on even.

Went on the car today, need to ditch the steering stops for good evaluation, but they mostly miss the steering stops when on the ground and got a taste zero bind, quicker steering, should be able to turn on about a 6-8ft diameter circle on the inside rear, pretty spiffy
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/RussellPants001.jpg

Got this in, dunno if I'm gonna fix the angle on the net. I got the net in literally the day before NOPI was cancelled, whatever, Hlloween rolls nets, I ain't scurred. And windows up for tandem is the most pain in the ass shit ever.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/RussellPants003.jpg

About to cut the floor board out Silent Slide / DSG style to get that guy in towards the trans tunnel and on the floor. Yes, passenger still sucks it with greddy belts.
http://i10.photobucket.com/albums/a120/SILMASTERFLEX/RussellPants004.jpg


Hooker Harness and some other ricey shit should be end at the end of next week too. HIZZAH!

[McRussellPants]

Aight, its been a while but a couple things have changed.

Garage BB 1800mm Wing, Hard Mounted to the chassis
Fiberglass Hatch with Lexan
D-Max Hood
Plywood Splitter.
SPL Parts Version 2 Links

Also some Advan RZ 17x9.5+30 18x10+25, 8 Total, got em from Francis at ASpec, hes a pretty rad dude. I usually run 245/40/17 Star Specs 275/35/18 DZ101, big tire and a 2400lb curb make the car pretty fast, I think my qualifying speed at Anaheim was 1mph off Saitos

And so that was cool. and I finally got used to 360ftlbs, and can make it do burnouts while turning ok now. So Im 9th in D1GP USA overall, I have my Pro-Am Invite, and got to do some drift demo in Wisconsin with monster trucks and all that jazz.

http://www.tunerzine.com/coverage/328/images/d1_grand_prix_anaheim_198.jpg

http://www.tunerzine.com/coverage/328/images/d1_grand_prix_anaheim_332.jpg

http://www.floridaracing.org/drifting/d1gpmiami09/top16/images/IMG_1688.jpg

http://www.floridaracing.org/drifting/d1gpmiami09/prac/images/IMG_0946.jpg

This is a video of local stuff with some of the dropfest demo. Inside of the X was prolly 80-85, near zero wheelspeed in third at 7800. I've been fighting a blown wheelbearing that makes for some sick toe changes on the back.

Russell's big video on Vimeo (http://vimeo.com/5345258)

But thinks to all of the shops who have helped so far
SPL PARTS (http://www.SPLParts.com)
Latest Legocentric News and Information (http://www.BoostLogic.com)
Tuning Concepts (http://www.TuningConcepts.com)

Hopefully I can find some more support for the rest of 2k9, My schedule is pretty intense, the truck should have 40,000 more miles on it by the end of the season. But Im there reguardless.

From here on out this car begins its trek to a backup/missile car, Im starting to build a 2004 STi, and Boost Logic is interested in support for a JZS161 Aristo demo car.

[ericcastro]

very nice russell.

we met a D1.

what thickness lexan did you use??

Im trying to find some on movie sets right now but everything is like 1/2 or more.

[McRussellPants]

1/8th, it holds shape ok once its bolted down

[Taniguchi_Is_#1]

it would have been cool if your path to missile car began with nomuken t-boning you. haha.

[ericcastro]

it would have been cool if your path to missile car began with nomuken t-boning you. haha.
Nomuken would have had to qualify though right?? lol
Oh, the drift box and Nomuken not making it in.
Poetic justice?
irony?
lol?
;)

thanks Russ! thats what I thought. Just wanted to make sure.:wan:

[Taniguchi_Is_#1]

Nomuken would have had to qualify though right?? lol
Oh, the drift box and Nomuken not making it in.
Poetic justice?
irony?
lol?
;)

thanks Russ! thats what I thought. Just wanted to make sure.:wan:

http://x74.xanga.com/3c9f354b24c30247717511/w196412342.jpg

[ericcastro]

^ I believe thats just practice runs though right?
I know thats Nomuken, cant miss that veritech body kit, but getting taken out in practice dont count.
just sayin.

Had it been in tandem comp, thats a whole other story :D

[Choku_Dorian]

mineral wells is he shiz...

sick car sick driving.

[s13 @ fullboost]

I really <3 teh cage

[McRussellPants]

^ I believe thats just practice runs though right?
I know thats Nomuken, cant miss that veritech body kit, but getting taken out in practice dont count.
just sayin.

Had it been in tandem comp, thats a whole other story :D

Yeah, that was first round of Top 16 in Miami.

I nearly totaled my car in a totally different fashion, hit a bump that tried to straight line me towards the wall, barely saved it. Wing end plates over the wall, it didn't feel as balls deep in the car though. Nomura was hanging back waiting for me to murder my car and pass me. When he saw I somehow saved it he was back on my door in like half a second though.

All that nonsense can be seen here.
YouTube - D1GP Miami (http://www.youtube.com/watch?v=U5EXMzPBAwE)

[ericcastro]

^WOW !!

Impressive save Russell!!
All those years of drifting added up into natural reaction and you saved it.
very impressed!!
:)



No wonder me and Tanaguchi #1 were off. I didnt realize you went to Miami.
I thought that pic was from Anahiem.

YouTube - Miami - Will Smith [Original Video] (http://www.youtube.com/watch?v=xdypWeO5MRA)