View Full Version : s15 subframe
Dousan_PG
03-25-2008, 11:11 PM
im still looking for one!
local pickup preferred (kd go to fresno to san diego if needs be)
Gumballf355
03-26-2008, 01:24 AM
How can you identify an S15 subframe to a s14 subframe?
Dousan_PG
03-26-2008, 02:01 AM
i used to have one
iirc there are some tabs welded on top of the LCA brackets that s14 wont have
rear section of mounting points is boxed in inside rear subframe
i forget about the LCA mounting angle i think it differs too from s14? i know s13 its def different
i cant remember much else. its been so long since ihad one.
fakts13
03-28-2008, 10:56 PM
s15 is a reinforced s14 member. i think the difference (if any) is so minute i think you'd have a hard time telling the difference. maybe it would be a better idea to just get an s14 member and gusset all the mounting locations
racer98
03-29-2008, 01:07 PM
How can you identify an S15 subframe to a s14 subframe?
couple of things
1_ speed sensor in the diff
2_ open up casing diff cover
3_look for part # 's on the diff.
Gumballf355
03-29-2008, 03:17 PM
I thought the suspension geometry is a tad different... better throttle on grip... did I hear wrong?
racer98
03-29-2008, 03:21 PM
I thought the suspension geometry is a tad different... better throttle on grip... did I hear wrong?
S14 has the same control arms but you will notice the sway bar is larger and shorter in width, note the speed sensor on the front of the diff area !
Dousan_PG
03-30-2008, 12:39 PM
i dont want the faggot diff
just the subframe! bare naked
racer98
03-30-2008, 01:45 PM
i dont want the faggot diff
just the subframe! bare naked
Oh, I have one right now, but I dont want to sell it.
glwsearch
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.