best place to purchase heater hoses

[tony96240sx]

ok i am in the middle of dropping in a sr20det redtop into my s14 and i want to purcahse heater hoses for it,,,anywhere have the heater hoses for sale,..i heard stories of keeping away from heavy throttle heater hose kit..is there anywhere else that have the correct complete kit? i did a search and didnt find this topic

[clark]

if you're creative and have a good imagination, you can just get the right length of bent hose.

or you can just purchase these:

http://storesense.megawebservers.com/HS318/-strse-820/Heater-Hoses-for-S13/Detail.bok


what stories did you hear about the kit HT sells?

it says for s13 but i can't see that much of a difference.

[garagelu]

i bought my heater hoses from xatracing.com. I dont know if they sell them anymore. Its possible to custom route it by just going to the parts store and find a hose that will work. You may have to cut and reroute it though.

And no one will have the correct kit for s13 sr into s14. All the heater hoses sold are for s13 sr to s13. I just bought it and figured out a way to make it work.

[clark]

frsport has em too:

http://www.frsport.com/OEM-Heater-Core-Hoses-Conversion-for-USDM-240SX-with-S13-SR20DET_p_8951.html

[tony96240sx]

thanks for this info..the frsport one looks good enough

[tony96240sx]

oh by the way ..why does frsport have 3 hoses and enjuku has 2 ?

[clark]

http://www.frsport.com/Contact%20us_g_contact_us.html

you can probably still get a hold of them, it's only ~4:30 there.

[Okinawandrifter87]

Just go to your local autzone store and get the proper connectors from the USDM and JDM hoses and any hoses extra you might need. I just did this on my SR swap too like a week ago and you only spend about 20 bucks or less when done right too ;0)

[garagelu]

oh by the way ..why does frsport have 3 hoses and enjuku has 2 ?

read the description on the frsport.com heater hoses. "You will have to cut these hoses to length to fit your engine & chassis." Basically they give you three hoses and you have to figure out how to fit them. Basically the same as going to the parts store and figuring out what will work.