S14/s13 garage sale + vq35de + ka24de + (2) 350z transmissions

[kcndizzle]

Okay, I've got to clean out the parents garage, and my storage unit.

S14 t28 sr oil lines......................$55 (not sure what brand, I bought an s14 t28 from rhdjapan a while back and these wer on it. Braided stainless, needs banjo bolts)
s14 distributor ...........................$30
s14 throttle body (auto)...............$30
s14 cams...................................$30
s14 valve cover...........................$45
s14 rear seats.............................$75 ( a bit dingy, but a good scrub would do them well)
s14 rear subframe.........................$80 (all the bushings are in good shape, just stripped one of the diff mounting threads, some elbow grease and some know-how would make it new again)
Full set of s14 kyb gr-2 + stock springs...$120 (kyb's were used for approx 200 miles before I got my coilovers)
s14 stock header..........................$30
Power steering hose......................$20
s14 stainless dp............................$50
s14 alternator...............................$40
Front s14 4-lug hubs......................$30 (one set with abs rings and one without
Rear 4-lug hubs.............................$30
Ichiba 25mm 4-lug spacers...............$65
engine mounts out of an s14............$30
95' fuel rail + injectors.....................$50 (supposedly has torn o-rings)
97' fuel rail + injectors.....................$60 (perfectly fine)
s13 steering wheel with cruise control.$20
s14 door panels...............................$60
(1) z32 alum. 26mm caliper................$40 (apart, but I have the bolts, you just need the o-rings to make it work again)
s14 zenki radiator brackets................$10
set of front s13 lca + spindle + hubs....$50
ka24de motor with all the peripherals pictured. burns oil, I think it might be a headgasket.....................................$ 175

vq35de longblock from a transverse engine car, was told it needs rings, the buyer should probably break it down and build from the ground up................................................ .$200
(2) 2004 350z transmissions approx 50k on each, buddy and I bought them thinking we were going to do vq35 swaps, that never happened. We never ran them, so the condition is unknown..$250 ea.

These pics should include any and all things listed, anything in the pics that I didn't list and you want, just inquire about it and I'll let you know. Prices are obo, but don't go crazy with the lowballing.

http://i147.photobucket.com/albums/r285/sac240/DSC02893.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02891.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02882.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02881.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02880.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02879.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02878.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02877.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02875.jpg
http://i147.photobucket.com/albums/r285/sac240/DSC02874.jpg

[redrumkustums]

can you take some closer pics of door panels please, any other interior pieces radio bezel, center console, dash? i want those gr-2s too, pm you in the morning thanks

[sac]

does anybody make a kit for the z33 trans?
i am lookin for one to go into a s14 w/sr..
mazworX used to.. but they said they dont anymore.
IF someone does, i would be interested in a tranny.

[khmerguy618]

fuck, i want that VQ and tranny argh.

[kcndizzle]

Redrum-got your message, I'll get some better pics and give you a ring later today
sac-have you called or emailed mazworx? They've made the adapter plate in the past, and knowing that, they would probably cut you one if you were real nice. or, hell, see if you can buy the schematics and have a machine shop closer to you make one and machine your bell-housing.
Khmerguy- they're here for ya, and so reasonably priced too!

[Aeroscraper326]

PM'd..............

[FaLKoN240]

Kent is a good dude, had my back when my KA-T wasn't running right.

[kcndizzle]

Thanks for the vouch Scott, but it's KURT. tear...

[FaLKoN240]

I got 50% of your name right... :)

Haha, anyways you're the shit, hella helped me out when I couldn't get my car to run right.

[sac]

sac-have you called or emailed mazworx? They've made the adapter plate in the past, and knowing that, they would probably cut you one if you were real nice. or, hell, see if you can buy the schematics and have a machine shop closer to you make one and machine your bell-housing.

I tried callin them. They said the z33 belhousings dont fit in their machine.
I havent tried Buying the schematics.. thats a good idea.
I will try that. A 6 speed SR would be nice..And it would be alot stronger than that s15 trans everybodys breakin...

[mig240sx]

Sent you an email and pm. Let me know, I'm very interested in the s14 kyb gr-2 + stock springs.

[kcndizzle]

I got 50% of your name right... :)

Haha, anyways you're the shit, hella helped me out when I couldn't get my car to run right.

haha, Oh Scott, you slay me.

Sac-let me know how it goes, I'm sure if you got your hand on just the schematics you could rig something up. Or maybe they'll cut you a one-off trans adapter.

Thanks guys for the interest. Willing to wheel and deal if you're buying multiple items!

[kcndizzle]

Bumpity bump bump, pretty much everything is still for sale, added some sr oil lines.

[kcndizzle]

Alright guys, one more bump then I'll let this thing die. Somebody has got to want some 350z tranny's or something!