extended stud

[mnguyen1125]

im runnin ichiba 5 lug hub in the front of my s13... which extended studs do i get? thanks

[garagelu]

Well since you have ichiba hubs, have you considered getting ichiba extended studs? Tougefactory.com sells them.

Nismo has the best quality extended studs though. Peak performance is also good. The diameter of the stud is 13mm.

[mnguyen1125]

Well since you have ichiba hubs, have you considered getting ichiba extended studs? Tougefactory.com sells them.

Nismo has the best quality extended studs though. Peak performance is also good. The diameter of the stud is 13mm.

ooh i didnt know i can use peak performance on the ichiba hub but thanks for the info

[mnguyen1125]

what is the diameter of the studs for s14 rear hubs

[5t341tH]

So the Ichiba front studs are 13mm knurle(sp)?
is the rears also same size

[mnguyen1125]

So the Ichiba front studs are 13mm knurle(sp)?
is the rears also same size

i think so but i was tryin to find out s14 rear because i had accidently order 20 studs and i was thinkin if it will fit the rear on the s14 rear hub

[nisans13turbo]

S13 front and rear hub and s14 rear hub has the same diameter 13mm assuming oem studs. Inchiba's 5lug hubs are different, the front hubs are 14mm and rear are 13mm.

So if you want extended studs for the ichiba hubs, get 14mm front/13mm rear

I just gone through that mess and found out the hard way, this should work out for the rest!

[5t341tH]

nice. luckily i didnt buy a new stud for my ichiba fronts yet. so s14 front studs are 14mm correct?

[nisans13turbo]

S14 ichiba front studs are 14mm correct?

That is Correct!

[Slidin240Wayz]

Be careful with your knurl diameters.

14 and 14.5 will make or break a wheel stud.

[mnguyen1125]

S13 front and rear hub and s14 rear hub has the same diameter 13mm assuming oem studs. Inchiba's 5lug hubs are different, the front hubs are 14mm and rear are 13mm.

So if you want extended studs for the ichiba hubs, get 14mm front/13mm rear

I just gone through that mess and found out the hard way, this should work out for the rest!

thank you .....

[hotlavaflow]

Well since you have ichiba hubs, have you considered getting ichiba extended studs? Tougefactory.com sells them.

Nismo has the best quality extended studs though. Peak performance is also good. The diameter of the stud is 13mm.

I just see 50mm extended studs at Tougefactory as the longest. Where are the 60mm studs I see everyone rocking?

[nisans13turbo]

google next time and type in nismo studs you should see many sites.

[hotlavaflow]

^^^I've seen them on other sites I just thought they would have them at Tougefactory.

[McCoy]

I asked this same question to Ichiba-usa today and got the following response.

copy and paste...

FOR THAT PART NUMBER IT WOULD BE THE FRONT AND THE STUDS SIZE THAT COMES WITH IT IS THE 14MM AND THE REAR IS 12.75MM