cutter
03-19-2008, 03:34 PM
ok this is a rwd sr .
head-$350
race port
full radius valve job
jwt valve guids
resurfaed
the head will come bare with nothing but cam caps. i have 1 bent intake valve and the machine shop said it was not bad. there is no damage to the head. if you want all the valves i will throw them in for $25
det valves 7 intake 8 exhaust- $35
roller rocker hvla kit- come with the 01 g20 lifteres 99 sel rocker arms already machined, and 16 notched shims. rev to 9k with not problems from your lifters. $200
supertech dual valve springs and titanium retainers- both machine shops that i have taken this motor to said that the valve springs were some of the best they had ever seen. and one of them built an integra that runs 9.40 with full interior, and the other one holds the land speed record for some chevy car . $250
tomei rods- they are in perfect condition. they retail at spl for $1160 they have the bigger l19 rod bolts. the rods will hold 900 hp. $550
rwd block with crank and arp main studs. crank has been balanced and polished. block was bored to 86.5 mm with a torqueplate. $500
weisco pistons-9-1 compression 86.5 mm these have about 2500 miles on them. $200. they do not come with rings.
rwd block upper oil pan- 50
rwd lower oil pan- 55
lowball me if you feel like getting e-punked out. prices are fair and firm.
head-$350
race port
full radius valve job
jwt valve guids
resurfaed
the head will come bare with nothing but cam caps. i have 1 bent intake valve and the machine shop said it was not bad. there is no damage to the head. if you want all the valves i will throw them in for $25
det valves 7 intake 8 exhaust- $35
roller rocker hvla kit- come with the 01 g20 lifteres 99 sel rocker arms already machined, and 16 notched shims. rev to 9k with not problems from your lifters. $200
supertech dual valve springs and titanium retainers- both machine shops that i have taken this motor to said that the valve springs were some of the best they had ever seen. and one of them built an integra that runs 9.40 with full interior, and the other one holds the land speed record for some chevy car . $250
tomei rods- they are in perfect condition. they retail at spl for $1160 they have the bigger l19 rod bolts. the rods will hold 900 hp. $550
rwd block with crank and arp main studs. crank has been balanced and polished. block was bored to 86.5 mm with a torqueplate. $500
weisco pistons-9-1 compression 86.5 mm these have about 2500 miles on them. $200. they do not come with rings.
rwd block upper oil pan- 50
rwd lower oil pan- 55
lowball me if you feel like getting e-punked out. prices are fair and firm.