PDA

View Full Version : I need your opinions!


samsx
03-19-2008, 02:48 PM
I got a set of Gramlights 57S, 18x9.5 +22 all around. 235/40/18 front and 255/40/18 rear. I also have a set of 15mm spacer to the front, and 20mm to the rear. I would like to keep my stock fenders if possible. Will it be doable with just rolling and pulling? Or will I need overfender? I'm asking cause I can't test it on the car until winter finished. Thanks

azndoc
03-19-2008, 02:51 PM
Your going to need overfender for the fronts for sure.

The rear would need a pull. How big, just depends on your camber and ride height.

samsx
03-19-2008, 04:45 PM
Are you sure that I can't just roll up de front too?

silviaguy240
03-19-2008, 11:32 PM
you can camber in a shit load with a small pull in the front, but a 20mm fender would be better

ILoveMyRHS13
03-19-2008, 11:34 PM
20mm fender would be ideal, yes... You could do some insane cutting/pulling of the front.

pbcstylez
03-21-2008, 12:32 PM
if u dont run the spacers you should be ok w/ roll

samsx
03-21-2008, 03:48 PM
if u dont run the spacers you should be ok w/ roll

But I'm really nut sure they will fit without spacer in the front...18x9.5 +22 235/40/18...

jspaeth
03-21-2008, 03:55 PM
Yeah those are gonna be fun to fit on an S13

18x9.5 +22 with 20mm spacers in back, 15mm in front hahaha

thats gonna be so fun....probably need overfenders in back and front.

samsx
03-21-2008, 04:15 PM
Yeah those are gonna be fun to fit on an S13

18x9.5 +22 with 20mm spacers in back, 15mm in front hahaha

thats gonna be so fun....probably need overfenders in back and front.

should I find other spacers? What do you think?

95KA-Turbo
03-21-2008, 04:23 PM
run a 10mm spacer in the front and a 15 in the rear.

Run 235/40s in the back and 225/40s in the front.

Problem solved.

samsx
03-21-2008, 11:17 PM
run a 10mm spacer in the front and a 15 in the rear.

Run 235/40s in the back and 225/40s in the front.

Problem solved.

Yeah... but I already have all my stock :wtc: so i will try to make it fit...

fliprayzin240sx
03-21-2008, 11:54 PM
Run the minimum amount of spacers up front so you dont have to get wide fenders. Im running 18x9.5 +12 with some 235/40s RT615s and im not rubbing on anything. The rear, dont bother running any spacers with those 255s, you will have to roll and maybe pull it a bit to fit those tires in the back depending on how low your car is.

For reference: 18x9.5 +12 with 235/40 18s all around...
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/IMG_4697.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/IMG_4698.jpg
http://i58.photobucket.com/albums/g254/fliprayzin240sx/Zenki%20S14/IMG_4699.jpg