PDA

View Full Version : Wanted: Power Steering High Preassure outlet bolt

Rogue240sx
03-15-2008, 01:13 PM
I need this part for my '92 240sx KA24DE project car. I keep getting the wrong bolt from other people though so I'm including a picture of where the bolt goes. This is the bolt that holds the high preasure fitting to the pump. Help me out I can't find this fucking bolt anywhere! :ugh:
If I could get the copper seals too that'd be great. Thanks!

http://img.photobucket.com/albums/v232/RogueTorino/PA140048.jpg (http://smg.photobucket.com/albums/v232/RogueTorino/?action=view&current=PA140048.jpg)
http://img.photobucket.com/albums/v232/RogueTorino/braidedpsline.jpg (http://smg.photobucket.com/albums/v232/RogueTorino/?action=view&current=braidedpsline.jpg)
jspec240
03-15-2008, 02:17 PM
hmm well not sure how much its gonna be. I know its crazy expensive for overnight shipping. like 40$ from ups just for some paperwork to the east coast so Im willing but not sure how much. Ill check but dont want to send until I find out how much its gonna cost
Sr20det>Ka24de
03-15-2008, 02:31 PM
here is a line i looked at for my sr it is pretty nice i know someone who has this exact hose, fittment was great much better looking than stock


http://cgi.ebay.com/ebaymotors/POWER-STEERING-LINE-S13-S14-180SX-240SX-SR20DET-KA24DE_W0QQcmdZViewItemQQcategoryZ33588QQihZ011QQi temZ320227678006QQrdZ1QQsspagenameZWDVW
jspec240
03-15-2008, 03:04 PM
Very nice!! ^^ damn I might get one :)
Rogue240sx
03-15-2008, 03:11 PM
here is a line i looked at for my sr it is pretty nice i know someone who has this exact hose, fittment was great much better looking than stock


http://cgi.ebay.com/ebaymotors/POWER-STEERING-LINE-S13-S14-180SX-240SX-SR20DET-KA24DE_W0QQcmdZViewItemQQcategoryZ33588QQihZ011QQi temZ320227678006QQrdZ1QQsspagenameZWDVW

Wouldn't fix my problem. I'd still need the missing bolt.

Thank to Jspec240 I have the bolt on the way.
jspec240
03-15-2008, 11:30 PM
^^^^ well auctually I think it will. I sent off the bolt but if you look these have the bolts attached to the lines so you wouldnt need one.

Drew
Rogue240sx
03-15-2008, 11:34 PM
please tell me you sent the bolt that goes into the actual pump and not the end of that adapter.

http://img.photobucket.com/albums/v232/RogueTorino/braidedpsline.jpg (http://smg.photobucket.com/albums/v232/RogueTorino/?action=view&current=braidedpsline.jpg)
jspec240
03-16-2008, 12:19 PM
Yea the big banjo bolt with the fulid pasage that requires 2 crush washers....

I see what your talking about now tho. I thought the bolt on the ebay one went directly into the pump. but you would still need the banjo bolt to hook it up like you said.
Rogue240sx
03-16-2008, 12:27 PM
there's 2 of those though. The one in the pump is bigger than the one that holds the hose on. It frustrating, I wish they just used the same bolt for both parts.
Sr20det>Ka24de
03-16-2008, 12:46 PM
there's 2 of those though. The one in the pump is bigger than the one that holds the hose on. It frustrating, I wish they just used the same bolt for both parts.

I looked at work in my spare parts/junk had the right size for the line but not for the pump- (work as a tech for nissan) Good to hear you got a bolt on the way