seven.62
03-14-2008, 02:55 PM
i have a 96 240sx for sale. This car was built to perform day in and out. very reliable no problems what so ever.
specs:
vin:jn1as44d2sw010230
JDM kouki s14 sr20det swap with about 25k on it with perfect compression numbers in all cylnders
koyo radiator
samco hoses
new garrett 28r turbo
stainless turbo lines with an fittings
new turbo manifold
z32 mass air flow
hks ssqv blow off valve
550cc sard injectors
yashio factory radiator cap(higher pressure)
yashio facotry drift knob
cusco zero 2r coil overs (top of line coils $2,200)
spl ver 2 tension rods
tein inner tie rods
tein outer tie rods
apexi safc 2
cusco motor mounts
power enterprise boost controller/ boost gauge
essential rom tune (for gt28r and 550cc and z32 maf)
full turbo back exhaust
apexi gt spec exhaust 3 1/4"
apexi gt spec down pipe 3 1/4"
kazz 2 way lsd
solid aluminum subframe mounts
nismo steering rack bushings
ssr vienna kris wheels 18x9 +11, 18x10+6 3pc forged aluminum wheels 3 3/4 lip & 4 1/2 lip in rear wheels sit perfectly flush!
full 6pt auto power roll cage(scca and formula d legal)bolt in so it is removable
sparco 3" 6pt harness for driver
sparco 4pt harness for passenger
thrash garage racing seats driver has halo for helmet, passenger is regular bucket(passenger seat not installed but has rails and is included in sale)
new carpet
new dash
nrg 350mm suade steering wheel
255lph walbro fuel pump
clean title
car could use a better tune, but was dynoed at 280hp and 300tq, with high 10's, low 11's afr's with better ignition map and less fuel will easily do over 300hp and run trouble free for a very long time, i built this car to be very reliable and preform day in and out. You can bring this car to the track and not worry about not making it home. even without a new tune car runs great and is really fast and makes full boost at around 2600 rpm with the manifold and turbo combination. (very responsive, makes for very fast street car..300hp and 300tq to the wheels in a very light small car)
car should easily run a high 12 1/4 on existing tune, mid 12 with better tune, Ws6's and un modded to lightly modded ls1 cars are easy prey.
I am selling because i am back in school full time and working and i dont have time to bring it to any events or track meets now.
only thing this car needs is paint.
i also have other things for the car like extra gaskets, parts,..etc that will go along with the car.
i do have the front bumper just not on in pics to show intercooler.
any questions please feel free to ask [email protected]
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01948.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01950.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01947.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01943.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01952.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01960.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01958.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01957.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01956.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01955.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01954.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/wheels005.jpg
i know this frp hood isnt the best quality but i do have the oem hood and bumper
specs:
vin:jn1as44d2sw010230
JDM kouki s14 sr20det swap with about 25k on it with perfect compression numbers in all cylnders
koyo radiator
samco hoses
new garrett 28r turbo
stainless turbo lines with an fittings
new turbo manifold
z32 mass air flow
hks ssqv blow off valve
550cc sard injectors
yashio factory radiator cap(higher pressure)
yashio facotry drift knob
cusco zero 2r coil overs (top of line coils $2,200)
spl ver 2 tension rods
tein inner tie rods
tein outer tie rods
apexi safc 2
cusco motor mounts
power enterprise boost controller/ boost gauge
essential rom tune (for gt28r and 550cc and z32 maf)
full turbo back exhaust
apexi gt spec exhaust 3 1/4"
apexi gt spec down pipe 3 1/4"
kazz 2 way lsd
solid aluminum subframe mounts
nismo steering rack bushings
ssr vienna kris wheels 18x9 +11, 18x10+6 3pc forged aluminum wheels 3 3/4 lip & 4 1/2 lip in rear wheels sit perfectly flush!
full 6pt auto power roll cage(scca and formula d legal)bolt in so it is removable
sparco 3" 6pt harness for driver
sparco 4pt harness for passenger
thrash garage racing seats driver has halo for helmet, passenger is regular bucket(passenger seat not installed but has rails and is included in sale)
new carpet
new dash
nrg 350mm suade steering wheel
255lph walbro fuel pump
clean title
car could use a better tune, but was dynoed at 280hp and 300tq, with high 10's, low 11's afr's with better ignition map and less fuel will easily do over 300hp and run trouble free for a very long time, i built this car to be very reliable and preform day in and out. You can bring this car to the track and not worry about not making it home. even without a new tune car runs great and is really fast and makes full boost at around 2600 rpm with the manifold and turbo combination. (very responsive, makes for very fast street car..300hp and 300tq to the wheels in a very light small car)
car should easily run a high 12 1/4 on existing tune, mid 12 with better tune, Ws6's and un modded to lightly modded ls1 cars are easy prey.
I am selling because i am back in school full time and working and i dont have time to bring it to any events or track meets now.
only thing this car needs is paint.
i also have other things for the car like extra gaskets, parts,..etc that will go along with the car.
i do have the front bumper just not on in pics to show intercooler.
any questions please feel free to ask [email protected]
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01948.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01950.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01947.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01943.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01952.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01960.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01958.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01957.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01956.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01955.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/DSC01954.jpg
http://i144.photobucket.com/albums/r185/sevenpt62/wheels005.jpg
i know this frp hood isnt the best quality but i do have the oem hood and bumper