pegasus projector housings

[TURBRO2]

brand new never installed pegasus projector housing (comes with h7 bulb, low beam only)- these are like modern projectors and have cut off lines, unlike cheap ebay glass projectors these actually work very well, these are the non angel eye version and usually run $198- will fit about anything with these square housings- $150 shipped firm- sold



thanks

charles
located in sacramento/ san francisco bay area



http://i2.photobucket.com/albums/y32/racersharp925/for%20sale/fall07021.jpg
http://i2.photobucket.com/albums/y32/racersharp925/for%20sale/fall07023.jpg


example of light output
http://norcalmr2.com/pegasus/
http://norcalmr2.com/pegasus/index-Images/81.jpg

[Neejay]

How would these convert to a H4 harness?

[FaLKoN240]

They don't convert over to H4, they're single filament.

I was thinking about buying these from the original manufacturer, but there is no way to get a highbeam, and I don't like the option of losing high beam on my daily.

[Neejay]

They don't convert over to H4, they're single filament.

I was thinking about buying these from the original manufacturer, but there is no way to get a highbeam, and I don't like the option of losing high beam on my daily.

Ah, ok. I get it now, thanks. And yeah, that's the only thing keeping me from buying them...bah...

[SinisterSntra91]

It looks to me like you could modify a H3 bulb to fit the H7 socket, but Im not sure how well the high beam will work in a projector housing...

[TURBRO2]

ya they are unfortunately only low beam, but man these things are bright even with just the standard h7. If you upgrade to hid's these things are very bright. I've seen people add another h7 bulb at the bottom of the housing so it disburses a secondary scattered light, so that its a high beam.

[Bushido]

They don't convert over to H4, they're single filament.

I was thinking about buying these from the original manufacturer, but there is no way to get a highbeam, and I don't like the option of losing high beam on my daily.


the 240 in your sig has auxillary lights, why not set those up to work as high beams?

[importdude]

How would these convert to a H4 harness?

you can repin the 9007 plug to work for a h4

all it is IS
ground
LOWbeam trigger
highbeam trigger

so u dont use the highbeam trigger anymore

depin the connectors
and buy a 9007 connector harness
then pin into the 9007 harness

[ryceboy_124]

I may just pick these up from you if you have them by next week...payday isnt till next week. :(

[TURBRO2]

installing these on an mr2 and a 240 are the same, each housing comes has 2 wires comming out of it. Each wire has a male blade connector where one goes they go into the car harness plug which is female. One wire goes into the ground and the other goes into the low beam socket.

[TURBRO2]

item just sold