Name that intercooler piping (hot or cold?) PLEASE!!!

[gotta240]

Ok, so i the guy threw in some IC piping with my sr20. He said that SOME of it was missing. I THINK he said the hot side was missing, but now that i'm looking at what he gave me, i'm all confused. :ugh:

Can you please name the piping i have, and let me know what piping i NEED to complete the FMIC set-up?


Thanks a lot guys.

http://i112.photobucket.com/albums/n169/mrmikeman/IMG_4944.jpg

http://i112.photobucket.com/albums/n169/mrmikeman/IMG_4939.jpg

[Kouki]

Looks like it's all there to me, In the second pic, from left to right looks like:
1. Cold pipe from throttle body down
2. lower cold pipe from upper pipe to intercooler
3. lower hot-pipe from intercooler to upper
4. hot pipe from lower to turbo

Looks like all you need is maybe a few more couplers and clamps?

[blu808]

You have a really hairy arm.

Looks like you are missing the cast aluminum 90 deg elbow.


O yea thats s14 sr piping.

[gotta240]

Kouki- What is the black pipe for then?

blu808- The piping came from an s13 in japan and it says blitz rps13 on it. With that being said, will i have any trouble using it on my S14?

Thanks a TON you guys. Repped.

[Kouki]

The black pipe appears to be part of the upper hot pipe, connecting from the lower pipe, to the shiny pipe with the bov. The intercooler kit isn't chassis specific, but engine specific. Is the engine a s13sr or s14sr?

[Mlogue84]

I completely agree

Looks like it's all there to me, In the second pic, from right to left looks like:
1. Cold pipe from throttle body down
2. lower cold pipe from upper pipe to intercooler
3. lower hot-pipe from intercooler to upper
4. hot pipe from lower to turbo

Looks like all you need is maybe a few more couplers and clamps?

[Kouki]

Shit, I fucked up my first post, I meant to say from left to right. I'll change that right now. :rolleyes:

[gotta240]

The engine is s13, and chassis is s14. (blitz FMIC if it matters at all)

[Kouki]

S13 engine uses s13 intercooler kit, regardless of chassis, s13, s14, etc, the difference being the throttle body location, and turbo outlet.

[gotta240]

Great!!! Thanks again. Your quick imput was a HUGE help(and relief!)

[Kouki]

Well if I was wrong, you will find out when you start putting it on, then you won't be so thankful :hammer:


:bigok:

[gotta240]

haha. I think i'll be ok. Sounds like you know what your talking about.

[Kouki]

Also I'd probably recomend getting a different 2" 1-piece upper hotpipe, that one you've got there looks tiny, but maybe that's because it's next to the 3" piping, but it only looks like it's like 1.5"

[blu808]

well those are most def s14 piping. or maybe s13 with a greddy intake manifold.

[gotta240]

haha. DAMN...good call. S13 with greddy IM.