Z32 Maf wiring Troubles

[fattony]

Hey guys this is my first 240 with an SR and I had some q I just put on a Z32 Maf and was curious about grounding the Maf does it have to be grounded to the chassis or can it be grounded to the block? I ask because the car now only runs in safe mode and wont rev above 2500. The z32 maf that was on the car causes the car to sputter and die. I borrowed a friends brand new maf and the car sputters but then runs fine I tried to drive it but it died? so now I tring to figure out why my car is diying. The maf is grounded throught the engine harness, while I heard Im supposed to ground it to the chassis not sure.

Thanks
Tony

[sliddinsil8o]

is the ecu tuned for a z32 maf?
and are u sure that its wired up correctly?

[fattony]

yeah it has a ephipany tuned ecu(I cant spell) The previous owner said, but not a 100% sure? and not sure if its wired up correctly I searched and found a variety of ways to wire the maf let me know if this is correct

A Nothing
B White
C Black
D Nothing
E Black w/White stripe
F nothing

also which is the ground I will probably redo the maf wiring.

Thanks
Tony

[SILVIA_KIDs14.5]

http://jimwolftechnology.com/wolfpdf/MAF%20Z32%20CONVERT%20TO%20OTHER%20NISSANS.PDF (http://jimwolftechnology.com/wolfpdf/MAF%20Z32%20CONVERT%20TO%20OTHER%20NISSANS.PDF)
enough said letter D should be hooked into ground this diagram works. worked for me when i hooked up mine
hope it helps

[FaLKoN240]

I was just about to link the the JWT image.

[fattony]

this is why i love forums, you all are F ing awsome.

Thanks
Tony

[bloodangels13]

NOOB! jus kidding bring down to the garage thurs and we'll take a look at it .... talk to pops about adjusting your ideal on the ls1 7

Age: 27 my ass...