s13 rear ball joints??

[dori_sil8t]

i have heard of ppl using 13b sentra front ball joints for the rear. does this work? if so what needs to be done? cuz my rear is getting loss:ughd:

[punxva]

Front B13 Sentra ball joints fit the rear S13 LCAs.

stock on the left, b13 on the right
http://img.photobucket.com/albums/v374/sockington/240sx/aug23/02.jpg

[garagelu]

why would you buy a ball joint for a sentra when you have a 240sx? You can buy replacement ball joints from any parts store. Just go buy moog or trw ball joints.

[dori_sil8t]

cuz its the whole control arm. i know cuz i work at a part store actually im typing as i work.

thanks punxva
plus do you know if they slide right in or do you need to take abit off the control arm

[LoanShark]

actually, B13 is 1mm too big.

89 Sentra front balljoint is a direct replacement.

[dori_sil8t]

ok good cuz i have em at my work for 38 bucks in moog.
thanks for looking out guys

[punxva]

well the ball is 1mm larger on the B13, but the shank and threads match.

here's an entire thread on this...

http://www.zilvia.net/f/showthread.php?t=135918&highlight=b13+ball+joint

[projectRDM]

why would you buy a ball joint for a sentra when you have a 240sx? You can buy replacement ball joints from any parts store. Just go buy moog or trw ball joints.

Not for the rear, they're not available. Pay attention please.

[dori_sil8t]

my moog part number is k9633
whereas the moog number listed here is a k9449
is the difference just the 1mm ? or is the shank shorter???

[punxva]

shank is the same...

[dori_sil8t]

ok sounds good... thanks for the help

[slow40sx]

actually, B13 is 1mm too big.

89 Sentra front balljoint is a direct replacement.

89 balljoints are a direct replacement???

[dori_sil8t]

for the rear only.

[slow40sx]

for the rear only.

sweet thanks