Crab Spirits
10-28-2002, 06:46 PM
This is a fairly complete RHD conversion set for S13 off my Silvia clip. The clip has HICAS and auto HVAC. Parts that are missing to the best of my knowledge:
gauge cluster
Ignition and glovebox keys
bottom panel under steering column
foglight switch (shouldn't matter if you're using flip up lights)
throttle pedal and cable (could use U.S. parts?)
brake lines
http://members.aol.com/movistar323/images/rhd1.jpg
http://members.aol.com/movistar323/images/rhd2.jpg
The dashboard is faded and is in rough, but usable shape. There are 3 screw holes where gauges were mounted, the area above the gauges is slightly cracked from the sun, and there are cut marks on each side from a saw where the pillars were cut. The damage to the dash looks repairable. The console piece around the shifter was repainted poorly. You could sand and repaint it. The glovebox is dirty and has a snag in the material. Anyone willing to do a little work could make these parts look new. The HVAC head unit has a small crack above where it says "auto" but appears to be intact.
As far as I know, I have anything else you would need. If requested, I can cut the column support from the firewall too.
I am asking $190. I would prefer a local pickup (LaGrange, IL , but I will ship this stuff for $65. Email me at [email protected] for any questions.
<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/dozingoff.gif" border="0" valign="absmiddle" alt=':zzz:'>
gauge cluster
Ignition and glovebox keys
bottom panel under steering column
foglight switch (shouldn't matter if you're using flip up lights)
throttle pedal and cable (could use U.S. parts?)
brake lines
http://members.aol.com/movistar323/images/rhd1.jpg
http://members.aol.com/movistar323/images/rhd2.jpg
The dashboard is faded and is in rough, but usable shape. There are 3 screw holes where gauges were mounted, the area above the gauges is slightly cracked from the sun, and there are cut marks on each side from a saw where the pillars were cut. The damage to the dash looks repairable. The console piece around the shifter was repainted poorly. You could sand and repaint it. The glovebox is dirty and has a snag in the material. Anyone willing to do a little work could make these parts look new. The HVAC head unit has a small crack above where it says "auto" but appears to be intact.
As far as I know, I have anything else you would need. If requested, I can cut the column support from the firewall too.
I am asking $190. I would prefer a local pickup (LaGrange, IL , but I will ship this stuff for $65. Email me at [email protected] for any questions.
<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/dozingoff.gif" border="0" valign="absmiddle" alt=':zzz:'>