nelson8708
03-05-2008, 05:25 AM
I am selling my old turbo kit. It has been on my car with no problems for 1.5 years. For some weird reason it runs 2psi and this is the second wastegate i have swapped onto it so there was probably a leak in the line or something. I didnt care because you dont have ot worry about blowing shit up on 2psi and i still ran a 14.8 at 93mph. If you put a mbc on it and turn it to zero it will run 7psi. http://www.240sxforums.com/forums/images/smilies/aaadunno.gif The turbo has very little play side to side and zero in and out. I made the down pipe with a flux core welder so there are probably little pin holes all over it. Its not pretty but it works. Also it doesnt connect to the exhaust...it just a open down pipe. I will include the feed line since i dont need it anyway. You will need to buy a flare fitting to use it though. My oil pressure sensor thread were messed up so i had to drill and tap it to a differnt size. You can get the flare from most fitting stores. I got mine from earl's lines for 6$. Anyway here are a few pics. If you are interested in it your best bet is to email me at [email protected] ([email protected]) .....Price is 300$+shipping..OBO(turbo, feed line, manifold, down pipe)
http://i26.tinypic.com/1498l7m.jpg
http://i30.tinypic.com/2rx9lp2.jpg
http://i32.tinypic.com/2ufauk0.jpg
http://i28.tinypic.com/zwlqiq.jpg
http://i30.tinypic.com/2a0nlsw.jpg
I am cutting off the flange on the bottom of the down pipe...i need it.
http://i28.tinypic.com/11imw0i.jpg
http://i26.tinypic.com/1498l7m.jpg
http://i30.tinypic.com/2rx9lp2.jpg
http://i32.tinypic.com/2ufauk0.jpg
http://i28.tinypic.com/zwlqiq.jpg
http://i30.tinypic.com/2a0nlsw.jpg
I am cutting off the flange on the bottom of the down pipe...i need it.
http://i28.tinypic.com/11imw0i.jpg