View Full Version : Silvia power folding mirrors
mixedwell
10-28-2002, 03:11 PM
hey everyone! i finally bought my JDM cluster wiht the HUD! and it works! how fun. anyway yes i already had the HUD but it went out so i just replaced it after finding out my yellow/green wire was bad (it was to the speedometer). Yeah anyway before my ADD kicks in again.... has anyone done the Silvia power folding mirrors? i got them free with my guage cluster and it has everything ... the mirrors w the motors in them, the switch for it... and the wires connected to these mirrors... bla bla bla you know ... so whos done it? whats there to do? and how hard is it? i need your help!
thanks everyone!
Silvia... my love <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'>
nismo270r
10-29-2002, 12:03 AM
I did the power folding mirrors on my S14...Pretty straight forward swap. You basically tap into the wires going into your existing switch with the wires from the harness of the new switch. There should be one extra wire on the new switch's harness. That is the wire that controls the folding option. You will have to run two new wires (one to each mirror) and those two new wires will be connected to that single extra wire in the new harness. The rest of the wires should match up with the wires from your old mirrors' wiring harness in the doors. That is if you had power mirrors to begin with...If not, you've got quite the install ahead of you. If you've got any questions you can drop me an email...
mixedwell
10-29-2002, 02:13 AM
hey cool i sent you an email wiht my junkie question! hey thanks for your help. but how do i hook it up to my alarm? fcuk man! this is gonna be sooo cool! hehe <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/cool.gif" border="0" valign="absmiddle" alt=':cool:'>
SIlvia... my love <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/inlove.gif" border="0" valign="absmiddle" alt=':love:'>
gschroeder78
10-29-2002, 05:28 AM
The mirrors will be at the wrong angle for LHD. You should probably swap the housings.
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.