PDA

View Full Version : FS ARC airbox for S13


Rittmeister
03-01-2008, 03:59 PM
As title states. A gin-u-wine JDM Abbey Road Company aluminum airbox for S13 with SR20DET. for those that don't know this bolts to the stock MAF and rubber intake tube.

It's in excellent condition. The picture shows it with water spots but it's all cleaned up and sprayed with several coats of hi-temp silver (aluminum, actually) and two coats of hi-temp clear. It looks quite good as is but the buyer could easily strip and polish or powdercoat it.

The six small hex-bolts for the filter retaining ring are included but you'll have to use your stock MAF bolts to attach to the MAF. The velocity stack is included as well, as is a real K&N cleanable panel filter which was in the car for about 18 months with the airbox, and is in excellent condition. The car isn't my daily so it hasn't seen hard use.

I'm selling for several reasons; first, I went to a solid intake tube and while I'm convinced it could be made to work with the box (and that was my original plan) it's going to take much more effort than I have time for right now. Second, I'm considering an upgrade to a T28 with larger injectors and a Z32 MAF - and the Z MAF won't work with this box. Finally and most importantly I need to pay for some continuing education in my field, and I need the cash.

Based on the condition and the prices I see on Ebay and here, I'm setting the price at $160 shipped which is negotiable but not low-ballable. These are over $300 new, and the K&N filter was $45.

http://i25.photobucket.com/albums/c88/kwstine1/P7310006.jpg

I also have a Greddy Speed Limiter Cut for Nissans. $60 shipped. If someone wants both items I'll sell for $200 shipped total, FIRM.

Thanks!

Wangan kid
03-01-2008, 04:16 PM
good deal G/L w sale

sillyvia13
03-01-2008, 06:32 PM
pm'd you...
lmk

BlackZenkiS14
03-01-2008, 08:22 PM
I've always wanted one of these, but im not sure about the flow ratings of it.

Does anyone have any actualy data for this ARC box compared to an Apex or Blitz SUS filter? Thanks....

Jspec603
03-01-2008, 08:29 PM
^One would 'assume' that it would flow the same if not more. I mean your basicly bolting the MAF to the rear of the box and allowing the entire surface area of the filter to allow air entry. On the plus side, with this box you could 'assume' you would be getting cooler air. Seeing that you would be pulling air from the front and not from all directions like a cone filter. Either way the bottom line is your still pulling the hot air from the engine bay.

BlackZenkiS14
03-01-2008, 08:40 PM
Yea, just assuming its ARC would lead me to believe that it flows better than your average piece. Another question then, if i have an S13 Redtop in my S14, what would it take to make this work for my car?

Rittmeister
03-02-2008, 09:05 PM
ARC box is SOLD.

SLC still available, make offers.