Turbo setup rom tune and various stuff for sale!

[Dousan_PG]

OK got my new setup going on shortly. prices are obo unless noted.


im not struggling for money at the moment, so dont waste my time please. thanks



so here we go:

Enthalpy Rom tune. S14 Sr20det, WC ecu
tuned for:
105 octane, 256/264 cams, t3/to4e turbo, 740cc injectors, 8k rpm redline, 9:1 compression engine
$350 firm

t3/to4e turbo turbonetics (T3 flange, 3" compressor inlet)
more about this turbo, I built it myself for Aaron. It's a non-production unit, basically a prototype turbine wheel in it. It's equivalent to a stage 2 turbine wheel but with GT style blade design. The compresor is a T04E - 50 trim if I recall, and it's ceramic ball bearing center section.
oil cooled only
$500

z32 Mafs and tomei plug
$170

painless switch panel
$120

intake pipe, 3" long enough to put z32 out to not cause problems
aluminum and -10 bung for whatever u want. vacuum
$50

greddy RS bov (i can include flange too on my ic piping but you better get a new greddy flange!!)
$100 bucks

s14 SR20det intake manifold. POLISHED. baller!
$50 dollars


i also have the stock SR20det throttle body, 20 bucks.


heres a pic of everything but the rom tune.

http://i29.photobucket.com/albums/c252/dousan/new%20s13/010108025.jpg


i think thats it.


should be ready by this weekend or next. local pick up PREFERRED but iwill ship most everything. nothing here is too big to ship!


-Aaron

[!Zar!]

I'm surprised nobody is jumping on this stuff.

Baller baller!

Oh wait. It's zilvia... Home of primered buckets. Mmm.

Good luck mang!

[lordofthemiasma]

INfo on the painless wiring switch panel. pics? how many switches? fused or no? pm me very interested.

[bigOdom1]

i know you hate shipping but you willing to ship? is it the stock intake plenum just polished?

[Z33dori]

is the turbo 500 bucks....

how much shipped

[mehsilvia]

PM'd ya Aaron

[Dousan_PG]

shipping for the turbo
add 20 bucks
that covers great packng suppies and a nice box
USPS priority mail w/ conf/insurance.

painless is the SWITCH PANEL ONLY
no fuses on it
u need the fuse part.
im keeping that to wire into my stock stuff.
its a 6 panel switch setup
starter, ignition ON/OFF, fuel pump prime/off/on, accessorie 1/off/2, accessory on, accesory on

[bigOdom1]

so is that a stock plenum? just polished

[Dousan_PG]

yeah and looks to be sold to MEHSilvia.

[kafanylovesme]

How much whp were you pushing with that turbo setup?

[Dousan_PG]

350 whp
on that one.

[kafanylovesme]

Alright cool thanks. What's the max on it?

[Dousan_PG]

mark said like 400something iirc

[ellisonrox]

free bump cuz i just bought something off you last night :bigok:

[lordofthemiasma]

ship the bov to me for 100 and its sold.

[Dousan_PG]

ship the bov to me for 100 and its sold.



how about ...


no.

[!Zar!]

How about five bucks and a Charleston Chew?

[Inlandsilvia]

is the intake mainfold sold?

[TougeLabs]

interested in selling off the intake setup ?

[TougeLabs]

Sorry free bump for my stupidity...I will take the intake setup.
Wanna throw the braided line and the other fitting for a few more bucks ?

[Dousan_PG]

i wont sell the lines
AN shit is WAY expsnive and i can reuise it
the filter is trash i threw that away
so ur just looking at a intake pipe (ill measure diameter) w/ a -10 male fitting on it.
ill throw in the silicone couplings and clamps and a maxima adapter for a z32 filter (whichis what i have,all in that pic)

ill take a pic shortly in a bit. gotta go work on the car..


YES intake mani was sold to MEHSILVIA.
thanks chris!

[TougeLabs]

let me know...thanks

[lordofthemiasma]

how about ...


no.
you are kidding me right. says obo and wtf do you think shipping will be? $4.00. get a shipping quote and ill give you shipping on top. jeez.

[Dousan_PG]

actually i dont want to sell it to you anymore.
im done with you. thanks for palying.




and im sick of the pms for the painless i should have osted this sooner
this is the one im selling but obvoisly its used because its on my car

http://store.summitracing.com/partdetail.asp?autofilter=1&part=PRF%2D50406&N=700+400012+115&autoview=sku

[Dousan_PG]

pics:
maxima adapter for z32 mafs
http://i29.photobucket.com/albums/c252/dousan/forsale/forsale013.jpg

silicone couplings. yes ill clean when i sell them. tbolts arent for sale
http://i29.photobucket.com/albums/c252/dousan/forsale/forsale011.jpg

z32 mafs
http://i29.photobucket.com/albums/c252/dousan/forsale/forsale010.jpg

http://i29.photobucket.com/albums/c252/dousan/forsale/forsale009.jpg

WC s14 zenki ecu w/ rom tune ENTHALPY
http://i29.photobucket.com/albums/c252/dousan/forsale/forsale008.jpg

intake pipe for turbo
http://i29.photobucket.com/albums/c252/dousan/forsale/forsale003.jpg


also for sale:
60 bucks
oem Kouki 180sx poistion markers
http://i29.photobucket.com/albums/c252/dousan/forsale/forsale002.jpg

50 bucks
s13 oem chuuki turn signals/position markers
http://i29.photobucket.com/albums/c252/dousan/forsale/forsale001.jpg

[Inland180]

Pmed! let me know!

[lordofthemiasma]

[quote=Dousan_PG;1870994]actually i dont want to sell it to you anymore.
im done with you. thanks for palying.



wow you are an ultra douche bag, you posted 100 obo. and i offered you 95 plus shipping, and you got pissed. holy fuck dude let ur nuts drop.

[lordofthemiasma]

and for the ppl who neg repped me, thnx read through the thread, i did offer to pay the ultra douche 5 more dollars for shipping.

[Avante]

Aaron, is the z32 maf with plugs will available?

[cfrost]

are these pictures taken on the back of a toilet?

if so i'll buy EVERYTHING

good luck with the sales amigo :love:

[Dousan_PG]

yes i can pull the plug off this weekend, its still on the car, but i can clip it this weekend for yoU!

haha
nah taken on my clothes hamper! dirty clothes time!

[weagle]

Did you sell the turbo?

How many miles on it? rough estimate is ok

Gonna guess it is polished since you only posted one picture of the underhood.

[blu808]

Bump for a good seller.

[Dousan_PG]

id say about a 1,000 or so miles
it was track only
not on street! yeah its polished.

no its not sold yet.

[sideview_180sx]

turbo is awesome setup made by slide squad mark thru turbonetics. "equivalent to a stage 2 turbine wheel but with GT style blade design. The compresor is a T04E - 50 trim and ceramic ball bearing center section"

[Dousan_PG]

turbo sold tomrorow
mafs is sold
intake mani sold
ecu is sold
kouki markers are sold


all thats really left is the chuuki lights
the painless panel

and thats about it it hink..
and im still poor. wtf.