Power Enterprise B-A-N-A-N-A-S

[MA JasonG]

We have a shipment thats arriving. Here is what we have available.

Power enterprise head gaskets.

-87mm 1.1 thickness - $177
-87mm 1.5 thickness - $177
-88mm 1.1 thickness - $177
-88mm 1.5 thickness - $177
http://www.powerenterpriseusa.net/products/engine/gasket/images/SR20det.jpg
http://www.powerenterpriseusa.net/products/engine/gasket/images/wrc-spec%20gasket.jpg


-PE1420SP Turbo Kit (PS13・RPS13) - retail is $1660, your cost $1245
http://www.powerenterpriseusa.net/products/turbo/nissan/ps13/images/13turbo.jpg

-550cc Injectors - $492
-660cc Injectors - $812
-850cc Injectors - $462
http://www.powerenterpriseusa.net/products/fuel/injector/images/injector.jpg

-S13/S14 Radiator + hose set - $685.30

If you have any questions feel free to pm me. thanks guys

[dorkidori_s13]

specs on turbo kit please (A/R siz, top or bottom mount, etc)

[MA JasonG]

I will find out for you tomorrow.

[azndoc]

why such a big price difference for the 660cc injector?

or is that a mistake?

[GSXRJJordan]

Oh snap!!! Power Enterprise is legit!!

Power Enterprise head gaskets are on the same level as HKS/Tomei/Apexi ~ good stuff!

[vtrdcamry2000ce]

Do They Offer The Head Gasket For The Ka??

[MA JasonG]

Do They Offer The Head Gasket For The Ka??

Dont have anything for the KA sorry. Only Cometic. We are working on getting something.

[MA JasonG]

why such a big price difference for the 660cc injector?

or is that a mistake?

I dont know. I asked them the same and they said that high of a price. didnt make sense.

[MA JasonG]

specs on turbo kit please (A/R siz, top or bottom mount, etc)

PE1420
Compressor wheel
ID 45.5mm, OD 60.0mm
# of blades 6＋6
Turbine Wheel
OD 48mm
Ex wheel Diameter 44.0mm
# of blades 8
Turbine wheel design : slanted-flow
Center shaft : ball Bearings
Waste gate ID 23.0mm
PE1420 (Rated [email protected]/cm2-5700 rpm, [email protected]/cm2-6300 rpm)

[Brian W.]

PE1420
Compressor wheel
ID 45.5mm, OD 60.0mm
# of blades 6＋6
Turbine Wheel
OD 48mm
Ex wheel Diameter 44.0mm
# of blades 8
Turbine wheel design : slanted-flow
Center shaft : ball Bearings
Waste gate ID 23.0mm
PE1420 (Rated [email protected]/cm2-5700 rpm, [email protected]/cm2-6300 rpm)

The turbo is a bottom mount factory replacement. It bolts right in and comes with everything you need. For that price it is way cheaper than buying a GT2860RS with, lines and making your pipes work. This turbo spools fast and hits hard. We tuned one a few months back and it was super fun to drive.

[dorkidori_s13]

The turbo is a bottom mount factory replacement. It bolts right in and comes with everything you need. For that price it is way cheaper than buying a GT2860RS with, lines and making your pipes work. This turbo spools fast and hits hard. We tuned one a few months back and it was super fun to drive.

whast the max this turbo puts out? around 350?

[Brian W.]

yep.... abotu 350whp depending on the dyno.

[MA JasonG]

Just a reminder guys. These headgaskets are top of the line. They are rated to hold 1400hp. These are probably the best you can get on the market.

[GSXRJJordan]

Just a reminder guys. These headgaskets are top of the line. They are rated to hold 1400hp. These are probably the best you can get on the market.

Quoted for troof. Serious business, Cometic price.

[808DRFTR]

Headgaskets in yet, 87MM 1.1? price is shipped?

[MeSs]

I need plugs/pigtails for power enterprise 1000cc injectors? pm me

[MA JasonG]

both should have pm's

[808DRFTR]

no pm yet...