WTF: Powersteering help..please(PICS)

[rb25jun]

so turns out i have a bad hicas pump.. so i went and got a regular sr pump but there are a few things wrong.. i already know that i have to shave the back of the pump to fit the bracket.

i have a 97 with a sr20 (s13)

:bash:

do i need to use the fitting that fits in between the actual line and pump.

one... the banjo bolt doesnt fit.. its to small for the sr pump.. but fits fine on the hicas pump.. here are some pics.. someone explain please.

http://i171.photobucket.com/albums/u306/rb25jun/IMG_0281.jpg
pump all the way to the right is hicas.. the other are sr and ka.

http://i171.photobucket.com/albums/u306/rb25jun/IMG_0284.jpg
banjo bolt fits fine on the hicas pump.

http://i171.photobucket.com/albums/u306/rb25jun/IMG_0285.jpg
http://i171.photobucket.com/albums/u306/rb25jun/IMG_0286.jpg
but on the sr pump above the banjo bolt just falls right in.. loose and yeah..

[cotbu]

Finish dismantling the pump, there's another fitting on the hicas pump that the banjo bolt threads into, hence the hex shaped nut thing. (pressure fitting thing) Your second picture, bolt that to the non hicas pump, then the banjo bolt should fit.

[downshift_sideways]

^I was just about to say that.
Looks like you still need to unscrew a few more jam nuts.

Why didn't you just get another hicas ps pump?

[GSXRJJordan]

The banjo bolt on the SR pump goes into a huge 90* adapter, which uses another banjo bolt that contains the pressure "ball and spring" thing. Like they said, you're missin parts.

[rb25jun]

http://i171.photobucket.com/albums/u306/rb25jun/IMG_028422222222.jpg

the part in yellow is what i need to take off and i should be fine..???
second someone show me a picture of the 90 degree thing??

thanks everyone