New HKS wastegates/actuators

[hotlavaflow]

***BOTH SOLD THANKS***

I have two HKS actuators I need to get rid of. I'm looking for $75 each. They are $100 new so you can save $25.

I bought these for my twin turbo but I didn't install them. So they are just sitting around doing nothing.

These are adjustable for T28s but will also fit T25 turbos.

PART #17230-015100

Adjustable up to 1bar.

http://img.photobucket.com/albums/v629/hotlavaflow/hks1.jpg
http://img.photobucket.com/albums/v629/hotlavaflow/hks3.jpg
http://img.photobucket.com/albums/v629/hotlavaflow/hks4.jpg

[fwuffy squirrel]

How can you tell if your stock wastegate is working? If mine is broken (I really think it is because my friend was like forcing it with his hands) then ill take one of these off your hands.

[boogerlovers]

whats the spring rate on these...? i googled the part number and didnt get anything, i also put it on hks' website and didnt get anything...

[louisdaboois]

pm'd you sir

[SHIFT_*grind*]

whats the spring rate on these...? i googled the part number and didnt get anything, i also put it on hks' website and didnt get anything...

It's adjustable. Lengthen or shorten the rod to decrease or increase the tension, respectively.

[hotlavaflow]

How can you tell if your stock wastegate is working? If mine is broken (I really think it is because my friend was like forcing it with his hands) then ill take one of these off your hands.

Sounds like you have a stuck wastegate. I'm not an expert on internal wastegates and don't know what kind you have but it should be able to be opened by hand.


whats the spring rate on these...? i googled the part number and didnt get anything, i also put it on hks' website and didnt get anything...


By the way this is the exact wastegate that FRsport sells for those of you looking for a reference.
http://cgi.ebay.com/ebaymotors/HKS-ADJ-TURBO-WASTEGATE-ACTUATOR-S14-S15-SR20DET-GT-T28_W0QQcmdZViewItemQQcategoryZ33742QQihZ001QQitem Z110171094089QQrdZ1QQsspagenameZWD1VQQtrksidZp1638 Q2em118Q2el1247

[louisdaboois]

How can you tell if your stock wastegate is working? If mine is broken (I really think it is because my friend was like forcing it with his hands) then ill take one of these off your hands.

actually, if you have it off of the turbo you should be able to pull on the shaft. cause basically the diaphram fills up with boost pressure and pushes the rod out at a certain psi, depending on the spring rate or the length of the shaft. the shaft is connected to the little flapper which initially remains closed until the actuator is pushed out letting the flap open. Depending on how far it opens controlls the amount of boost that goes throughout the ic piping and into the motor.

[hotlavaflow]

One left people get on it.

[louisdaboois]

just got mine in today, everythings legit. +1 for a good seller!

[hotlavaflow]

just got mine in today, everythings legit. +1 for a good seller!

Thanks I appreciate the rep.

I'm letting the last one go $75 shipped.

[ncognito]

Last one is mine, paypal sent!