DOHC chassis Harness?????

[insolentspike]

I have a quick question, i recently dropped in an sr into my 240 which had a DOHC ka24, turns out my chassis harness was nasty hacked by the previous owner and now my car wont turn on, so my good looking Sr Redtop is just sitting there =(, i found a good working SOHC chassis harness, would it work into my 240sx? would it be direct drop?
thanks

[kingston240]

yes the chassis harness will work, but you will have to change the plug under the dash by the glovebox that connects the egnine harness to the dash, the wires are in different spots, you just have to match the colors up.

-Matt

[burnsauto]

The colors on the wires that run from the ECU up into the dash matched up perfectly on both the SR ECU harness and the KA dash harness:

yellow/red stripe = tach signal

yellow/green stripe = speedo signal

orange = ignition start

black (may be more than one) = ground

blue/green stripe = AC signal

blue/black stripe = water temp signal

[insolentspike]

Great!!! Thanks alot for the help =)