clutch

[lazy240]

alright so me and my freind just put a clutch and flywheel on his car now the pedal feels like crap and it doesnt grab until the end of the pedal. i want to make the clutch feel better like the stock one i had in there before.

[nicku]

bleed the clutch

[slider2828]

second third and fourth that.... Also adjust the clutch play too... Not screws. one at the top and one at the bottom the pedal... Also clutch fork length

[importdude]

second third and fourth that.... Also adjust the clutch play too... Not screws. one at the top and one at the bottom the pedal... Also clutch fork length

how do you adjust clutch fork length?

[MrChow]

Get the FSM...
to OP did you get a new slave??

[louisdaboois]

Under the dash, where the clutch pedal is mounted, theres a thin shaft coming through the firewall. that is attached to the top of the clutch pedal by a 12mm nut. This thin shaft is connected to the clutch master cylinder on the other side of the firewall. Simply loosen the nut and turn the shaft clockwise iirc to raise where the clutch grabs. Turn the shaft about a 1/4 - 1/2 turn and check to see where it grabs. Continue doing so until you get your desired feeeeeeeeeeeeeeeeeeeeeeeeeel.

[lazy240]

no i did not get a new slave i will try some of these things and i will get back to you guys

[importdude]

Under the dash, where the clutch pedal is mounted, theres a thin shaft coming through the firewall. that is attached to the top of the clutch pedal by a 12mm nut. This thin shaft is connected to the clutch master cylinder on the other side of the firewall. Simply loosen the nut and turn the shaft clockwise iirc to raise where the clutch grabs. Turn the shaft about a 1/4 - 1/2 turn and check to see where it grabs. Continue doing so until you get your desired feeeeeeeeeeeeeeeeeeeeeeeeeel.

oh that one
mine is adjusted all the way out*longest*
...
i wonder if this is making me not fully disenage my clutch