View Full Version : SR20 DET will not fire. PLEASE HELP!!!!
landins13
02-08-2008, 04:33 PM
I finally finished getting my sr20 back together and into the car, and i am not get a spark at all, i took out the coils left the spark plug on grounded it and im not getting a spark at all.
Has anyone else had this happen?...( what was it)
or do you have any suggestions of what to check.
Thanks in advance.:sadwavey:
i need tires
02-08-2008, 04:35 PM
i had the same problem ended up being my ecu. but there can be many other problems. check ecu and ignitor.
Cedarcbr
02-08-2008, 04:35 PM
Check your ignitor? the wiring from the ecu to the coilpack connector, and from the connector to each coilpack.
duffman1278
02-08-2008, 05:01 PM
I also had this problem, ended up being my power source on the wiring harness. I believe it was a THICK black/ red stripe wire. I had the THIN black/red stripe wire.
Make sure you're getting power to your ignitor, and make sure the ignitor is working.
NIZzS13
02-08-2008, 05:05 PM
Check wiring, check ignitor, check ecu, check Cam sensor.
landins13
02-08-2008, 06:41 PM
does anybody know what the voltages should be for the coilpacks signal wire, also what the voltage should be for the CAS so that i can check it?
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.