FS: S13 part out - random parts

[808_Drift]

Ok well im just about to move to PA (tyrone) and i desided to part out my almost finished build :(
Im starting over with a s14 and gonna build a turbo ls1 this time around. If you have any questions PM is the easiest and quickest way to get ahold of me.
Engine:
Nissan CA18DET fully built - Weisco pistons over bore, Pauter rods with ARP bolts, Cometic metal head gaskit, 444 injectors, Spec stage 2+ clutch, new timing belt + tensioners, water pump, new crank bearings, new rod bearings (i also have a extra set of rod and crank bearings brand new in box i will throw in) All machine work was done by a top shop in germany (work done for pistons and head has undergone a overhaul... ported and polished, polished valves... ect) Also i will thro in a stage 3 chip if wanted. The chip is set for a z32 afm, 255 fuel pump, intake, full turboback exhaust, gt2871rs @1.2-1.3bar boost. I did assemble the engine but then found out i am moving back to the US so i desided to take it back apart (for cheaper shiping reasons) THIS ENGINE HAS 0 MILES ON IT since its rebuild!!! It hasnt even been started up. This is great for someone who wants to try something different then the KA/SR options out there and if you know the strong points the CA has. Painted valve covers. I do not have a tranny or ecu but i have seen trannys go for 200 on here and i can even help you find one or the housing if needed. This CA was built to be track drifted at high boost 1.5bar+ all day long and will handle anything you throw at it.
$2000 FIRM
http://i220.photobucket.com/albums/dd272/808drifter_2007/engine2.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/engine.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/head.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/head2.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/pistonsrods.jpg
http://a693.ac-images.myspacecdn.com/images01/85/l_45399b3a930602765062ec5e197f8774.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/bottommountmani.jpg
CA18DET bottom mount turbo manifold (pictured above)
-$75

Apexi GT spec exhaust (USED)
Used in good condition, small dent in the high flow res area due to my car being slammed to the ground :P but its very small and makes no impact on the exhast what so ever, Downpipe, and test pipe. $500 for all or make me an offer for seperate pieces.
http://i220.photobucket.com/albums/dd272/808drifter_2007/exhaust.jpg
Garret GT2871rs .64 ar (Brand new)
I no longer have the box as my friend stole it to ship out some parts he sold :tdown lol, but it is brand new never been used has seen 0 MILES!
$900 FIRM
http://i220.photobucket.com/albums/dd272/808drifter_2007/gt2871rs.jpg

Walbro 255 fuel pump (brand new)
-$75
Peak performance PRO tranny mount (Brand new)
-$60
Blitz air filter - $40
Greddy Intake kit w/ t28 piping - $100
Euro spec gauge cluster (goes to 240kmh) - SOLD
NGK iridium spark plugs for CA18 heat range 7 - $30
Sparco hood pins - $5 (i have 2 sets of these) - $SOLD
Momo steering wheel w/circut sports quick release and sparco hub adapter/ extender - $SOLD
Nissan center piece single din with 2 gauge spots (FOR RHD CARS ONLY) - $SOLD
Apexi auto timer - $75
Circut sports alum overflow tank (brand new) - $ 90 SHIPED!!!
Custom metal fan (used on my old build with electric fans drifted ALL DAY LONG AND RACED NEVER even got close to overheating, use with caution will take fingers off with no problem, looks heavy but is much lighter then stock) - $100 obo?
http://i220.photobucket.com/albums/dd272/808drifter_2007/misc.jpg
Bride Gardis III Red w/ super low seat rails
$800 FIRM!
http://i220.photobucket.com/albums/dd272/808drifter_2007/seat2.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/seat.jpg
http://a84.ac-images.myspacecdn.com/images01/58/l_c899383f1dc34af696f1079bb89319a3.jpg
http://a219.ac-images.myspacecdn.com/images01/92/l_01275e908114b1dda3b694cdcd8e62d2.jpg
REAL URAS S13 rear spats (painted BWM jet black, never installed on car)
-$100 FIRM
http://i220.photobucket.com/albums/dd272/808drifter_2007/spats.jpg
Power mirors (painted BMW jet black)
-$50

So im willing to ship everything at buyers expense or local pickups are fine and no extra charge. Parts can be picked up in PA.

[infamous240sx]

Really interested in the momo steering wheel,quick release, and hub. How much for shipping to northern california 94501? Do you have anymore pics of those items? Please PM ASAP!

[nissanman22]

pic of the nissan center console for rhd

[808_Drift]

Here are more pics of the steering wheel, sparco hub, and quicky that everyone is asking about.
http://i220.photobucket.com/albums/dd272/808drifter_2007/DSC00396.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/DSC00395.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/DSC00394.jpg
It is for s13 pretty easy to install everything needed is here. Wheel is used so it doesnt look PERFECT there is wear marks on it but no big deal unless you have a show car.

pic of the nissan center console for rhd
Its not the center console its that lil part that goes around your shifter and by your radio (not sure what its called) i fixed the pic and its above in the OP. Sorry i accidently deleted it from my photobucket. It fits 52mm gauges or if you have 60mm's like i did just dremel it out a bit. This is what i was gonna do before i sold the car.

[Maxstyle]

Dammit what I wouldn't give for the motor. I have to rebuild mine now too. Why r u getting rid of the motor set?

[imnotmatt1189]

i'll take the steering wheel/hub/qr. how much shipped?

[P_856]

im very interested in the Momo steering wheel w/circut sports quick release and sparco hub adapter/ extender - $70 how much shipped to 08110 New Jersey or i can wait till u come to pa so it will be cheaper lmk

[808_Drift]

lol WOW i have 5 people lined up for the steering wheel so if the current buyer backs out i will contact the next in line ASAP. I will go in the order i revceved your message. Thanks.

Dammit what I wouldn't give for the motor. I have to rebuild mine now too. Why r u getting rid of the motor set?
You have a CA18? Instead of rebuilding yours you should buy mine :P
Only reason im selling is because im going a different route and im gonna try a turbo or ITB LS1 setup and im going to go to a s14. I spent over 5k in the motor between parts and machine work alone. I have built a few of these Ca's and Sr's and its just time for me to try something new. There is absolutely (sorry i cant spell worth a **** lol) nothing wrong with the engine like i said 0 miles since rebuild. Engine was fully ballanced. Any questions just shoot away. I know im prob asking alot for the engine i just put so much into it.

[badrifter]

Hey just wondering if there is a cat in that exhaust setup??? thanks!

[808_Drift]

Nope you could easily get a high flow cat tho.
Its basically a turbo outlet, downpipe, testpipe, and catback. I will take better picutres and post them in a few mins.
PICS:
http://i220.photobucket.com/albums/dd272/808drifter_2007/DSC00398.jpg
http://i220.photobucket.com/albums/dd272/808drifter_2007/DSC00399.jpg

[808_Drift]

UPDATE: Ok i am shiping everything to PA in 2 days so anything not spoken for by then will need to wait about a week untill its in PA. I will stay updated with this thread and as soon as i have the stuff in PA i will resurect this thread from the dead. So for the next 2 days i can ship straight to you.

I have also added a circut sports alum opverflow tank i found in my mountain of parts. Its brand will do $90 shiped

[infamous240sx]

Since i was the first to want to buy ur momo sterring wheel, hub, and quick release i get frist priority right? I'll buy it tonight if u give me ur email address so i can send paypal ASAP. Thanks!

[DALAZ_68]

i would have bought that CA off u if i hadnt givin my pops money

atleast the turbo would have been a sweet upgrade...
my CA t25 is just not cutting it for me... :(

GLWS though...if u happen to have the turbo another week or so ill buy then...i might have cash :goyou:


well atleast how much for the stage 2 clutch and 444 injectors (are the injectors new/used/refurbished)

[808_Drift]

Since i was the first to want to buy ur momo sterring wheel, hub, and quick release i get frist priority right? I'll buy it tonight if u give me ur email address so i can send paypal ASAP. Thanks!
Sorry i had a 2 Pms before your post. If they back out your next.


i would have bought that CA off u if i hadnt givin my pops money

atleast the turbo would have been a sweet upgrade...
my CA t25 is just not cutting it for me... :(

GLWS though...if u happen to have the turbo another week or so ill buy then...i might have cash :goyou:


well atleast how much for the stage 2 clutch and 444 injectors (are the injectors new/used/refurbished)

Umm im not im trying to sell the whole thing as a set. It would be a good upgrade for someone who has a stock CA or wants to do a swap. If its not sold in a while then maybe ill think about parting it. Or if the buyer doesnt want/need it.

[DALAZ_68]

Sorry i had a 2 Pms before your post. If they back out your next.




Umm im not im trying to sell the whole thing as a set. It would be a good upgrade for someone who has a stock CA or wants to do a swap. If its not sold in a while then maybe ill think about parting it. Or if the buyer doesnt want/need it.

:bowdown: please lemme know :bowdown::bowdown:

[808_Drift]

:bowdown: please lemme know :bowdown::bowdown:
you could just buy the motor set and turbo:D Ill give you adeal if you buy both lol
you know you want to :P

[808_Drift]

Gauge Cluster SOLD
Red Nissan Center piece for RHD S13 - PENDING
Uras Rear spats - LOWERED TO $100

all pms replied

[808_Drift]

STEERING WHEEL/HUB/ QUICK RELEASE - SOLD
Rest is still for sale!!!!

[808_Drift]

NIssan Red Center Piece gauge pod thingy - $SOLD
All Pms replied! I accidently deleted all of my pms :doh: so if i missed anyone let me know and ill get back to you ASAP. :D

heres a link to the greddy intake kit i have for only $100!!!!!
thats a $160 discount! Its brand new in the box never used!

[exitspeed]

http://www.zilvia.net/f//showthread.php?t=126659

This includes not trying to follow the guidelines set on the forum. I hate having to lock premie's threads for this stuff.

Too many bumps.