PDA

View Full Version : Anyone Interested...? SR20DET

TeamSilvia
10-15-2002, 06:45 AM
Ok... here's the deal I have 4 SR20DET (S13 Blacktop) motors and trannys.  I do not have the ECU and or wire harness for these motors.
The motors and trannys have approx. 40k miles on them.
Yes...they do have the turbo units intact and on the motor!

Remember this is for Motor and Transmission only!
$1,500.00

If I obtain any other parts (ecu; wireharness) I will update the post.

Let me know if you are interested.
silviase
10-15-2002, 07:45 AM
great price! where are you located? and how much to ship to south florida?
TeamSilvia
10-15-2002, 01:41 PM
I am in NY.
Shipping is roughly $100.00 via special courier.
four
10-15-2002, 05:02 PM
im in NJ, where in NY are you at?  I wanna take a look at em.  email me

[email protected] or [email protected]
S14lover
10-15-2002, 06:26 PM
does it have a crank angle sensor does it have its side mount intercooler is the oilpan dented?...do you have pics?
oberkill
10-16-2002, 12:07 AM
Does it come with the ignitor? How about the coilpacks? If not its really not that good of a deal. Not to jack your post or anything but I have people e-mailing me everyday trying to find parts for their incomplete SR's. It usually ends up costing them more than just buying a complete swap.

Engine 1500
Harness 450
Ignitor 200
ECU 225
coilpacks 50

Thats 2450 (though not sure on the coilpacks and ignitor). I can sell front clips for 2500-2550 and there are others on here that do it cheaper. If it does come with the ignitor and coilpacks then it is a good deal! If you are looking to get some harnesses let me know I can point you in the right direction.

Alan
TeamSilvia
10-16-2002, 06:01 AM
Ok here's the skinny...
These were just delivered to me this past weekend from Japan.  I do "NOT" have the harnessess or ECU's.
The motors do have the coilpacks, and crank angle sensors.
The oilpans are not dented.
As with most places that sell motors there is no warranty.
I will post some Pictures when they become available, (hopefully sometime this weekend) when they get unloaded from the truck.

Let me know if you have any questions. &nbsp;<img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>
S14lover
10-16-2002, 08:08 PM
OUCH ok then how about side IC plus the piping?