huevos
10-14-2002, 09:03 PM
I doubt this is a question that can be answered without someone looking at my car, but I don't have any money so I thought I would at least ask the advice of all the zilvia car gods <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>
I was driving my 89 coupe home the other night when I noticed some clanking/humming/grinding noises which got worse when I turned the wheel, also felt some vibration in the steering wheel.
when I parked the car ps fluid was dripping out of the car. fluid was collecting on the inside of what I guess is the ps pump pulley, the top most pulley closer to the passenger side,but I couldn't see where fluid was coming from. I thought maybe it has a bad seal? The ps pump was shaking and the pulley was wobbling just a bit.
All of the fluid draind out. I filled it back up and drove it a few blocks (not my brightest moment <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/withstupid.gif" border="0" valign="absmiddle" alt=':withstupid:'> ) the same things happened again only now the car won't start. It turns over but won't start. Did power stearing fluid got on something it shouldn't have?
I was driving my 89 coupe home the other night when I noticed some clanking/humming/grinding noises which got worse when I turned the wheel, also felt some vibration in the steering wheel.
when I parked the car ps fluid was dripping out of the car. fluid was collecting on the inside of what I guess is the ps pump pulley, the top most pulley closer to the passenger side,but I couldn't see where fluid was coming from. I thought maybe it has a bad seal? The ps pump was shaking and the pulley was wobbling just a bit.
All of the fluid draind out. I filled it back up and drove it a few blocks (not my brightest moment <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/withstupid.gif" border="0" valign="absmiddle" alt=':withstupid:'> ) the same things happened again only now the car won't start. It turns over but won't start. Did power stearing fluid got on something it shouldn't have?