belt size

[KAZA]

sup,this is a noob question but i need some help looking for the undrive crank pulley belt size i looked online but wasnt to sure on wat size its for a KA24de....?


thx.

[drifting.8]

Search Zilvia

[KAZA]

they would have it like that?

[LA_phantom_240]

No.
Go to autozone's website and find the stock belt, and get it about 3 inches shorter.
Example, an 850k5 will be an 85" 5 rib belt. You would look for an 820k5 in that case.
Its not hard.

[KAZA]

alright thx ill look it up

[S14DB]

No.
Go to autozone's website and find the stock belt, and get it about 3 inches shorter.
Example, an 850k5 will be an 85" 5 rib belt. You would look for an 820k5 in that case.
Its not hard.

850 would be a 850mm, 820 is 820mm. 85" is just over 7ft.

[punxva]

or look at the manufactures webiste... UR and ASP both have the gates belt part numbers on them

[LA_phantom_240]

850 would be a 850mm, 820 is 820mm. 85" is just over 7ft.

Dude. I work there. It says clear as day, "850K5, 5 rib serpentine belt, 85" effective length". Which means that if you cut the belt and lay it out, it is 85 inches. An 850 belt is big, like chevy 3.1 v6 serpentine belt kinda big. Our belts are typically in the 300-400 range of length, which is roughly 10-14 inches once you get it around the pulleys.