View Full Version : HELPT! tranny crossmember bolts, identify!
devonkyle77
01-23-2008, 04:33 PM
i have lost my crossmember bolts for the transmission (where the trans mount bolts to. i know they are 4 large bolts, which i believe to be 14mm, and about 3 inches long. anyway, i have lost them in my giant bucket of bolts.
can anyone describe what the head of the bolts looks like, or a picture would be even better
and dimensions, thread pitch, head size, anything!
thanks guys!
Bubba
01-23-2008, 05:06 PM
17mm head and just a little over 2 inches long if I remember correctly. :bigok:
johngriff
01-23-2008, 05:07 PM
and the heads have little divets on them, where as the ones for the loop have a flat smooth head on them.
devonkyle77
01-23-2008, 05:22 PM
little divets? like that little line that is like 3mm long? or like a sunken in head?
Bubba
01-23-2008, 05:47 PM
somewhat of a sunken in head...
tt99ol
01-23-2008, 05:49 PM
thread pitch is 8mm x 1.25
projectRDM
01-23-2008, 06:32 PM
Use seat bolts, they're a direct replacement but with a washer and 14mm head. And you can find them in any Nissan at any yard. Snag a couple from your passenger side until you can get replacements if you're really pushed.
devonkyle77
01-27-2008, 11:11 AM
so there is no number or symbol indicated on the bolts, like a 7, 9, or the two squiggly lines?
just a sunken in head?
de89coupe
01-27-2008, 11:46 AM
here you go.......
http://images.google.com/imgres?imgurl=http://importnut.net/240pics/motormount/nismo_mm_18.JPG&imgrefurl=http://importnut.net/nismomm.htm&h=640&w=480&sz=62&hl=en&start=9&tbnid=BRGYJKIk-Y_HnM:&tbnh=137&tbnw=103&prev=/images%3Fq%3D240sx%2Btranny%2Bbolts%26gbv%3D2%26sv num%3D10%26hl%3Den (http://images.google.com/imgres?imgurl=http://importnut.net/240pics/motormount/nismo_mm_18.JPG&imgrefurl=http://importnut.net/nismomm.htm&h=640&w=480&sz=62&hl=en&start=9&tbnid=BRGYJKIk-Y_HnM:&tbnh=137&tbnw=103&prev=/images%3Fq%3D240sx%2Btranny%2Bbolts%26gbv%3D2%26sv num%3D10%26hl%3Den)
that will show a pic of the bolt heads. some of the xmember bolts have a 1/16th to an 1/8th at the tip of the bolt where there are no threads so it is easier to get the bolt started. otherwise its just a regualar looking bolt.
devonkyle77
01-27-2008, 11:55 AM
ah, good call
thanks man!
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.