Ka24de Custom Intake Manifold ---- Look

[BobbyDigi]

SETUP WILL SUPPORT 800 HP @ 80% DUTY CYCLE
SETUP WILL SUPPORT 900 HP @ 90% DUTY CYCLE
THIS SETUP HAS LESS THAN 700 MILES ON IT

SOME QUICK NOTES
- SETUP FOR 8 INJECTORS
- INCLUDES FOUR 30 LB (315cc) HOLLEY injectors
- INCLUDES FOUR 96 LB (1000cc) ACCEL injectors
- INCLUDES 2 RAILS & 8 INJECTORS
- COMPLETE TUNING RANGE FOR DUAL BOOST SETTINGS

This intake manifold was designed to allow for the choice of running a normal 1 stage boost setting or dual stage boost settings. The base power ranges would be 450-650 hp and 650-850 hp. 900 hp is quite feasible with the exact setup that you are looking at.
As for the specs of the setup; The rails are constructed of aluminum, there are custom supports that extend from the rails to ensure a perfect fit, custom injector bungs were welded in place, the EGR passage has been welded shut, the intake flaps have been removed.
---- the injectors can run in sync (all 8 all-time), in sequence (4 on low rpm, 8 on high rpm), in stages (4 on low boost setting, 4 on high boost setting), or single stage (whichever 4 are chosen) ----
the idea behind it is for more fuel and better bottom end with superior top end fuel support.

The entire project ran about 1000 dollars and took about 30+ man-hours. I'd like to recoup some of that based upon what soemone would deem "fair". Also, i want someone to put it to good use as i have refrained from building such an integrated build. The setup that i was running made 556 RWHP and believe me when i say that the fuel system was not the "limiter... this will support 800-900 HP.

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man11.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man13.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man8.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man7.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man6.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man5.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man4.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man2.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man3.jpg

http://img.photobucket.com/albums/v202/s15driftking/Random%20People/man1.jpg


I'M SEEKING 400.00


[email protected] ([email protected])

PM OR CALL (AFTER 6PM)

330.464.0774

NICK

[BobbyDigi]

bump numero uno

[BobbyDigi]

come on dudes, this is what it will take to be a big dog

[BobbyDigi]

i will separate (and sell just a rail with injectors) if people just want a rail with either 1000cc or 315 cc injectors....

[BobbyDigi]

chucked it on ebay guys, thanks for looking htough, mods can lock now

[tschad]

your an idiot.

thant is not custom.

[panama DRIFT]

how is this not closed already